Grid view List view

Showing 12481–12492 of 19460 results

SPNPM22

¥6,350.00

argument
Voltage: DC20-50V, also said to be 24Vdc/120Vac
Current: 100-400A (This range may vary depending on the application or configuration, please refer to the product manual)
specification
Type: May be a stepper driver, PLC module card controller or network processor module, depending on its application scenario
Communication protocol: Support RS-485 bus and MODBUS-RTU protocol, can achieve remote reliable control
Built-in function: Built-in single-axis controller function, support position control and speed control two modes, the user can set the current, subdivision and lock the current size and other parameters through the bus
dimension
Volume: 118mmx76mmx33mm
Specification: Another claim is 101623 (may be a different model or configuration size)
weight
Net weight: 0.3kg (this is based on stepper drive data)
Weight: It is also said to be 1KG or 2KG

MVI56E-MNETXT

¥6,308.00

argument
Voltage: Usually 24V, but may vary depending on the application environment and configuration
Current: The support range may be between 100-400A, but the specific current parameters need to be determined according to the actual configuration and application
specification
Type: MNETXT model in the MVI56E family, designed for Rockwell Automation’s ControlLogix processors
Protocol support: Support Modbus TCP/IP, EtherNet/IP and other network communication protocols
Environmental adaptability: Can operate in extreme temperature ranges (-25°C to 70°C) and has a coating that provides protection under harsh or corrosive conditions
Size and weight
Weight: Approximately 1.6kg to 2kg

PCI-6115

¥6,409.00

argument
Input voltage: 24VDC, but supports a wide range of input voltages, including 85-264V AC, 47-63 Hz or 110-370V DC
Output voltage: 24V DC
Output power: 450 W
Maximum output current: not given directly, but usually related to output power and voltage
Operating temperature range: -40°C to +70°C
specification
Analog input: 4 high-speed analog inputs, each channel 10 MS/s
Analog output: 2-channel 12-bit analog output, 4 MS/s single-channel update rate, 2.5 MS/s dual-channel update rate
Digital I/O: Eight digital I/O lines
Counter/timer: 2 24-bit counters
On-board memory: High capacity on-board memory (32 or 64 MS)
Input range: Extended up to ±42 V
dimension
Physical dimensions: 166mm x 112mm x 36mm

ICS TRIPLEX T8461

¥6,309.00

argument
Power supply: The system power supply voltage range is 20 to 32 volts DC (Vdc), and the working output/field voltage range is 18 to 60 volts DC.
Output capability: The T8461 module provides a digital output signal and is capable of connecting up to 40 field devices.
Output channels: The module contains 8 outputs, each with an independent power pack of 5, providing greater flexibility and control.
Incident reporting: Support for on-board Incident Sequence (SOE) reporting with a resolution of 1 millisecond (ms) to help quickly locate problems.
specification
Type: TMR 24V DC digital output module.
Hot replacement capability: Can be hot replaced online, using a dedicated Companion (adjacent) slot or SmartSlot (one spare slot for multiple modules) configuration.
Diagnostics and self-tests: Comprehensive, automatic diagnostics and self-tests are provided, with automatic line monitoring for each channel.

CI856 3BSE026055R1

¥8,069.00

argument
Voltage: 24V
Current: The support range may be 100-400A, but the specific current parameters may vary depending on the application environment or configuration
specification
CI856 3BSE026055R1 is a communication system module from ABB that enables communication functions in industrial automation systems
Supports the CEX bus for power supply and hot swap
S100 I/O communication can be realized in AC 800M controller through communication interface
dimension
Width: 59 mm (2.3 in)
Height: 185 mm (7.3 in)
Depth: 127.5 mm (5.0 in)

A6500-CC

¥6,359.00

argument
Communication protocols: Support ModBus TCP/IP, ModBus RTU, OPC UA and other communication protocols.
Interface capabilities: With multi-channel analog input and output capabilities, you can receive analog input signals from different sensors or signal sources, and support a variety of output types.
Counting function: Usually with pulse counting and high-speed counting capabilities, you can accurately count the number of pulses received by the input channel to achieve the measurement and monitoring of parameters such as motion, speed, flow.
specification
Function: Mainly used to build a complete API 670 standard device protection monitoring system, capable of reading the parameters of all modules of the CSI A6500 ATG and output these parameters via ModBus TCP/IP or ModBus RTU.
Application: Widely used in turbine, gas turbine, compressor and hydraulic turbomachinery and other rotating equipment protection monitoring system.

