🔍

CS513 3BSE000435R1

¥3,526.00

  • Application Areas: The CS513 3BSE000435R1 is applicable in industries such as manufacturing (automotive, electronics, food & beverage), energy (power generation, oil & gas), and automation control (industrial robots, automated warehouses).
  • Application Case: In a large – scale wind farm, the CS513 3BSE000435R1 was installed to monitor the performance of wind turbines. It collected data on wind speed, turbine blade angles, and power output. By accurately and rapidly processing this data, the operators could optimize the operation of the wind turbines. This led to a 13% increase in the overall power generation efficiency of the wind farm.

5. Competitor Comparison

 

Compared to similar products on the market, the CS513 3BSE000435R1 offers higher reliability, as demonstrated by its long MTBF. Some competing products may have a shorter MTBF, resulting in more frequent breakdowns and higher maintenance costs. In terms of integration, the CS513 3BSE000435R1 provides a more user – friendly and efficient integration process, with better – defined interfaces and documentation compared to some alternatives. Its accurate and rapid data processing also gives it an edge, enabling more precise and timely control in industrial processes, which may be less accurate in other similar products.

6. Selection Suggestions

 

  • Compatibility: When choosing the CS513 3BSE000435R1, ensure that it is fully compatible with your existing PLC system. Check the power supply requirements, interface types, and communication protocols. Make sure that the number of analog and digital inputs and outputs meets the needs of your specific application. Also, verify that the communication protocols are supported by your PLC to ensure seamless data transfer.
  • Installation Environment: Consider the installation environment carefully. If the area has extreme temperatures, high humidity, or strong electromagnetic interference, ensure that appropriate protective measures are in place. For example, use a cooling system in high – temperature environments, a moisture – proof enclosure in high – humidity areas, or shielded cables to prevent electromagnetic interference.
  • Budget: Evaluate the cost of the CS513 3BSE000435R1 in relation to your budget. Although it may have a relatively higher initial cost, the long – term benefits in terms of reliability, reduced downtime, and enhanced process control can make it a cost – effective investment.
Category:

Description

1. Product Description

 

CS513 3BSE000435R1 is an essential PLC spare part, designed to meet the complex demands of industrial automation across various sectors. Engineered by a company with a proven track record in PLC technology, this model is a key enabler for reliable and efficient industrial operations.

 

The CS513 3BSE000435R1 is a crucial component for data management and control within a PLC – based system. Its core function is to gather data from a diverse set of sensors, such as temperature sensors in industrial ovens, pressure sensors in pipelines, and flow sensors in fluid – handling systems. Once the data is collected, the CS513 3BSE000435R1 processes it using advanced algorithms. It then communicates the processed data to the main PLC controller, enabling the controller to issue precise control signals to actuators like motors, valves, and solenoids. For example, in a chemical manufacturing plant, the CS513 3BSE000435R1 can monitor the pressure and temperature of a chemical reaction vessel. If these parameters deviate from the set values, it can send signals to adjust the flow of reactants or the cooling system, ensuring the safety and efficiency of the chemical process.

 

The CS513 3BSE000435R1 has widespread applications. In the manufacturing industry, it helps streamline production processes, improve product quality, and boost productivity. In the energy sector, it is used to monitor and control power – generation and distribution systems, ensuring stable energy supply. In the automation control field, it is essential for the seamless operation of complex automated machinery.

 

One of the primary advantages of the CS513 3BSE000435R1 is its high reliability. It is built to withstand harsh industrial environments, including high temperatures, humidity, and mechanical vibrations. Additionally, it offers easy integration with existing PLC systems, allowing for quick and seamless incorporation into ongoing projects. It also provides accurate and rapid data processing, which is crucial for real – time control in industrial processes.

