KOLLMORGEN S72402-NANANA-NA

Description

KOLLMORGEN S72402-NANANA-NA

Product Parameters

• Input Voltage: 3-phase, 380 – 480 VAC, ±10%
• Input Frequency: 50/60 Hz
• Continuous Output Current: 24 A
• Peak Output Current: 72 A
• Communication Interfaces: Ethernet (supports protocols like EtherNet/IP, Modbus TCP), RS-485
• Control Modes: Torque control, speed control, position control
• Compatibility: Compatible with a wide range of Kollmorgen servo motors and can also interface with some third-party motors with proper configuration.
• Operating Temperature Range: 0 °C to 50 °C
• Storage Temperature Range: -20 °C to 70 °C
• Humidity: 5% to 95% (non-condensing)

Advantages and Characteristics

• High Precision: In a CNC machining center application, the KOLLMORGEN S72402-NANANA-NA servo drive enabled the servo motor to achieve a positioning accuracy of ±0.01 mm. Its advanced control algorithms and high-resolution feedback system ensure precise control over the motor’s movement, which is essential for producing high-quality machined parts. This high precision significantly reduces the scrap rate and improves the overall production efficiency.
• Fast Response: In a packaging production line, the drive’s fast response time of less than 10 milliseconds allowed for quick acceleration and deceleration of the servo motor. This enabled the packaging machine to operate at a higher speed while maintaining accuracy, increasing the production rate of the packaging line by 20% compared to previous systems.
• Easy Integration: The KOLLMORGEN S72402-NANANA-NA supports multiple communication protocols, making it easy to integrate into existing industrial control systems. In an automated assembly line upgrade project, it was integrated with the existing PLC system within a short time frame, reducing the complexity and cost of the system integration process.

Application Areas and Application Cases

• Application Areas: The KOLLMORGEN S72402-NANANA-NA is suitable for various industries, including manufacturing (CNC machining, robotics, automated assembly), packaging, printing, and textile industries. It can be used in scenarios where precise motion control is required, such as material handling, pick-and-place operations, and precision positioning tasks.
• Application Case: In a textile manufacturing plant, the KOLLMORGEN S72402-NANANA-NA was used to control the servo motors of the textile machines. It provided accurate speed control and position control, ensuring that the yarn was wound and unwound precisely. This improved the quality of the textile products and increased the production efficiency of the plant. The fast response and high precision of the servo drive also reduced the occurrence of yarn breakage, saving raw materials and reducing production costs.

Comparison with Similar Products

Selection Suggestions

• Compatibility: When selecting the KOLLMORGEN S72402-NANANA-NA, ensure that it is compatible with the servo motor you plan to use. Check the motor’s specifications and the drive’s compatibility list to make sure they match. Also, consider the compatibility with your existing control system, especially in terms of communication protocols and interface requirements.
• Installation Environment: Take into account the operating temperature, humidity, and other environmental factors of the installation location. The KOLLMORGEN S72402-NANANA-NA has specific operating and storage temperature ranges, and it should be installed in an environment that meets these requirements. If the environment is harsh, additional protective measures may be needed.
• Budget: While the KOLLMORGEN S72402-NANANA-NA offers high performance and reliability, it’s important to consider your budget. Compare the cost of this drive with other similar products, but also factor in the long-term benefits such as reduced maintenance costs and increased production efficiency. Choose a product that provides the best balance between cost and performance for your specific application.

Precautions

• Safety Specifications: Before installation, make sure to turn off all power sources to avoid electrical shock. Follow the installation instructions carefully to ensure proper wiring and grounding. When handling the drive, use anti-static wristbands or other anti-static measures to prevent damage to the electronic components.
• Maintenance Suggestions: Regularly check the connection status of the power cables, communication cables, and motor cables to ensure they are secure and not damaged. Monitor the operating temperature of the drive and ensure it stays within the specified range. Clean the drive regularly to remove dust and debris, which can affect its performance. Periodically check the performance of the drive, such as its control accuracy and response time, and perform any necessary adjustments or calibrations according to the manufacturer’s recommendations.