Grid view List view

Showing 13129–13140 of 19523 results

P-HA-RPS-32200000

¥6,035.00

argument
Input voltage: 24VDC (according to [3])
Maximum output current: 10A (according to [3]), but in some cases the maximum output power is up to 5KW and the maximum output current is 300A (according to [5]), which may refer to other models or configurations in the series.
Ambient temperature: -10 to +50 °C (without freezing) (according to [2])
Light source: Visible red semiconductor laser, wavelength 655 nm (according to [2])
specification
Type: Small standard type, possible for DCS distributed control systems (according to [4])
Detection distance: 500 mm (according to [2])
Power supply: dual power supply, power supply and control power supply respectively (according to [5])
Encoder interface: Rich, support hall, incremental, Tonomagawa absolute encoder and other encoders (according to [5])
dimension
Product size: 10cm × 12cm × 4cm (according to [3])

9905-973

¥6,526.00

argument
Number of channels: 8 channels
Relay type: single pole double throw
Contact current: 10A
Contact voltage: 250 AC/DC
Power supply voltage: 24 volts DC
Operating temperature: -40°C to +85°C
Storage temperature: -55°C to +125°C
Protection level: IP67
Current range: ±10-±250mA
Input impedance: 200Ω
Nominal voltage: 24 Vdc
Output voltage: 24VDC (optional 48VDC)
Output current range: 4~20mA
Resolution: 12 bits
Output accuracy: less than 0.25%

CC-PFB401

¥6,032.00

argument
Voltage: The input voltage may include 24VDC (according to [3]) or a wider voltage range, but it depends on the application environment. Output voltage is also supported at 24VDC (according to [3]).
Current: According to [5], the current ranges from 100-400A, but please note that this may be different from the actual operating current of the module, as fieldbus interface modules usually do not handle such large currents directly.
Output current: For analog output, a current output of 4 to 20mA is usually supported (according to [3]).
Voltage range: May include 220VDC (according to [3]).
Communication rate: Several Fieldbus protocols are supported, including H1 FOUNDATION Fieldbus, and the communication rate depends on the protocol used.
Available cycle: 250, 500 ms; 1, 2, 4, 8, 16, and 32 seconds (according to [1]).
specification
Product type: Fieldbus interface module
Module type: Series C module
Physical interface: H1 FOUNDATION Fieldbus
Configuration: Non-redundant or redundant (side-by-side)
Maximum number of fieldbus devices per H1 network: 16

FBM233 P0926GX

¥5,266.00

argument
Power Supply type: Different types of power output may be supported, such as direct current (DC) or alternating current (AC), to suit the power requirements of different devices.
Voltage range: A wide range of voltages is typically supported to accommodate the power requirements of various industrial applications.
Current capacity: has sufficient current output capacity to meet the power requirements of various devices and modules in the system.
Frequency: May be involved in specific applications, but specific values need to refer to official documentation or information provided by the manufacturer.
specification
Product Type: The FBM233 P0926GX is a power supply module, often described as an input/output (I/O) module or a control pulse module, depending on its application scenario and connection mode.
System support: Usually used in industrial automation and control systems, compatible with PLC, DCS, SCADA and other systems.
dimension
Size: Depending on the search results, specific size information may vary by product version or manufacturer. It is described as being 36*42mm (possibly the size of the module itself), but other search results do not give a specific size directly.

UR9EH

¥5,262.00

argument
Input voltage range: The input voltage of the UR9EH may vary depending on the description. Some descriptions indicate that the input voltage is 12-48VDC, while others mention 24VDC or 125VDC.
Output voltage: 5VDC (mentioned in [1]), or 24VDC (mentioned in [3]).
Output current: Max. 10A.
Efficiency: greater than 90% (mentioned in [1]).
Operating temperature range: May vary depending on description. Such as -20°C to +50°C, or -40°C to 70°C.
specification
Product Specification: UR9EH may be a motor controller module, or a control board module, for industrial automation systems.
Processor: 32-bit RISC processor (mentioned in [1]).
dimension
Dimensions: 170mm x 105mm x 32mm (mentioned in [1]), or 120mm x 60mm x 80mm (mentioned in [3]). Sizes may vary depending on product version or manufacturer.
weight
Weight: about 120g (mentioned in [1]), or 0.5kg (mentioned in [3]). Similarly, weight may vary by product version or manufacturer.
series
Series: UR9EH may belong to a specific family of industrial automation control modules, but the specific family name may vary from manufacturer to manufacturer.

