3500/22M

Description

Parameters and specifications
Input signal: Support -10 Vdc to +10 Vdc input signal.
Power consumption: 7.7 Watts.
Shaft power supply and sensor power supply: both -24 Vdc.
Operating temperature: Depending on the search results, the operating temperature may vary. One says it’s 25 degrees Celsius, another says it’s -20°C to +50°C, and still another says it’s 0°C to 55°C. The storage temperature range may be wider, such as -40°C to +70°C.
Resolution: In some specific applications, the resolution of temperature and humidity may be involved, such as temperature 0.1 ° C, humidity 0.1%RH.
Working current: ≤35mA (under 12V DC power supply condition).
Voltage range: The operating voltage may be 10V to 30V DC, or the input voltage range of 12-48VDC as mentioned in [3].
Size and weight
Size: According to the search results, there are two different size specifications. One is 9.50 x 4.50 x 1.00 inches (or similar) and the other is 263525mm. Note that these two sizes may work for different product versions or application scenarios.
Weight: There are also different accounts. One is 0.85 pounds, another is about 120 grams, and the other is 1.24kg.
trait
Data collection function: The ability to continuously collect steady state and transient dynamic (waveform) data and transfer the data to the host software over the Ethernet link.
Static and dynamic data logging: In addition to traditional static data collection capabilities, an optional channel-enabled disk can be used to record dynamic, high-resolution transient data.
Mode switching: Used to switch 3500 racks between “RUN” and “Programming” modes, RUN mode prevents configuration modifications while allowing the racks to operate normally.
Communication processing capabilities: 3500 racks contain the communication processing capabilities of TDI, but TDI is not a critical component of the monitoring system.
Alarm data collection: Waveform data and static values are collected at different intervals before and after the alarm.