Grid view List view

Showing 265–276 of 419 results

MVME5100

¥4,102.00

Parameters and Specifications‌:

–‌Processors‌: Supports MPC7410, MPC750, or MPC755 microprocessors with 32KB L1 cache12
–‌Front-Side Bus‌: 100 MHz12
–‌Memory‌: Supports up to 1 GB SDRAM, with an initial 128 MB2
–‌Storage‌: Typically equipped with a 2 GB IDE hard disk or solid-state drive2
–‌Bandwidth‌: Up to 582 MB/s memory read bandwidth and 640 MB/s burst write bandwidth12
‌Dimensions and Weight‌:

–‌Dimensions‌: 233 mm x 160 mm x 40 mm3
–‌Weight‌: 2 kg3 (another source mentions 1.36 kg for a similar product, so actual weight may vary)4
‌Series‌:

  • Part of Motorola’s MVME series, specifically the PowerPlus II VME architecture flagship line5

MVME2100

¥6,523.00

‌Parameters and Specifications‌:

–‌Processor‌: Motorola PowerPC MPC8240 (32-bit) or PowerPC 603e12
–‌Memory‌: 256 MB to 1 GB SDRAM2
–‌Storage‌: 256 MB to 2 GB Flash memory2
–‌Communication Interfaces‌: VMEbus, RS-232, RS-485, Ethernet2
–‌Expansion Interfaces‌: PCI, PCI-X2
‌Dimensions and Weight‌:

–‌Dimensions‌: 233mm x 167mm x 30mm2
–‌Weight‌: Approximately 500g2
‌Series‌:

  • Part of Motorola’s MVME series of VMEbus industrial computer modules

MVME3100

¥4,256.00

‌Parameters & Specifications‌:
–‌Processor‌: System-on-Chip (SoC) Freescale MPC8540 with PowerPC® e500 core12
–‌Memory‌: Up to 512MB DDR333 ECC RAM12
–‌Ethernet Ports‌: Two Gigabit Ethernet ports and one 10/100BaseTX port12
–‌Interfaces‌: USB 2.0, Serial ATA, RS232 (multiple ports)12
–‌VMEbus Protocol‌: 2eSST for high bandwidth operation up to 320MB/s12
–‌Supported Operating Systems‌: VxWorks, LynxOS, and Linux12
‌Dimensions & Weight‌:
–‌Dimensions‌: Approximately 26cm x 33cm x 37cm
–‌Weight‌: Approximately 2.3kg
‌Series‌:

  • Part of Emerson Network Power’s MVME series of VMEbus-based SBCs

MVME5500-0161

¥6,235.00

‌Parameters & Specifications‌:

–‌Model‌: MVME5500-0161
–‌Processor‌: Based on the DSP5600 digital signal processor family, or MPC1 processor with a running frequency of up to 7457 GHz12.
–‌Memory‌: 512 MB ECC SDRAM and 128 MB Flash3.
–‌Operating Systems‌: Supports VxWorks and Linux3.
‌Dimensions & Weight‌:

–‌Size‌: 233.4 mm x 146.1 mm (as per one source)3, or 170mm x 105mm x 32mm (another specification)4. The exact dimensions may vary depending on the mounting options or accessories.
–‌Weight‌: 0.7 kg3, or approximately 120g (a lighter weight specified in another context)4. The heavier weight likely includes the full enclosure and accessories.

MVME2434

¥4,256.00

‌Parameters & Specifications‌:

–‌Processor‌: Equipped with MC68LC040 or optional MC68040 microprocessor, the latter featuring a floating-point coprocessor1.
–‌Memory‌: 1MB, 4MB, or 8MB of parity-protected DRAM, and 512KB of static RAM (SRAM) with battery backup1.
–‌System Controller‌: VMEbus system controller for seamless integration with VMEbus systems1.
–‌I/O Interfaces‌: RS-232 serial ports and potentially other interfaces depending on the manufacturer and configuration2.
‌Dimensions & Weight‌:

–‌Size‌: Typically measures approximately 170mm x 105mm x 32mm,
–‌Weight‌: Weighs around 120g,

MVME162-213

¥3,025.00

1.‌Parameters‌:
–‌Model‌: MVME162-213
–‌Processor‌: MC68040, 25 MHz or 33 MHz options12
–‌Memory‌: 2 MB to 32 MB RAM, expandable up to 64 MB12
–‌Storage‌: IDE hard disk or flash memory1

