Two Ethernet communication ports support automatic detection of network transmission speed and can be configured for half-duplex and full-duplex operation modes.
One RS232 port.
One RS485 port.
A station manager port.
Self-diagnosis function: With comprehensive self-diagnosis capability, it can find and report potential faults in time.
Programmable: Support a variety of programming languages (such as ladder diagram, structured text, function block diagram and C language), easy for users to program and customize according to actual needs.
Processor: Freescale 8349,667 MHz processor.
Operating system: Runs on the QNX operating system.
Power supply specification: Rated voltage is 18~36V DC, power is 12 watts.
Operating temperature: between 0 and 65 degrees Celsius.
Cooling method: Natural cooling, no fan required.
Application level: complies with NFPA Class 1 zone 2 specifications.
Communication interface: including Ethernet interface, serial port, etc., used for data exchange with other devices, control systems or networks.
Motor power range: 0.12~ 200kW
Torque range: 85~18000 nm
Ratio range: 5~28000
Input speed range: 750 to 3000 rpm
Output speed range: 0.05~500 rpm
Rated voltage: 380 V
Rated frequency: 50 Hz
Rated current range: 1.5~350 A
Efficiency: Up to 97%
Noise level: less than 80 dB
Size and weight
Overall dimensions: 132mm×105mm×52mm
Weight: 0.82 kg
Power supply: 220VAC AC.
Power range: from 50W to 3000W.
Communication interface: Support USB, RS232, RS485 and CAN bus communication.
Protocol support: Supports MOTECIAN, MODBUS, and CANOPEN protocols.
Operating system: QNX operating system.
specification
Type: Intelligent servo drive, which is also the main trip package for the main turbine of the Mark VI system.
Function integration: Integrated PLC and motion controller, support ladder diagram programming.
Processor type: High-performance processors, which may include the Atom™ E 3800 series
Memory: Up to 4GB ECC RAM and up to 32GB EMM are supported
Communication protocol: compatible with picmg express r 2.1 and Type 10
Communication rate: from 2400bps to 115200bps
Measurement speed: 10 times/SEC or 80 times/SEC, can be selected by parameter setting
Resolution: Display resolution is 1/100000
Nonlinear error: no more than ±0.05%F•S (10 times/s)
Power supply: DC power supply 12 ~ 30VDC, with anti-reverse protection
Current rating: 1960 A.
Voltage rating: 6000 V.
Switching speed: 10 kHz.
Control mode: pulse trigger.
Heat dissipation mode: air cooling.
specification
Housing size: 250 mm x 150 mm x 75 mm.
Possible applications: power control, converters, energy regulation, motor speed regulation, industrial heating, lighting control, energy feedback, etc.
Size and weight
Dimensions: As mentioned above, the housing dimensions are 250 mm x 150 mm x 75 mm.
Industrial grade design: with vibration resistance, electromagnetic interference resistance and durability, can operate stably in harsh industrial environments
Modular design: easy for users to expand and upgrade, improve system flexibility and maintainability
Multiple input and output channels: Ability to monitor multiple process variables and perform related operations, flexible response to a variety of complex control needs
Communication interface: Equipped with Ethernet or serial communication interface, easy to connect and communicate with other devices or systems
Data acquisition and monitoring: It can collect various data and signals during the operation of the gas turbine, providing the operator with rich information to monitor and analyze the performance of the gas turbine
Type: PXI Embedded controller
Manufacturer: National Instruments (NI)
Operating system: Factory installation Win10(64-bit) and drivers
Size and weight
Dimensions: 115mm x 48mm x 150mm
Weight: Approx. 1.2kg (another saying is 2KG, may vary depending on configuration or version)
series
The PXIE-8840 is part of NI’s PXI family of controllers
Power supply: 220VAC AC.
Power range: from 50W to 3000W.
Communication interface: Support USB, RS232, RS485 and CAN bus communication.
Protocol support: Supports MOTECIAN, MODBUS, and CANOPEN protocols.
Operating system: QNX operating system.
specification
Type: Intelligent servo drive, which is also the main trip package for the main turbine of the Mark VI system.
Function integration: Integrated PLC and motion controller, support ladder diagram programming.
Control mode: Position control mode, speed control mode and current (torque) control mode.
A USB port.
Two distributed as interfaces.
Four remote AS interfaces.
Six local Modbus Plus connections.
Six local Profibus DP connections.
A Modbus connector.
Six local Ethernet TCP/IP connections.
Optional modules: Ethernet, Modbus, Modbus Plus, Profibus, DP, and Sy/Max.
Size and weight
Weight: According to the description of a specific product, the weight is about 0.3673 kg.
I/O Points: 20 universal I/O points that can be configured as digital input, digital output, analog input, or analog output.
Voltage range:
Digital input: 24 VDC
Digital output: 24 VDC
Analog input: 0-10V or ±10V
Analog output: 0-10V or ±10V
Resolution: Input/output simulation: 16 bits
Accuracy: Analog input/output: ±0.1%FS
Scanning time: <2 ms
Power supply voltage: 24 VDC
