Grid view List view

Showing 12157–12168 of 19460 results

MVME5500-0163

¥6,205.00
argument
Processor: Powered by a Freescale PowerPC 7447A processor clocked at 1.67 GHz.
Memory: Equipped with 2 GB DDR2 SDRAM and 512 MB NAND flash.
Storage: Built-in DRAM (Dynamic Random access memory) and flash memory for storing the operating system and applications.
specification
Communication interface: Ethernet interface (10/100/1000 Mbps), serial port (1 RS-232, 1 RS-232/422/485), USB port (2 USB 2.0), etc.
Operating system support: Support a variety of embedded operating systems, such as VxWorks, Linux, etc.
Extensibility: Support for adding additional modules and cards to meet the needs of specific applications.

MVME55006E-0163

¥4,251.00
argument
Processor: Based on the MPC7455 or MPC7457 1GHz CPU, it provides powerful processing power.
Memory: Equipped with 512MB ECC SDRAM memory to ensure high-speed data transmission and stability.
Cache: May have 512 KB on-chip L2 cache and 2 MB level 3 cache (may vary depending on the model).
specification
Communication capability: Supports Gigabit E-NET connectivity, providing high-speed and stable network communication capability.
Interface: Dual Peripheral Component Interconnect (PCI) and PMC(Peripheral Component Interconnect) interfaces for easy connection and expansion with other devices.
Operating system and development tools: Support a variety of operating systems and development tools, easy for users to develop and maintain.
Size and weight
Dimensions: Approximately 233.4mm x 160mm

CI871K01 3BSE056797R1

¥4,168.00
argument
Communication speed: CH1 communication speed is supported and can be selected between 10 Mbps and 100 Mbps, these speeds are defined in the IEEE 802.3u 10/100 Base-Tx standard.
Power Supply: 24VDC power supply is received through the CEX bus and its current consumption is up to 250 mA. Under typical operating conditions, the power consumption is 3.8W and the maximum power consumption is 6W.
Communication protocol: Support PROFINET IO communication protocol, which is a widely used in the field of industrial automation Ethernet communication protocol, can achieve efficient and stable data transmission.
specification
Protection Class: According to EN60529 and IEC 529, the module is rated IP20 (but please note that information indicates IP30), which means that it has some dust and water resistance, but it is not suitable for harsh industrial environments.
Interface: Ethernet 10/100BASE-T interface (8-pin RJ45 plug).
Size and weight
Dimensions: 59 x 185 x 127.5 mm (2.9 x 7.3 x 5.0 inches).
Weight: 500g (700g with packaging). Please note, however, that the information states that it weighs 2KG

DS200DCFBG1BJB

¥5,241.00

Parameters and specifications
Purpose: Used to provide control level power supply for drivers and cabinet fans.
Operating voltage: The input voltage range may include 85~264VAC and the output voltage is 24VDC.
Output power: 360W.
Maximum output current: 15A.
Operating temperature range: -25~70℃.
Size and weight
Dimensions: Approx. 115mm x 48mm x 150mm
Weight: About 1.2kg

D136-001-007

¥6,250.00
Parameters and specifications
Brand: MOOG
Model: D136-001-007
Features: PLC capability, high resolution analog input/output and position sensor interface
Purpose: To realize fast and accurate closed-loop control of two hydraulic servo actuators
Design features: Modular structure, the use of common standards, convenient and flexible installation configuration
Number of axes: Designed to provide closed-loop control of up to 30 axes for speed and position
Communication interface: EtherCAT, CAN/CANopen, Ethernet, etc
Optional bus interface: Profibus-DP slave station, EtherCAT slave station
Software support: IEC 61131-3 development environment based on CODESYS 3 (MASS Moog Application Suite)
Size and weight
Product size: 166mm x 112mm x 36mm
Product weight: about 375g

LDGRB-01 3BSE013177R1

¥4,265.00
argument
Motor power range: 0.12~ 200kW
Torque range: 85~18000 nm
Ratio range: 5~28000
Input speed range: 750 to 3000 rpm
Output speed range: 0.05~500 rpm
specification
Installation position Options: M1 to M6
Ambient temperature range: -20°C to +40°C
System capability: Powerful, support multi-tasking
Storage capacity: large memory and storage space, can store a large number of programs and data
Size and weight
Size: 302022 mm (or may vary depending on the model)
Weight: The specific weight is not clearly given, but usually the industrial automation module weight is moderate, easy to install and maintain

