–Processor: Equipped with MC68LC040 or optional MC68040 microprocessor, the latter featuring a floating-point coprocessor1.
–Memory: 1MB, 4MB, or 8MB of parity-protected DRAM, and 512KB of static RAM (SRAM) with battery backup1.
–System Controller: VMEbus system controller for seamless integration with VMEbus systems1.
–I/O Interfaces: RS-232 serial ports and potentially other interfaces depending on the manufacturer and configuration2.
Dimensions & Weight:
–Size: Typically measures approximately 170mm x 105mm x 32mm,
–Weight: Weighs around 120g,
1.Parameters:
–Model: MVME162-213
–Processor: MC68040, 25 MHz or 33 MHz options12
–Memory: 2 MB to 32 MB RAM, expandable up to 64 MB12
–Storage: IDE hard disk or flash memory1
2.Specifications:
–I/O Interfaces: 2 RS-232 serial ports, 1 SCSI interface, 1 parallel port, 1 Ethernet interface1
–Power: 5V DC, 10W power consumption1
–Operating Temperature: -40°C to +85°C1
3.Dimensions & Weight:
–Dimensions: 146 mm x 100 mm x 30 mm1
–Weight: 500 grams
Outer diameter: Suitable for various types of three-phase hybrid stepper motors with outer diameter of 86-130mm
Power requirements: Although this parameter is not explicitly stated in the documentation that directly refers to the VME162PA-344SE-2G, typically such devices will require a stable power supply.
specification
Type: Equal Angle constant torque subdivision driver
Internal circuit: The circuit similar to the servo control principle makes the motor run smoothly at low speed, almost no vibration and noise, and the torque of the motor is much higher than that of the two-phase and five-phase hybrid stepper motor at high speed
Volume: 200x156x90(mm3)
Net weight: 1.6kg
Phase memory function: The driver automatically remembers after the input pulse stops for more than 5 seconds
Size and weight
Size: 200x156x90(mm3)
Weight: 1.6kg
Based on the PowerPC architecture, one source says it uses a Freescale MPC7477 PowerPC processor, but another source says it uses a PowerPC 750 processor. Either way, it operates at 1 GHz.
Memory: Up to 2 GB of DDR2 memory, but there are also data showing 1 GB of DDR2 SDRAM.
Storage space: Includes 256 MB Flash and 16 GB SATA hard disk.
Operating temperature: The commercial version has an operating temperature range of 0° to 55°C, while the extended temperature version has an operating temperature range of -20° to 71°C.
specification
Bus: VMEbus bus, support good scalability and compatibility.
Network interface: Gigabit Ethernet, 10/100BaseTX Ethernet.
Serial ports: Multiple serial ports, such as two RS-232 serial ports, one of which can be configured as RS-232/422/485.
USB port: Two USB 2.0 ports.
The operating system supports VxWorks and Linux.
Size and weight
Size: There is less immediate information on the specific dimensions of the MVME5500-0163, but a similar model, the MVME55006E-0163, measures 170mm x 105mm x 32mm and weighs about 120g, which can be used as a reference.
Weight: Again, there is less weight information directly specific to the MVME5500-0163, but models of similar dimensions above weigh about 120g.
argument
Processor: Based on the DSP5600 digital signal processor family, there is talk of using the MPC1 processor, and another is the 1 GHz MPC7450 PowerPC processor.
Operating frequency: There is talk of up to 7457 GHz, but this value is obviously inaccurate and may be miswritten. In fact, the MPC7450 processor may run at frequencies in the hundreds of MHz to GHz category.
Memory: 512 MB ECC SDRAM
Storage: 128 MB Flash
specification
Function: Industrial Single Board Computer (SBC)
Application: Industrial automation, such as process control, motion control, data acquisition, etc
The operating system supports VxWorks and Linux
Size and weight
Dimensions: 233.4 mm x 146.1 mm
Weight: 0.7 kg
argument
Processor: PowerPC750 32-bit microprocessor
Cache: 32 KB/32 KB Level 1 cache, 1 MB back-end level 2 cache
Memory: Onboard ECC SDRAM with capacities ranging from 32 MB to 512 MB
Voltage: Depending on the reference, there are 220V and 24Vdc/120Vac, depending on the usage scenario and configuration
Current: 100-400A (This parameter may be specific to specific application scenarios or related devices, not the MVME2432 itself)
Power: 2700W (This parameter may also refer to the total power of the relevant device or system, not the power consumption of the MVME2432)
specification
Brand: MOTOROLA
Series: MVME series, usually used in embedded systems or industrial automation field
Shape: Square
Color: Standard color
argument
Processor: It uses Motorola’s PowerPC architecture processor, specifically the PowerPC 750, which is a 32-bit microprocessor.
Cache: Has 32 KB/32 KB level 1 Cache (L1 Cache) and 1 MB level 2 cache (L2 Cache).
Memory: Support for on-board ECC SDRAM up to 32 to 512 megabytes, ensuring data integrity and reliability.
Bus: Provides advanced VME bus interface to achieve seamless connection with other devices and systems.
specification
Operating system support: Typically runs UniX-based Real-Time Operating System (RTOS) or Linux, providing users with a flexible development and deployment environment.
Interface support: Support a variety of communication interfaces, such as Ethernet, RS-232, RS-422, RS-485, etc., to meet different communication needs.
Size and weight
Dimensions: 170mm x 105mm x 32mm.
Weight: About 120g.
