BENTLY 3500/25 125792-01

Description

argument

Voltage: 24V
Current: 100-400A (This current range may refer to the power input or output current range supported by the device, which needs to be determined according to the actual use)
Power consumption: Typical power consumption is 3.2 watts
Signal range: Each keyer module accepts two sensor signals, with input signals ranging from + 0.8V to -21.0V (non-isolated I/O modules) or +5V to -11V (isolated I/O modules)
Signal conditioning: The processed signal has an accuracy of ±1 cpm at 0.017 to 60 Hz, ±8 cpm at 61 to 150 Hz, and ±1% at 151 to 20 kHz

specification

Type: Module 125792-01 in the BENTLY 3500/25 series, which may be a PLC/DCS card module for vibration monitoring or motion control
Function: As an enhanced keying module, it provides extended keying signal processing capabilities while remaining compatible with existing keying modules
Size and weight
Size: The exact size is not given directly, but depending on the conventional design of BENTLY products, the module may be a compact card-level or box-level unit
Weight: Approximately 2KG

trait

Dual channel module: A half-height dual channel design for providing key trust numbers to the monitor module in the 3500 rack
Signal conversion: Receive the input signal from the proximity detector or magnetic pickup, and convert the signal into a digital key phase signal
Programming simplification: Using a 32-bit RISC processor, programming is simplified with intuitive two-letter commands and a full suite of software tools for servo tuning and analysis
Multiple motion modes: including point-to-point positioning, position tracking, jogging, contouring, electronic gear and ecam
Network interface: A built-in network interface that supports TCP/IP, UDP, and Modbus TCP master protocols for communication with I/O devices
Alarm and diagnostic function: can monitor the status of the input signal and trigger an alarm when a preset condition is reached