Grid view List view

Showing 193–204 of 347 results

USB-6341

¥6,326.00

argument
Analog input (AI) : 16-channel, 16-bit resolution, maximum sampling rate of 500 kS/s, input range ±10 V.
Analog output (AO) : 2-channel, 16-bit resolution, maximum sampling rate of 900 kS/s, output range ±10 V.
Digital I/O (DIO) : 24, of which 8 are 1 MHz hardware timing lines.
Counter/timer: 4-channel 32-bit for PWM, encoder, frequency, event counting, etc.
specification
Bus interface: USB.
Dedicated bandwidth: up to 250 MB/s.
Timing and synchronization technology: NI-STC3 provides advanced timing capabilities, including separate analog and digital timing engines, retriggable measurement tasks, and more.
Software compatibility: Compatible with LabVIEW 8.2, LabWindows™/CVI 7.x, Measurement Studio 7.x, LabVIEW SignalExpress 1.x and later versions of NI applications.

PXI-7340

¥4,251.00

argument
Number of axes: 4 axes
Position accuracy: 1μm
Speed: 10 m/s
Acceleration: 100 m/s²
Slot: PXIe
Operating voltage: 24Vdc/120Vac (according to merchant information)
Output frequency: 50-60 (according to merchant information)
specification
Compatibility: LabVIEW, LabWindows/CVI, MATLAB, C/C++
System environment: room temperature (according to merchant information)
System capability: Intelligent, operating system PLC system (according to merchant information)
Size and weight
Dimensions: 100 mm x 160 mm x 21 mm
Weight: 310 grams

PXIE-8840QC

¥6,205.00

Product Parameters

  • Processor: Quad-core Intel Core i7
  • Memory: Up to 16 GB DDR3
  • Storage: Up to 1 TB SATA hard drive or 512 GB solid-state drive
  • Ethernet: 2 x Gigabit Ethernet
  • USB: 4 x USB 3.0, 2 x USB 2.0
  • Display: 1 x VGA, 1 x DisplayPort

SCXI-1163R

¥4,521.00
Features:
Switching high voltage loads: The SCXI-1163R can be used to switch high voltage loads.
Programming method: Serial programming via SCXIbus can be integrated into existing SCXI systems without additional equipment or wiring.
Parallel mode: Run in parallel mode when connected directly to a plug-in digital I/O device.
Stability: The product is considered to be stable.

SCXI-1163R

¥4,151.00
Size and weight:
Size: 23173.5 (unit not specified).
Weight: About 1.33kg.
Series:
The SCXI-1163R belongs to the SCXI family of NI (National Instruments).
Features:
High isolation: Optical isolation technology is used to provide high isolation.
Programmability: Serial programming via SCXIbus can be integrated into existing SCXI systems.
Run mode: Runs in parallel mode when connected directly to a plug-in digital I/O device.
Stability: The product features are marked as stable.

PXI-7344

¥5,124.00
Parameters and specifications:
Model: PXI-7344
Brand: NI (National Instruments)
Number of axes: 4 axes
Position accuracy: up to 1 micron
Speed accuracy: up to 0.01%
Maximum speed: up to 60 rpm per shaft
Rated current: 3 A/ shaft
Number of channels: 4 channels analog output (when used as analog output module)
Output range: ±10 V (unipolar) or 0 to 20 V (bipolar)
Resolution: 16 bits
Maximum update rate: up to 250 kS/s per channel

CFP-AIO-600

¥6,235.00
Parameters and specifications:
Model: CFP-AIO-600.
Voltage: 24V.
Current: 100-400A.
Number of channels: 4 analog inputs and 4 analog outputs.
Maximum calculated length: 15,000m (16,400 yd) load of the AF100.
Compliance standards: NIST (National Institute of Standards and Technology) traceable calibration standards.

SCXI-1162HV

¥4,157.00
Parameters and specifications:
Main function: Detect a variety of AC or DC signals, from digital logic level signals to 240VAC/VDC signals.
Optical isolation function: avoid ground loop problems and protect the host computer from excessive voltage damage.
Serial programming: Serial programming on DAQ devices via the SCXI bus is easy to integrate into existing SCXI systems.
Maximum transfer rate: 460.8kb /s.
Operating voltage: ±10 V.
Storage: 512 MB.

NI-9505

¥5,214.00
Features:
Flexibility: The NI-9505 offers flexible configuration and programming options that allow users to customize I/O.
High accuracy: A high precision A/D converter enables high precision analog measurement (although this applies mainly to the NI-9505 as an analog input module, the motor drive module also benefits from its precise control algorithm).
Reliability: High quality electronic components and reliable manufacturing processes ensure stable operation under various environmental conditions.
Easy integration: Seamless integration with NI’s LabVIEW FPGA module and SoftMotion technology simplifies the development process.
Multiple control modes: Support open loop control, closed loop control, step control and other control modes.

SCXI-1162HV

¥6,235.00
Parameters and specifications:
Main function: Detect a variety of AC or DC signals, from digital logic level signals to 240VAC/VDC signals.
Technical specifications:
Applicable to SCXI system.
It has optical isolation function to avoid ground loop problems and protect the host computer from excessive voltage damage.
Serial programming can be done on DAQ devices via the SCXI bus, making it easy to integrate into existing SCXI systems.
Maximum transfer rate: 460.8kb /s.
Operating voltage: ±10 V.
Storage: 512 MB.

CFP-1804

¥4,258.00
Parameters and specifications:
Interfaces and connections: The CFP-1804’s interfaces and universal connections can be configured as input or output modules.
Communication: The CFP-1804 Ethernet/serial backplane can connect Compact FieldPoint I/O modules to high-speed Ethernet networks or RS232 serial ports. It also supports a wide range of third-party protocols such as Modbus TCP, Optomux, Modbus ASCII, Modbus RTU, and OPC, as well as NI event-driven Ethernet/serial protocols.
Configuration: IP address assignment and module configuration can be done using the NI Measurement & Automation Explorer (MAX) and Ni-FieldPoint drivers.

SCXI-1349

¥6,205.00
Parameters:
Analog input: 32 channels.
Analog output: 4 channels.
Digital I/O: 8 channels.
Maximum sampling rate: 1ms /s.
Resolution: 16 bits.
Communication interface: USB.
Specifications:
Power requirements: 5v DC, 500ma.
Operating temperature: 0 ~ 40℃.