BJZCAT868-1

¥6,295.00

argument
Working voltage: 220V
Output frequency: 350kHz
specification
Brand: It could be General Electric (GE) or another manufacturer
Model: BJZCAT868-1
Type: Controller/Driver Power module
Product certification: 54100
Series: Module/Controller/motor

FBM233

¥4,652.00
argument
Voltage: The specific voltage may vary from application to application, but generally supports a stable voltage output, which can be a direct current (DC) or alternating current (AC) power supply.
Communication rate: Supports Ethernet network transmission rates of 10 Mbps or 100 Mbps.
Power distribution: Multiple power output channels can supply power to multiple devices at the same time.
Protection function: including over voltage protection, over current protection and short circuit protection, to ensure the safe operation of the connected device.
Power monitoring: The ability to monitor the status of the power supply, including voltage and current, in order to monitor the health of the power supply in real time.
specification
Application: Widely used in industrial control system, PLC system, DCS system, instrument equipment, electronic manufacturing and other fields.
Interfaces: Equipped with communication interfaces for data communication and integration with other devices and systems.
Programmable: Allows users to configure output voltage and current parameters.

FBM233 P0926GX

¥6,035.00
argument
Power supply: Support direct current (DC) or AC (AC) power supply, such as 200VDC or 24VDC
Frequency: such as 1020Hz
Number of channels: There may be multiple channels, such as 1*8 channels
Communication interface: Supports a variety of communication interfaces, such as Modbus, Ethernet, RS-232, RS-485 and so on
specification
Function: The FOXBORO FBM233 P0926GX is described as a power module and a control pulse module, so it may have both power and control functions.
Compatibility: Compatible with FOXBORO series devices and systems and supports Modbus Master drivers
Size and weight
Dimensions: Dimensions may vary by manufacturer and product model, there are references to dimensions 5.1 cm x 12.7 cm x 11.4 cm, and there are references to specifications 36*42mm
Weight: Approximately 0.3 kg or 0.36kg

A6370D

¥6,352.00
argument
Input signal type: voltage, current, resistance, etc
Accuracy:
Universal accuracy: may vary depending on the application scenario, but is ±0.5 ° C for temperature measurement
Accuracy may vary in other application scenarios, depending on the measurement object and configuration
Resolution: The specific value is not explicitly given, but the higher the resolution, the more accurate the data
Sampling frequency: The higher the sampling frequency, the better the real-time performance
Measuring range: -270℃ to +1260℃ (suitable for temperature measurement)
Response time: T90<150ms
Operating temperature range: -55℃ to +125℃
Voltage: It may vary depending on product configuration and application scenarios, with 24V and 220V mentioned
Current: May vary depending on product configuration and application scenarios, there are references to 100-400A

UDC920BE

¥6,585.00
argument
Communication rate: Supports a variety of communication rates, such as 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, up to 12MBit/s.
Lightning protection: Has 4000V lightning protection capability.
Overcurrent protection: 1.5A overcurrent protection.
Surge protection: 600W surge protection function.
Optical fiber wavelength: Support multi-mode 850nm, 1310nm and single-mode 1310nm, 1550nm.
Transmission distance: multi-mode fiber up to 2Km, single-mode fiber up to 20Km, more distance optional.
specification
Product type: Fieldbus output module.
Power input: DC(9-36)V wide power input.
Industrial design: EMC test certification.

CI855K01 3BSE018106R1

¥6,523.00
argument
Product Number: 3BSE018106R1
Product model: CI855K01
Transmission speed: 10 Mbit/s
Data transfer rate: 200 Datasets/s
Maximum number of units on the CEX bus: 12
Connector: RJ-45 female head (8 pins)
24 V Power consumption Typical value: 150 mA
Operating temperature: Maximum 55 °C
specification
System environment: normal temperature
System capability: Stable
System function: Normal
Size and weight
Size: Approx. 18.5 cm x 5.9 cm x 12.75 cm
Weight:
0.7 kg (standard weight)
0.36kg (data provided by a supplier)
2KG
Shipping weight: 1.5 kg