GE IC695CRU320

Description

Parameters:

• Manufacturer: GE Fanuc
• Product Number: IC695CRU320
• Product Type: PACSystems RX3i Redundant CPU
• CPU Performance: Please refer to Appendix A of PACSystems CPU Reference Manual, GFK-2222W or later versions, for detailed performance data on CRU320¹.
• Battery: Memory retention. For battery selection, installation, and estimated life, refer to PACSystems RX3i and RX7i Battery and Power Pack Manual, GFK-2741¹.
• Program Storage: Up to 64 MB battery-backed memory and 64 MB non-volatile flash memory for user data².
• Power Requirements: +3.3V DC: 1.0A nominal; +5V DC: 1.2A nominal¹.
• Operating Temperature: 0 to 60°C (32°F to 140°F)¹.
• Floating Point: Yes
• Time Clock Accuracy: Maximum drift of 2 seconds per day¹.
• Embedded Communications: RS-232, RS-485¹.
• Supported Serial Protocols: Modbus RTU Slave, SNP, Serial I/O

Specifications:

• Backplane: Dual backplane bus support: RX3i PCI and high-speed serial bus¹.
• PCI Compatibility: System design complies with PCI 2.2 standard².
• Program Blocks: Up to 512 program blocks. Maximum size of one block is 128KB¹.
• Memory: %I and %Q: 32k bits for discrete; %AI and %AQ: Configurable up to 32K words; %W: Configurable maximum available user RAM¹.
• Symbols: Configurable maximum 64MB flash memory².
• Endurance Rating: At least 100,000 write/erase cycles¹.
• Memory Error Checking and Correction (ECC): Single-bit correction and multi-bit detection¹.
• Switching Time: Maximum 1 logic scan, minimum 3.133 ms. Typical benchmark scan time (referring to the impact of data transmission list): 3.66 ms for 1K discrete I/O, 125 analog I/O, and 1K registers¹

Dimensions and Weight:

• Specific dimensions and weight are not provided in the search results.

Series:

• Product Series: PACSystems RX3i

Features:

• Hot Standby Redundancy: Allows users to set up and configure two RX3i CPUs to perform the same functions in a given application, minimizing downtime for time-critical applications².
• Dual Serial Communication Ports: An RS-232 port and an RS-485 port, enabling integration into end-user control algorithms².
• Durable Construction: Made of sturdy plastic with an open housing, not recommended for high humidity, dusty, debris-filled, or water-prone industrial environments².

Application:

• GE Fanuc IC695CRU320 RX3i Central Processor is a solid-state automation computer designed and manufactured by GE Fanuc. It serves as the logical brain for applications implemented through the RX3i PACSystems platform