8B0C0320HW00.002-1

¥6,235.00

argument
Voltage: 220V
Current: 40A
Power: 9KW
Communication rate: Supports a variety of rates, including 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, up to 12MBit/s
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W
specification
Package/specification: 125.210232 (unit not specified, but generally considered to be mm)
Packing: In boxes
Minimum packing quantity: 3
dimension
Package size 125.210232 (may be in mm)

3625A

¥6,235.00

argument
Number of channels: 8
Output type: switch quantity
Output current: 2A
Load voltage: 250V AC/DC
Response time: ≤2ms
Power consumption: ≤5W
specification
Product specification: Triconex 3600 series I/O module
Support system: PLC/DCS system

DX581-S

¥6,235.00
argument
Output voltage: 24VDC (provided by some information sources)
Operating voltage: 240VDC power may also be included (but note that this may refer to different parts or configurations of the entire system)
Operating temperature range: The temperature range given by different information sources varies, such as -40 ° C to +85 ° C and -40 to 100 ° C, which may vary by model or configuration
Current: 100-400A (provided by some information sources)
specification
Distributed and modular: DX581-S features a distributed and modular design for easy installation, maintenance and expansion
Communication interface: Through the industry standard fieldbus to communicate with the parent controller and PLC
Size and weight
Size:
100mm x 50mm x 20mm (provided by some information sources)

EP3-E-4-EN

¥6,235.00
series
EP3-E-4-EN belongs to a specific family of drives or control systems that may be designed for industrial automation applications.
Parameters and specifications
Power supply voltage:
230V (200V-240V ± 10%)
400V (380V-480V ± 10%)
Heavy duty rating:
230V: 0.37-2.2kW
400V: 0.37-15kW
Power supply phase number:
230V-1 phase
400V-3 phase
Control mode: open loop vector control or V/Hz induction motor control
Energy efficiency: Up to 98%
Overload rate: up to 180%, allowing overload time up to 3 seconds

FBM233

¥4,521.00
Communication:
The front end of the FBM233 module usually has an RJ-45 connector (10/100Mbps copper Ethernet connection) for connecting dual-port Ethernet devices.
It is capable of communicating with up to 64 field devices.
Software support:
I/O software drivers can be downloaded from the available protocol library to configure the FBM233 to recognize the specific protocol used by the device.
Size and weight
Size: The exact size may vary depending on the model or configuration. Some information indicates that it measures 5.1 cm x 12.7 cm x 11.4 cm, but please note that this may be related to a specific model or configuration.
Weight: The exact weight may also vary by model or configuration. Some information indicates that its weight is 0.3 kg, but please refer to the specific product data manual in practical application.

VE4006P2

¥5,680.00
Parameters and specifications
Power Supply:
Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W.
With DC1500V voltage isolation and reverse protection function.
Communication protocol:
Compatible with RS-232C/RS-422A/RS-485.
Supports a variety of communication protocols, enabling seamless connection and communication with other industrial automation equipment and systems.
Data rate:
Supports data rates up to 115.2 kbps.
Working environment:
Operating temperature: -10-70℃ (optional wide temperature range -40~+85℃); Some information mentions operating temperatures from -20°C to +50°C and storage temperatures from -40°C to +70°C.
Relative humidity: ≤90% (no condensation).

SDCS-CON-4

¥6,528.00
argument
Working voltage: 24VDC
Operating temperature: -20°C to 60°C
Storage temperature: -40°C to 85°C
Humidity: 5% to 95% non-condensing
Current: 100-400A (provided by some information sources)
Rated frequency: 60HZ (provided by some information sources)
specification
Switch quantity: Maximum 40 in and 40 out
Analog quantity: Maximum 8 in and 4 out
Installation method: guide rail installation, fixed hole installation
Instruction processor: hard PLC