Grid view List view

Showing 241–252 of 347 results

NI CFP-1808

¥6,104.00

Parameters and Specifications:

  • Voltage: 220V (some sources mention 24V as well)12.
  • Current: Range may be 100-400A, but this may vary depending on the application15.
  • Output Frequency: In some applications, the output frequency could be 50Hz or 350kHz125.
  • Weight: 2KG (as mentioned in one source)1.

Dimensions:

  • Specific dimensions are not provided in the search results.

NI SBRIO-9607

¥6,032.00

Parameters and Specifications:

  • Processor: Xilinx Zynq-7020 SoC123
  • Memory: 512 MB DDR3 SDRAM (DRAM), 1512 MB Nonvolatile Memory13
  • Storage: 2 GB SLC NAND Flash2
  • Processor Speed: 667 MHz13
  • Operating System: NI Linux Real-Time (32 bit)3
  • Communication Interfaces: 2 Gigabit Ethernet ports, 1 USB port, 1 RS232 serial port2
  • I/O Interfaces: 40 FPGA general-purpose I/O pins, 2 FPGA high-speed serial interfaces, 4 FPGA differential ADC interfaces, 4 FPGA differential DAC interfaces2

Dimensions and Weight:

  • Size: 95 x 95 mm2
  • Weight: Not specifically mentioned in the search results.

NI SCXI-1104C

¥6,203.00
Parameters and specifications:
Number of differential input channels: 16
Maximum sampling rate: 100 kS/s
Resolution: 24 bits
Input voltage range: ±10 V
Input impedance: 1 MΩ || 5 pF
Signal type: Supports many different types of analog input signals such as voltage, current, resistance, etc., and may also include digital input channels
Measurement accuracy: A measurement of high accuracy, usually expressed in the form of digits or percentages
Sampling rate: Has an adjustable sampling rate, allowing users to select different sampling rates according to application requirements

NI PCI-8517

¥5,263.00

Parameters:

  • Sampling Rate: Up to 2 MS/s (Megasamples per second)
  • Resolution: 16-bit
  • Number of Channels: 16 Differential/32 Single-Ended

Specifications:

  • Input Voltage Range: ±10 V, ±5 V, ±2 V, ±1 V, 0-10 V (selectable)
  • Input Impedance: 1 MΩ || 15 pF (typical)
  • Common-Mode Voltage Range: ±16 V
  • Maximum Throughput: 32 MB/s sustained to host memory

NI PXIE-6368

¥6,035.00
Parameters and specifications:
Analog input channels: 16
Resolution: 24 bits
Maximum sampling rate: 250 kS/s per channel
Digital I/O lines: 48
Analog input range: ±10V
Input impedance: 10 MΩ || 10pf
Digital I/O voltage level: TTL/CMOS compatible
Maximum input voltage: ±20V
Maximum input current: ±10ma

NI PCI-7813R

¥5,622.00

Parameters and Specifications:

  • Channel Count: 8 (Analog input channels: 8 differential or 16 single-ended)1.
  • Resolution: 24 bits1.
  • Maximum Sample Rate: 500 ks/s per channel1.
  • Input Voltage Range: ±10V1.
  • Output Voltage Range: ±10V1.
  • Digital I/O Lines: 241.
  • Counter/Timers: 21.
  • Bus Interface: PCI1.

NI PXI-4472B

¥5,629.00

Parameters and Specifications:

  • Analog Inputs: 8 differential or 16 single-ended1.
  • Analog Outputs: 41.
  • Digital I/O: 48 lines1.
  • Update Rate: Up to 1.25 MS/s4.
  • Resolution: 16-bit1.
  • Voltage Range: ±10v, ±1v, ±100mv1.
  • Operating Temperature: -20°C to 55°C1.
  • Power Consumption: Maximum 14W2.
  • Size: 3U PXI module1.
  • Weight: Not specified.

NI PXIE-6556

¥6,032.00

Parameters and Specifications:

  • Number of Channels: 24 high-speed dynamic data channels123
  • Control Channels: 4 with Pin Parameter Measurement Unit (PPMU) functionality23
  • Voltage Range: -2.0 to 7.0 V programmable per pin123
  • Current Range: Up to 32 mA source or sink per channel23
  • Maximum Clock Rate: 200 MHz14
  • Voltage Levels: -2 V to 7 V or -1 V to 7V14
  • Memory per Channel: 64 MB (part number 781949-02) or 8 MB (part number 781949-01)14
  • Maximum Data Transfer Rate: 200 Mbps14

NI PXI-7344

¥5,690.00

Parameters and Specifications

  • Type: Digital Multimeter (DMM)
  • Measurement Channels: 4 Simultaneous Channels
  • Measurement Ranges:
    • DC Voltage: 100 mV to 1000 V
    • AC Voltage: 100 mV to 750 V
    • DC Current: 100 µA to 3 A
    • AC Current: 100 µA to 3 A
    • Resistance: 100 Ω to 100 MΩ
    • Frequency: 10 Hz to 1 MHz
    • Period: 1 µs to 10 s
    • Diode Test: Yes
    • Continuity Check: Yes
  • Accuracy: Typically 0.004% + 2 counts
  • Resolution: Up to 7½ digits
  • Throughput: Up to 100,000 readings/s (per channel)

NI PXI-7344

¥5,123.00

Parameters

  • Model: NI PXI-7344
  • Voltage: 24V
  • Current Range: 100-400A
  • Number of Axes: 4-axis
  • Interface: PCIe, PXIe

Specifications

  • Brand: National Instruments (NI)
  • Series: PXI Series
  • Type: High-Performance 4-Axis Servo Motor Controller

Dimensions and Weight

  • Dimensions: Not Specified
  • Weight: 2KG

NI PXI-7344

¥6,235.00

Parameters

  • Model: NI PXI-7344
  • Voltage: 24V1
  • Current Range: 100-400A1
  • Number of Axes: 4-axis123
  • Interface: PCIe, PXIe23

Specifications

  • Brand: National Instruments (NI)
  • Series: PXI Series
  • Type: High-Performance Servo Motor Controller123

NI USB-6343

¥6,200.00

Here is a brief overview of the parameters, specifications, dimensions, weight, series, features, and role of the NI USB-6343 in English:

Parameters and Specifications:

  • Type: Multifunction DAQ (Data Acquisition) Module
  • Number of Channels:
    • 32 Analog Input Channels (Differential/Single-Ended)
    • 4 Analog Output Channels
    • 48 Digital I/O Lines
    • 2 32-bit Counter/Timers
  • Sampling Rate: Up to 2 MS/s per channel (single-ended)
  • Resolution: 16-bit
  • Input Voltage Range: ±10 V, ±5 V, ±2 V, ±1 V, 0 to 10 V (configurable)
  • Output Voltage Range: ±10 V (configurable)
  • Compatibility: Compatible with NI LabVIEW, MATLAB, and other NI software