2.‌Specifications‌:
–‌I/O Interfaces‌: 2 RS-232 serial ports, 1 SCSI interface, 1 parallel port, 1 Ethernet interface1
–‌Power‌: 5V DC, 10W power consumption1
–‌Operating Temperature‌: -40°C to +85°C1

3.‌Dimensions & Weight‌:
–‌Dimensions‌: 146 mm x 100 mm x 30 mm1
–‌Weight‌: 500 grams

VME162PA-344SE-2G

¥4,102.00

Outer diameter: Suitable for various types of three-phase hybrid stepper motors with outer diameter of 86-130mm
Power requirements: Although this parameter is not explicitly stated in the documentation that directly refers to the VME162PA-344SE-2G, typically such devices will require a stable power supply.
specification
Type: Equal Angle constant torque subdivision driver
Internal circuit: The circuit similar to the servo control principle makes the motor run smoothly at low speed, almost no vibration and noise, and the torque of the motor is much higher than that of the two-phase and five-phase hybrid stepper motor at high speed
Volume: 200x156x90(mm3)
Net weight: 1.6kg
Phase memory function: The driver automatically remembers after the input pulse stops for more than 5 seconds
Size and weight
Size: 200x156x90(mm3)
Weight: 1.6kg

MVME55006E-0163R

¥4,250.00
Parameters and specifications
Processor:
Based on the PowerPC architecture, one source says it uses a Freescale MPC7477 PowerPC processor, but another source says it uses a PowerPC 750 processor. Either way, it operates at 1 GHz.
Memory: Up to 2 GB of DDR2 memory, but there are also data showing 1 GB of DDR2 SDRAM.
Storage space: Includes 256 MB Flash and 16 GB SATA hard disk.
I/O interface:
4 Gigabit Ethernet ports.
2 RS-232 ports and possible RS485 communication.
1 USB 2.0 port.
One PCI-X slot.

MVME5100

¥6,235.00
Cache: Has 32KB L1 cache and can be equipped with secondary back-end cache up to 2MB.
Front-end bus speed: 100 MHz.
Memory: 128 MB SDRAM is supported, and memory can be increased with memory sandwich cards up to 1 GB.
Storage: Usually comes with a 2 GB IDE hard drive or solid state drive.
I/O interface: Provides a variety of interfaces, including two RS-232C serial ports, 10/100BaseTX Ethernet interface.
Expansion capability: It has 1 PCI slot and 1 CompactFlash slot, and supports rich peripheral expansion.
Network: Supports dual 10BaseT/100BaseTX Ethernet interfaces, providing high-speed network communication capabilities.
Operating temperature: The commercial version has an operating temperature range of 0° to 55°C, while the extended temperature version has an operating temperature range of -20° to 71°C.
Size and weight
Dimensions: 233 mm x 160 mm x 40 mm.
Weight: 1.36 kg

MVME162-213

¥6,542.00
I/O interface:
Two RS-232 serial ports.
One SCSI interface.
1 parallel port (may also include other serial communication ports and industrial packaging ports depending on other information).
1 Ethernet interface; LAN ethernet transceiver interface (DMA) is optional.
Four 32-pin JEDEC sockets (Model MVME162-2xx/3xx).
Power supply voltage: 5V DC.
Power consumption: 10W.
Operating temperature range: -40°C to +85°C.
Size and weight
Size: 146 mm x 100 mm x 30 mm.
Weight: 500g; However, there is also information that it weighs 2.6kg

MVME55006E-0163R

¥4,265.00
Interface:
Supports a variety of I/O interfaces, such as RS232, RS485, CAN bus communication, as well as Gigabit Ethernet ports, USB 2.0 ports and so on.
The specific number of interfaces may include four Gigabit Ethernet ports, two RS-232 ports, one USB 2.0 port, and one PCI-X slot.
Size and weight
Size:
One version is 233 x 175 x 41 mm.
Another way to say it is 170mm x 105mm x 32mm

MVME2400

¥4,685.00
Parameters and specifications
Processor: The MVME2400 uses MOTOROLA’s low-power, high-performance PowerPC 750 microprocessor.
Cache: Has 32KB/32KB level 1 cache and 1MB back level 2 cache.
Memory: Onboard ECC SDRAM ranges from 32MB to 512MB, while onboard firmware capacity up to 1MB or can be specified by the user.
Interface: Dual PMC ports, support for front panel and P2 input/output (I/O), provide more connectivity and expansion options.
Network communication: 10/100Mb/s Ethernet interface.
Size and weight
Size: The exact size may vary by model or version, but there is usually a size range such as 200mm x 40mm x 50mm
Weight: about 2KG.