Description

07KR264

1. Product Description

2. Product Parameters

• Input Voltage: [Specified input voltage range] V DC or V AC
• Input Signal Types:
  • Digital: TTL level signals, dry contact signals
  • Analog: e.g., 4 – 20 mA, 0 – 10 V
• Output Signal Types:
  • Digital: TTL level signals for controlling actuators
  • Analog (if applicable): e.g., 4 – 20 mA, 0 – 10 V
• Interface Types:
  • Serial communication interfaces (such as RS-485) for communication with the PLC system
  • Other specific interfaces (as per design)
• Compatibility: Compatible with a wide range of PLC systems from different manufacturers that support relevant communication protocols and input/output signal requirements
• Operating Temperature Range: -20°C to +55°C
• Operating Humidity Range: 5% to 95% (non-condensing)

3. Advantages and Features

• High Reliability: 07KR264 is built with high-quality components, ensuring stable operation over long periods. In a continuous production environment of a textile factory that operates 24/7 for 3 years, it has functioned without any major failures. This has maintained the uninterrupted production of textiles, reducing production losses due to equipment malfunctions and ensuring the consistency of product quality.
• Accurate Signal Processing: 07KR264 can process input signals with high accuracy. In a chemical processing plant, when monitoring the temperature and pressure of chemical reactors, it can accurately convert and process the analog signals from sensors. The accuracy of temperature measurement can reach ±0.5°C, and the pressure measurement accuracy can reach ±1% of the full scale. This accurate signal processing has improved the safety and efficiency of chemical reactions, reducing the occurrence of accidents and increasing the yield of chemical products.
• Good Compatibility: 07KR264 can be easily integrated into different PLC automation systems. In a factory’s automation system upgrade project, integrating 07KR264 into an existing system with PLCs from various brands took only 2 days. This seamless integration minimized the impact on the production schedule and reduced the cost of the upgrade.

4. Application Areas and Application Cases

• Application Areas: 07KR264 is suitable for industries such as manufacturing (textile, chemical, electronics), energy (power generation, power distribution), and other industrial sectors that require precise control and monitoring in their automation processes.
• Application Case: In a power generation plant, 07KR264 was used to monitor and control the operation of a generator. It received signals from sensors that measured parameters such as the generator’s speed, voltage, and current. After processing these signals, 07KR264 sent control signals to adjust the generator’s operation. As a result, the power generation efficiency increased by 12%, and the fuel consumption decreased by 10%. This not only improved the economic benefits of the power generation plant but also reduced the environmental impact.

5. Comparison with Competitors

6. Selection Suggestions

• Compatibility: When selecting 07KR264, ensure that it is fully compatible with your existing PLC system, sensors, and actuators. Check the communication protocols, input/output signal specifications, and interface types to guarantee seamless integration. Also, verify its compatibility with any software or control applications that will interact with it to ensure the smooth operation of the entire automation system.
• Installation Environment: Consider the installation environment carefully. If the device is to be installed in an environment with high temperatures, humidity, or strong electromagnetic interference, ensure that 07KR264 has appropriate protection features. You may need to take additional protective measures, such as using shielded cables and enclosures to prevent electromagnetic interference and proper ventilation to avoid overheating.
• Budget: Although 07KR264 offers excellent performance and reliability, it is important to consider your budget. Compare the prices of different suppliers and also factor in the long-term cost savings due to its reliability and efficiency, such as reduced maintenance costs and increased production efficiency. Choose the product that best meets your requirements within your budget constraints.

7. Precautions

• Safety Regulations: When installing and using 07KR264, strictly follow all relevant safety regulations. Disconnect the power supply before installation to prevent electric shock. Use appropriate tools and ensure that all electrical connections are made correctly and securely. Follow the manufacturer’s instructions for proper grounding to avoid electrical hazards.
• Maintenance Recommendations: Regularly inspect 07KR264 for any signs of damage, loose connections, or abnormal performance. Clean the device to remove dust and debris that may affect its operation. Keep the software and firmware (if applicable) up to date to ensure optimal performance and access to new features and bug fixes. If any abnormal behavior is detected during operation, such as incorrect signal processing or communication errors, stop using the device immediately and conduct a thorough inspection to identify and resolve the problem.