IS220UCSAH1A

¥4,258.00
argument
Operating system: QNX
Processor: Freescale 8349,667 MHz
Power supply specification: Rated voltage is 18~36V DC, power is 12 watts
Operating temperature: between 0 and 65 degrees Celsius
Communication interface: Contains multiple female jack connectors, one USB port, and supports Ethernet connection
specification
Design: Individual boxed assembly, front panel allowing connection communication, rear edge with two screw mounting, three side grille openings allowing air flow, designed for base mounting in cabinet
Cooling method: Natural cooling, no fan required
Application level: complies with NFPA Class 1 zone 2 specifications
Size and weight
Height: 34mm
Door thickness: 33mm
Weight: 0.8KG

KUC755AE117

¥6,235.00
argument
Model: KUC755AE117
Type: 3AC servo drive
Rated power: 0.75kW
Maximum torque: 3.0Nm
Power supply voltage: 3AC 200-460 V
Control mode: position control, speed control, torque control
Functions: electronic gear, limit, tracking, soft start, etc
specification
Driver size: 200 mm x 160 mm x 65 mm
Drive weight: 2.5kg
Installation mode: wall-mounted installation
Characteristic and function

PM866AK01

¥5,269.00
argument
Processor model: MPC866
Clock frequency: 133 MHz
Memory: 64 MB, of which 51.389 MB is available for applications and 4 MB flash memory for firmware storage
Power supply: 24 volts DC (19.2 volts -30 volts DC)
Power consumption: At +24 V, the power consumption is 210/360 mA and the power dissipation is up to 8.6 watts
specification
Communication interface: Has two RJ45 Ethernet ports and two RJ45 serial ports, one serial port with modem control signal, the other is isolated, mainly used to connect configuration tools
Support for CPU redundancy: including CPU, CEX-Bus, communication interface, and S800 I/O for higher availability
Interface extension: Has a CompactFlash interface and other possible expansion slots for adding more functional modules
Size and weight
Size:
Dimensions for independent use: width 130mm, height 130mm, depth 190mm (insert depth <250mm after all cables are connected)
19-inch rack mounting dimensions: Front panel 3 height units (U), 21 width units (HP), total width <26 width units (HP), including heat sink insertion depth <250mm

PFSK151

¥6,529.00

argument
Voltage: 24VDC (input voltage)
Current: May vary depending on the application, but generally has a wide current range
Operating voltage: +5V DC, ±10%, maximum 200mA
Temperature range: +0°C to +60°C
Humidity: Maximum relative humidity up to 95% (non-condensing)
specification
Input/Output (I/O) : Typically has 8 inputs and 6 outputs, but the I/O configuration is very flexible and can be scaled up to 142 I/O points
Program storage: Flash EPROM program memory that supports 8K steps
Data storage: 8K word data storage, can store a large number of program data and configuration information
Size and weight
Size: Different sources give different size information. One way to say it is 100 mm x 70 mm x 30 mm, another way is 250 x 190 x 180mm³. This may be due to differences between different models or versions.
Weight: Depending on the source, the weight may be 0.5 kg or 2KG.

KUC711AE101 3BHB004661R0101

¥5,269.00

argument
Component number: IS420UCSBH4A
Manufacturer: General Electric (GE)
Country of Manufacture: USA
Microprocessor: 600MHz Intel processor with 1066MHz Intel EP80579 microprocessor for gas turbine control system
Memory: 256 MB DDR2 SDRAM
Operating system: QNX Neutrino, a real-time multitasking operating system developed specifically for industrial applications that require high speed and reliability
specification
Series: Mark VIe series
Function: UCSB controller
Communication interface: On-board IONet (Industrial Ethernet) interface to support connection and communication with other devices and systems
Input/output channels: Multiple input and output channels are capable of monitoring multiple process variables and performing related actions

5SHX0660F0002

¥5,207.00

argument
Speed control function: used to control the speed of DC motor, to achieve accurate operation control.
Communication interface: May have Ethernet, RS485, USB and other communication interfaces, support a variety of communication protocols, easy to integrate with the existing system.
Power input: Redundant wide voltage (12~48V DC) input, typical operating voltage is 12V/24V/48V, full load power consumption is less than 7W.
specification
Structure: modular structure.
Input/Output: has 8 digital inputs and 6 digital outputs, as well as 4 analog inputs.