Grid view List view

Showing 12733–12744 of 19460 results

REF615C-D

¥4,529.00

Parameters and specifications
Model: REF615C-D
Brand: ABB (sometimes referred to as GE, but according to most information, this is an ABB product)
Applications: Usually used in power systems, including power substations, power distribution, power quality monitoring, motor protection and equipment protection.
Functions: With current and voltage monitoring, overcurrent and overvoltage protection, fault detection, automatic reclosing and communication interface functions.
Communication protocols: Support IEC 61850, Modbus and other communication protocols, easy to communicate with other devices and monitoring systems.

PPC905AE101

¥6,025.00

Parameters and specifications
Bus consumption current: 80mA
Total power consumption: 3W
Number of input points: 10
Rated voltage: 24V DC
Continuous allowable voltage: 30V DC
Surge voltage: 35V DC, 0.5s
Logic “0” voltage range: 5V DC, 1mA
Logic “1” voltage range: 15V DC, 1mA
Input delay: 4.5ms
Signal input type: PNP/NPN photoelectric isolation
Cable length (shielded) : 500M
Cable length (unshielded) : 300M
Number of output points: 6
Output voltage: 24V DC or 250V AC
Rated current: 2.0A
Rated current of common end: 10A
PPC905AE101 Current: 5A, 4s@10% duty cycle

IMHSS03

¥5,625.00

Parameters and specifications
Power supply voltage: 24V DC
Rated current: 5A
Maximum current: 10A
Output power: There are 120W and 360W two versions, may vary depending on the configuration or model
Response frequency: 500Hz
Accuracy: ±0.05%FS
Operating temperature range: -25~70℃
Maximum output current: Maximum 5mA per channel
Size and weight
Size: Different sources give different size information. Some say it is 8.0 inches x 2.0 inches x 13.0 inches (20.3 cm x 5.1 cm x 33.0 cm), while others say it is 96mm x 48mm x 16mm.

CP260 3CP260.60-1

¥4,152.00

Parameters and specifications
Voltage: 24V
Current: 100-400A
Weight: 2KG
Structure: modular
Installation method: Installation in control room
LD instruction processor: hard PLC
I/O count: 1
Operating voltage: 48V
Output frequency: 50Hz
Processing speed: 100μs

A6210

¥5,629.00

Parameters and specifications:
​
Number of features: 1
Number of terminals: 16
Maximum operating temperature: 105°C
Minimum operating temperature: -40°C
Max supply voltage: 146 V
Minimum supply voltage: 19 V
Rated supply voltage: 112 V
Processing package: 4 x 4 mm, 0.75 mm HEIGHT, LEAD FREE, EIAJ, MO-220WGGC, QFN-16
Output current: up to 3.0A
Switching frequency: up to 2.0 MHz
Standby current: < 100μA
​
Size and weight:
​
Package size: 4 mm x 4 mm x 0.75 mm

FCP270

¥5,629.00

Parameters and specifications
Memory size: 16 MB SDRAM and 32 MB flash.
Input voltage: 24 V DC typical value.
Power consumption: Maximum 8.5W per non-fault-tolerant module.
Operating temperature: 0 to +60 degrees Celsius (+32 to +140 degrees Fahrenheit).
System environment: can work in harsh G3 environment.
Configuration: Single-processor module, fault-tolerant by two processor modules, the substrate integrated into an interconnect fault-tolerant connector.
Size and weight
Dimensions: Length 14.7cm x width 5.15cm x height 11.4cm.
Weight: 0.6 kg (net), shipping weight 1.5 kg.

PTQ-PDPMV1

¥4,512.00

trait
Multi-channel input and high-speed sampling: The ability to process multiple input sources at the same time, with high-speed sampling capabilities, is suitable for rapidly changing digital signals.
Flexible input type support: Adapt to a variety of different types of digital input signals, including switches, buttons, sensors, etc.
High precision and reliability: Using advanced digital signal processing technology, with fast response, high precision and high reliability.
Extensive communication protocol support: Support UnityPro XL, Concept, ProWORX and other commonly used quantum programming tools, as well as a variety of communication protocols and interfaces.

SC753A-001-01

¥4,625.00

Parameters and specifications
Voltage: According to the search results, there are two different voltage specifications, one is 120VAC and the other is 24V (but this information can be confused with other products, as the same model usually does not have two drastically different voltage specifications).
Current: 2.5A (at 120VAC voltage).
Torque: There are two different torque specifications, one is 277 oz. -inch (holding torque) and the other is 60 pound-inch. This may be due to different units of measurement or application scenarios.
Speed: 3000 RPM.
Step Angle: 1.8 degrees, which determines the Angle of rotation of each step of the motor, is essential for precise control.
Shaft diameter: 0.25 inches, provides sufficient strength and stability.
Frame size: 34.
Installation type: NEMA 34.
Feedback type: encoder.
Shaft type: Round.

SDCS-CON-4

¥5,692.00

Parameters and specifications
Model: SDSS-CON-4
Brand: ABB
Product Type: Programmable Logic Controller (PLC)
Switch quantity: up to 40 in 40 out, analog quantity up to 8 in 4 out
Working voltage: 24VDC
Voltage range: The voltage is 24V and the current range may be from 100A to 400A
Rated frequency: 60HZ
Operating temperature: -20°C to 60°C
Storage temperature: -40°C to 85°C
Humidity: 5% to 95% non-condensing
Size and weight
Size: There is a variety of size information, such as 210mm x 95mm x 25mm, 2859036mm, and 100*100mm.

REM610

¥6,038.00

Parameters and specifications
Function: REM610 provides a variety of protection functions, such as three-phase thermal overload protection, three-phase overcurrent protection, three-phase short-circuit protection, non-directional ground fault protection, three-phase unbalance protection, reverse phase protection, etc.
Communication capability: Support to connect to the control and monitoring system through the serial communication bus to achieve remote control. Local control is possible from a computer connected to a front-end communication port.
Human interface: Includes a liquid crystal display (LCD) and navigation buttons to make local use of the relay safe and easy.
Power supply: The supply voltage is usually 100-240 V AC.

CI532V05 3BSE007297R1

¥4,265.00

Parameters and specifications
Model: CI532V05 3BSE007297R1
Brand: ABB
Product type: controller or interface card module
Functions: Control and monitor various equipment and systems in industrial processes to achieve automated control and data acquisition
dimension
Product net depth/length: 140 mm
Product height: 30 mm
Net width: 360 mm

PXI-7852R

¥6,250.00

argument
Number of analog input channels: 8
Number of analog output channels: 8
Number of I/O channels: Depending on the search results, there are 96 and 24 channels, depending on the actual product
Analog input sampling rate: up to 750 kHz (independent sampling rate), or up to 500kS/s
Analog output update rate: 1 MHz (independent update rate)
Analog input/output resolution: 16 bits
Analog input/output voltage range: ±10 V
Digital I/O speed: up to 40 MHz, or up to 10MHz
Onboard memory: 192 kB
Maximum clock rate: 40 MHz
specification
Form Factor: PXI/PXI Express
PXI Bus Type: Compatible with PXI hybrid buses
Operating system/Target FPGA: Windows real-time system
Module Width: specifies the width of one slot
RoHS Compliant: Yes
Size and weight
Dimensions: Length 16 cm, width 10 cm (excluding connectors)
I/O connector: 68-pin VHDCI female connector
​