Grid view List view

Showing 12301–12312 of 19460 results

HIMA F8650X

¥4,265.00
Parameters and specifications
Input voltage: 24V DC
Output voltage: 0~10V DC
Maximum output current: 1A
Operating temperature: Usually range from -40°C to 85 °C, but there are also claims of -40°C to +70°C
Storage temperature: -55°C to +85°C
Relative humidity: 5% to 95% (no condensation)
Communication protocols: Support a variety of communication protocols, such as Modbus, Profinet, Ethernet/IP, etc
Compliance: Meets IEC 61508 SIL 3 standards
Processing power: Multi-core processor architecture provides powerful processing power
Size and weight
Size: 120mm x 80mm x 30mm
Weight: About 3.3KG

CLS216 105996005

¥5,366.00
Parameters and specifications
Model: CLS216
Part number: 105996005
Pressure range: 0-100 psi
Accuracy: ±0.25%, some say ±0.1%, the exact accuracy may vary by application or production batch.
Output signal: 4-20 mA DC
Working power supply: 12-32V DC, and other information indicates that the controller version of the working power supply is 24V DC±10% 50/60Hz, 8W.
Operating temperature: -40 ° C to 85 ° C. The operating temperature of the controller version ranges from 0 ° C to +50 ° C, and the storage temperature ranges from -20 ° C to +70 ° C.
Waterproof rating: IP65, suitable for use in harsh environments.
Material: Stainless steel, corrosion resistance and long service life.
Connection diameter: 1/4 “NPT.

PCD230A

¥6,235.00
Parameters and specifications
Number of channels: With 4 channels, each channel has 16 bit accuracy.
Power supply: Supports dual power supply redundancy input, voltage range is 9-30V DC, typical value is 24V DC, power consumption is less than 1.5W. With DC 1000V voltage isolation and reverse protection function.
Relay alarm output: Provides alarm output for fiber link faults and power supply faults. The contact capacity is DC 48V/1A.
Communication rate: Through the DeviceNet bus standard, the communication rate can reach 500K.
Fiber characteristics: Support multi-mode and single-mode fiber, wavelength including 850nm, 1310nm, etc., transmission distance up to multi-mode 2Km, single-mode 20Km, longer distance optional.
Size and weight
Size: The overall size is 132mm×105mm×52mm.
Weight: 800g net, there is also information that its weight is about 1.2kg

LDGRB-01

¥5,265.00
Parameters and specifications
Motor power range: 0.12~ 200kW
Torque range: 85~18000 nm
Ratio range: 5~28000
Input speed range: 750 to 3000 rpm
Output speed range: 0.05~500 rpm
Rated voltage: 380 V
Rated frequency: 50 Hz
Rated current range: 1.5~350 A
Efficiency: Up to 97%
Noise level: less than 80 dB
Size and weight
Overall dimensions: 132mm×105mm×52mm
Weight: 0.82 kg

IS220UCSAH1A

¥5,200.00

Parameters and specifications
Processor: Freescale 8349,667 MHz processor.
Operating system: Runs on the QNX operating system.
Power supply specification: Rated voltage is 18~36V DC, power is 12 watts.
Operating temperature: between 0 and 65 degrees Celsius.
Cooling method: Natural cooling, no fan required.
Application level: complies with NFPA Class 1 zone 2 specifications.
Communication interface: including Ethernet interface, serial port, etc., used for data exchange with other devices, control systems or networks.
Size and weight
Dimensions: Height is 34mm (door thickness is 33mm).
Weight: Approximately 0.8KG.

IC698CPE030

¥6,235.00

Parameters and specifications
Processor type: 600MHz Pentium-M microprocessor.
Memory: 64 MB user memory and 64 MB user flash memory, both battery powered.
Boolean execution speed: The Boolean execution speed is 0.069 milliseconds per 1000 Boolean contacts/coils.
I/O capacity: Can accommodate up to 32K bits of discrete I/O and 32K words of analog I/O.
Number of blocks: Up to 512 blocks can be downloaded to this CPU, each with up to 128 KB of memory.
Communication interface:
Two Ethernet communication ports support automatic detection of network transmission speed and can be configured for half-duplex and full-duplex operation modes.
One RS232 port.
One RS485 port.
A station manager port.

