BENTLY 3500/25 125792-01

Description

argument
Voltage: 24V
Current: 100-400A (This current range may refer to the power input or output current range supported by the device, which needs to be determined according to the actual use)
Power consumption: Typical power consumption is 3.2 watts
Signal range: Each keyer module accepts two sensor signals, with input signals ranging from + 0.8V to -21.0V (non-isolated I/O modules) or +5V to -11V (isolated I/O modules)
Signal conditioning: The processed signal has an accuracy of ±1 cpm at 0.017 to 60 Hz, ±8 cpm at 61 to 150 Hz, and ±1% at 151 to 20 kHz
specification
Type: Module 125792-01 in the BENTLY 3500/25 series, which may be a PLC/DCS card module for vibration monitoring or motion control
Function: As an enhanced keying module, it provides extended keying signal processing capabilities while remaining compatible with existing keying modules
Size and weight
Size: The exact size is not given directly, but depending on the conventional design of BENTLY products, the module may be a compact card-level or box-level unit
Weight: Approximately 2KG
series
BENTLY 3500/25 series

effect
The BENTLY 3500/25 125792-01 module is primarily designed to provide accurate timing measurements, allowing 3500 monitor modules and external diagnostic equipment to measure the rotational speed and vector parameters of the shaft, such as 1X amplitude and phase. It plays an important role in industrial automation and mechanical protection systems by receiving and processing signals from sensors to achieve real-time monitoring and protection of mechanical equipment.

trait
Dual channel module: A half-height dual channel design for providing key trust numbers to the monitor module in the 3500 rack
Signal conversion: Receive the input signal from the proximity detector or magnetic pickup, and convert the signal into a digital key phase signal
Programming simplification: Using a 32-bit RISC processor, programming is simplified with intuitive two-letter commands and a full suite of software tools for servo tuning and analysis
Multiple motion modes: including point-to-point positioning, position tracking, jogging, contouring, electronic gear and ecam
Network interface: A built-in network interface that supports TCP/IP, UDP, and Modbus TCP master protocols for communication with I/O devices
Alarm and diagnostic function: can monitor the status of the input signal and trigger an alarm when a preset condition is reached