🔍

3500/42M 176449-02

¥6,254.00

argument
Input signals: Multiple input types are supported, including eddy current sensor input, speed, acceleration, and dual probe (speed and displacement) input.
Resolution: up to 24 bits, provides low noise levels.
Frequency response: Small operating frequency to 1 kHz (60,000 cpm).
Sensitivity: 20mV/mm/s (500 mV/in/s) ±5% at 100 Hz (6,000 cpm).
Power consumption: 7.7 watts (3500/42M for another configuration, may vary).
Shaft power supply: -24VDC.
Inverter power supply: -24VDC.
specification
Product type: Proximitor Seismic monitoring I/O module.
Measurement range: Support a variety of measurement ranges, users can choose the appropriate measurement range according to actual needs.
Multi-channel monitoring: Configurable 4-channel monitor module that can monitor multiple parameters simultaneously.
High precision measurement: Excellent linearity and low drift ensure accurate measurement results over a wide dynamic range.

Category:

Description

series
The 3500/42M is a model in Bently Nevada’s 3500 series, which focuses on vibration and displacement monitoring.
trait
Multi-channel monitoring: Improves the efficiency of test and measurement.
Diverse input types: able to receive a variety of input signals and their associated signal conditioning.
Differential signal processing: Extract the housing vibration signal from the relative vibration of the shaft.
High precision measurement: provides up to 24-bit resolution and low noise levels.
Flexible input range: Supports a variety of adjustable input ranges to adapt to the amplitude requirements of different signal sources.
Built-in calibration function: Ensure the accuracy and reliability of each channel during measurement.
High-speed data transmission: PXIe bus interface is adopted to achieve high-speed data transmission.
effect
Vibration monitoring: Designed for radial vibration, axial displacement, eccentricity, REBAM and differential expansion measurements.
Fault prevention: Through real-time monitoring and data analysis, users can detect and adjust anomalies in time to prevent device faults.
Improve equipment performance: Provide accurate vibration and displacement data to help optimize equipment operating parameters and improve equipment performance and reliability.

argument
Input signals: Multiple input types are supported, including eddy current sensor input, speed, acceleration, and dual probe (speed and displacement) input.
Resolution: up to 24 bits, provides low noise levels.
Frequency response: Small operating frequency to 1 kHz (60,000 cpm).
Sensitivity: 20mV/mm/s (500 mV/in/s) ±5% at 100 Hz (6,000 cpm).
Power consumption: 7.7 watts (3500/42M for another configuration, may vary).
Shaft power supply: -24VDC.
Inverter power supply: -24VDC.
specification
Product type: Proximitor Seismic monitoring I/O module.
Measurement range: Support a variety of measurement ranges, users can choose the appropriate measurement range according to actual needs.
Multi-channel monitoring: Configurable 4-channel monitor module that can monitor multiple parameters simultaneously.
High precision measurement: Excellent linearity and low drift ensure accurate measurement results over a wide dynamic range.
Size and weight
Size:
9.50 x 4.50 x 1.00 inches (from [1])
170mm x 105mm x 32mm (from [3])
Weight:
0.85 LBS (source [1])
Approx. 120g (source [3])
1.3KG (as displacement monitor, derived from [5])

Related products