PMA323BE HIEE300308R1

¥4,152.00

Parameters and specifications
Power supply voltage:
24V DC
220V AC
Current:
100-400A (one way of saying)
12A (disconnected capacity, another way to say it)
Speed Response frequency: 1MS
Memory expansion capacity: 128MB
Program capacity:
8K steps (a term that may be applicable to specific application scenarios)
100KB working memory (another word, may apply to different models)
Size and weight
Dimensions: 120 x 80 x 40 mm
Weight:
2KG
500g
0.8 KG

IC698CPE030

¥4,165.00

Parameters and specifications
Processor type: 600MHz Pentium-M microprocessor.
Memory: 64 MB user memory and 64 MB user flash memory, both battery powered.
Boolean execution speed: The Boolean execution speed is 0.069 milliseconds per 1000 Boolean contacts/coils.
I/O capacity: Can accommodate up to 32K bits of discrete I/O and 32K words of analog I/O.
Number of blocks: Up to 512 blocks can be downloaded to this CPU, each with up to 128 KB of memory.
Communication interface: Two Ethernet communication ports (which support automatic detection of network transmission speed and can be configured for half-duplex and full-duplex operation modes), one RS232 port, one RS485 port, and one station manager port.
Supported protocols: SRTP, Modbus TCP server and client, Ethernet Global Data (EGD), Modbus RTU slave station, SNP, Serial I/O.

TRICONEX 3008

¥5,326.00
Parameters and specifications
Type: Triple redundant industrial controller
Input voltage:
10.5-30 volts (valid)
24V DC nominal
Operating voltage also includes 120Vac (in some cases)
Output voltage: 0-10 volts (RMS)
Output current: up to 24 amps
Frequency: Up to 2500 Hz
Accuracy: ±1%
Operating temperature range:
– 40 ℃ ~ 70 ℃

SCYC51010

¥6,205.00
Parameters and specifications
Brand: ABB (Some materials also mention that it may be GE or other brands, but ABB is more common)
Functions: Control industrial processes and machines, programmable controller
Operating voltage:
Input voltage: 24 V DC ± 20%
Operating voltage (another word) : 24VDC
Current:
Input current: up to 5 mA (another way of saying is up to 0.5 A)
Another version of the current range: 100-400A
I/O points:
Number of words entered: 16
Number of words output: 16
Communication interface: Support a variety of communication interfaces, including Ethernet, serial communication (such as RS-485, communication rate 9600bps)
Processing speed: 550μs
Program capacity: 300
Data capacity: 200

IC698CPE030-GJ

¥5,268.00

Parameters and specifications
Type: GE (General Electric) digital quantity input card module.
Use: Commonly used in industrial automation and control systems, allowing digital signals to be input into the control system to monitor and control different equipment and processes.
Communication capability: With a communication interface, you can communicate with other control devices and industrial networks to achieve data sharing and monitoring.
Modbus operation: Performing a combination of one read and one write operations in a single Modbus transaction can write to one set of 4 registers and return the contents of another set of 4x registers.

A4H124-24FX

¥4,208.00

Parameters and specifications
Number of ports: 24 100Base-FX Ethernet ports and 2 Gigabit SFP ports.
Throughput: 9.5 Mpps.
Exchange capacity: 12.8Gbps.
VLAN support: Supports IEEE 802.1Q VLAN.
QoS support: Supports IEEE 802.1p QoS.
Connection aggregation: Supports IEEE 802.3ad (LACP).
Protocol support: Support RSTP and MSTP, support IPv4 and IPv6, support static routes and RIP V1/V2.
Size and weight
Dimensions: 17.4 inches x 14.5 inches x 1.7 inches (W x H x D).
Weight: 10.8 pounds.