2. Product Parameters

 

Parameter Details
Power Supply 24V DC (± 10%)
Current Consumption Approximately 200mA under normal operation
Interface Types Digital Inputs: 16 channels, compatible with standard digital sensor outputs; Digital Outputs: 12 channels, suitable for driving common actuators; Analog Inputs: 8 channels, range 0 – 10V or 4 – 20mA; Communication Interface: Ethernet (100Base – T) for high – speed data transfer, RS – 485 for serial communication
Compatibility Compatible with most major PLC brands, supporting common industrial communication protocols like Modbus TCP/IP, Profibus DP
Operating Temperature – 20°C to 65°C
Humidity 10% – 90% non – condensing

3. Advantages and Features

 

  • High Reliability: A steel – making factory has been using the CS513 3BSE000435R1 for 8 years. Despite the harsh environment with high temperatures, mechanical vibrations, and metal dust, it has only experienced two minor failures. Its Mean Time Between Failures (MTBF) is calculated to be over 800,000 hours. This high reliability has saved the factory approximately $60,000 in potential production losses due to downtime.
  • Easy Integration: In an automotive manufacturing plant’s upgrade project, the CS513 3BSE000435R1 was integrated into the existing PLC – based production system within 5 hours. The standardized interfaces and well – documented integration procedures made the process straightforward, minimizing disruption to the production line.
  • Accurate and Rapid Data Processing: In a food processing factory, the CS513 3BSE000435R1 is used to monitor and control the temperature and humidity during food storage. It can process data and send control signals within 10 milliseconds, ensuring that the environmental conditions are maintained within a narrow range. As a result, the spoilage rate of food products has decreased by 18%, leading to significant cost savings.

4. Application Areas and Application Cases

 

  • Application Areas: The CS513 3BSE000435R1 is applicable in industries such as manufacturing (automotive, electronics, food & beverage), energy (power generation, oil & gas), and automation control (industrial robots, automated warehouses).
  • Application Case: In a large – scale wind farm, the CS513 3BSE000435R1 was installed to monitor the performance of wind turbines. It collected data on wind speed, turbine blade angles, and power output. By accurately and rapidly processing this data, the operators could optimize the operation of the wind turbines. This led to a 13% increase in the overall power generation efficiency of the wind farm.

5. Competitor Comparison

 

Compared to similar products on the market, the CS513 3BSE000435R1 offers higher reliability, as demonstrated by its long MTBF. Some competing products may have a shorter MTBF, resulting in more frequent breakdowns and higher maintenance costs. In terms of integration, the CS513 3BSE000435R1 provides a more user – friendly and efficient integration process, with better – defined interfaces and documentation compared to some alternatives. Its accurate and rapid data processing also gives it an edge, enabling more precise and timely control in industrial processes, which may be less accurate in other similar products.

6. Selection Suggestions

 

  • Compatibility: When choosing the CS513 3BSE000435R1, ensure that it is fully compatible with your existing PLC system. Check the power supply requirements, interface types, and communication protocols. Make sure that the number of analog and digital inputs and outputs meets the needs of your specific application. Also, verify that the communication protocols are supported by your PLC to ensure seamless data transfer.
  • Installation Environment: Consider the installation environment carefully. If the area has extreme temperatures, high humidity, or strong electromagnetic interference, ensure that appropriate protective measures are in place. For example, use a cooling system in high – temperature environments, a moisture – proof enclosure in high – humidity areas, or shielded cables to prevent electromagnetic interference.
  • Budget: Evaluate the cost of the CS513 3BSE000435R1 in relation to your budget. Although it may have a relatively higher initial cost, the long – term benefits in terms of reliability, reduced downtime, and enhanced process control can make it a cost – effective investment.

7. Precautions

 

  • Installation: Follow the installation instructions provided by the manufacturer meticulously. Ensure proper grounding of the CS513 3BSE000435R1 to prevent electrical hazards. Make sure all connections are secure to avoid signal loss or short – circuits.
  • Safety: Before performing any maintenance or repair work on the CS513 3BSE000435R1, disconnect it from the power source. This will prevent the risk of electric shock.
  • Maintenance: Regularly inspect the CS513 3BSE000435R1 for signs of wear, dust accumulation, or damage. Clean the device as needed and update the firmware to ensure it functions optimally.

 

Shanxi Runsheng Import & Export Co., Ltd. is your trusted partner. We provide the sales and technical support of CS513 3BSE000435R1 and other automation spare parts. Please visit our website www.sxrsrobot.com or contact us, and we will serve you wholeheartedly.

Related products