Grid view List view

Showing 1–12 of 109 results

Sale!

MOOG D136-001-007

¥16,529.00

Parameters and Specifications:

  • Input Voltage Range: 85-264VAC
  • Output Voltage: +24VDC
  • Rated Output Current: 1.85A
  • Maximum Output Power: 44.4W
  • Operating Temperature Range: -25°C to +70°C
  • Efficiency: >85% (or 90% as mentioned in another result)
  • Overload Protection: 105%-135% rated output power, automatic recovery
  • Overvoltage Protection: 28-32VDC
  • Undervoltage Protection: 19-21VDC
  • Short Circuit Protection: Automatic recovery
  • Insulation Resistance: >100MΩ@500VDC
Sale!

MOOG D138-002-002

¥24,652.00

Parameters and Specifications:

  • Type: High-performance servo controller with PLC functionality
  • Input/Output: Features high-resolution analog input/output and position sensor interfaces
  • Control Accuracy: Provides precise closed-loop control for dual hydraulic servo actuators
Sale!

MOOG D136-001-007

¥18,562.00

Parameters & Specifications:

Model Number: D136-001-007.
Brand: MOOG (also known as Mug, a leading company in motion control technology).
Processor: PowerPC processor, 32-bit, RISC architecture with floating-point unit.
Memory: 4 MB of flash EEPROM for data maintenance, typically lasting for 10 years.
Programming: Supports IEC 61131-3 development environment for programming.

Sale!

MOOG SM23165DT-DE

¥18,675.00

MOOG SM23165DT-DE is a significant PLC spare part offered by MOOG, a globally renowned brand in the field of industrial automation. MOOG is well-known for its advanced motion control technologies and high-quality products.

Sale!

MOOG SM23165D

¥18,540.00

Parameters and Specifications:

Design: MOOG SM23165D is designed for positioning times typically 3 milliseconds or shorter, making it suitable for high-dynamic servo applications.
Torque Ratings: It offers a wide range of torque ratings, with nominal torque from 2 Nm to 99 Nm and peak torque from 11 Nm to 2,89 Nm, providing flexibility for various applications.
Continuous Stall Torque Ratings: The motor provides a range of continuous stall torque ratings from .15 to 77 Nm (1.3 to 681 lb-in), ensuring powerful performance.

Sale!

MOOG G122-829-001

¥19,520.00

Parameters and Specifications:

Input Signals: The amplifier accepts three input signals, including one single-ended and two differential inputs.
Power Supply: It requires a +24V DC power supply for operation.
Internal Switches: Internal selection switches enable the choice of proportional, integral, or both control modes.
Configuration Options: The amplifier offers configurable options due to its years of experience in closed-loop system design and debugging.

Sale!

MOOG G122-824-002

¥20,615.00

MOOG G122-824-002 is a notable product from the well-known brand MOOG, which has a strong reputation in the field of precision control and automation systems.

D136-001-001

¥2,521.00
  • Application Areas: The D136 – 001 – 001 is widely used in the manufacturing industry, such as automotive manufacturing, electronics manufacturing, and machinery production. In the energy sector, it can be found in power plants, oil refineries, and gas – processing plants. It also has applications in the water treatment industry for controlling water treatment processes.
  • Application Case: In an automotive manufacturing plant, the D136 – 001 – 001 was used to control the robotic welding process. It received signals from position sensors to precisely position the welding gun and adjusted the welding current based on the thickness of the metal parts. As a result, the quality of the welds improved significantly, reducing the number of defective products by 20% and increasing the production efficiency by 18%.

5. Comparison with Competitors

 

Compared to similar products in the market, the D136 – 001 – 001 offers a higher number of input and output channels, providing more flexibility in system design. Some competing products may have limited channels, requiring additional modules for complex applications. In terms of reliability, its high MTBF and robust construction make it more suitable for long – term, continuous operation in harsh industrial environments. Also, its relatively fast signal processing speed gives it an edge in applications where quick response is crucial.

6. Selection Suggestions

 

  • Compatibility: Ensure that the D136 – 001 – 001 is compatible with your existing PLC system. Check the communication protocols, voltage requirements, and interface types of your current setup. If you plan to expand or upgrade your system in the future, consider the long – term compatibility as well.
  • Installation Environment: Take into account the operating temperature and humidity of the installation location. If the environment is close to the extreme limits of the specified range, proper measures like cooling or humidity control may be required. Also, be aware of any potential electromagnetic interference in the area and ensure proper shielding.
  • Budget: While the D136 – 001 – 001 offers high – quality performance, compare its cost with your budget. Consider the long – term cost – effectiveness, including potential savings from reduced production downtime and increased productivity.

G122-824-002

¥3,225.00

6. Selection Suggestions

 

  • I/O Requirements: Evaluate the number and type of input and output channels needed for your specific application. If you have a large number of sensors and actuators to connect, the flexible I/O configuration of the G122 – 824 – 002 will be beneficial.
  • Processing Speed: Consider the speed requirements of your industrial process. If you need a fast – responding control system, the high – speed data processing capabilities of this model are essential.
  • Communication Compatibility: Ensure that the communication interfaces and protocols supported by the G122 – 824 – 002 are compatible with your existing industrial devices and network infrastructure.
  • Budget: Compare the cost of the G122 – 824 – 002 with your budget. However, also take into account its long – term benefits, such as improved productivity, reduced maintenance costs, and enhanced system reliability.

7. Precautions

 

  • Installation: Follow the installation instructions carefully to ensure proper grounding and connection of all cables. Incorrect installation can lead to electrical interference, communication errors, and potential damage to the device.
  • Safety Regulations: Comply with all relevant safety regulations during the installation and operation of the G122 – 824 – 002. This includes using appropriate personal protective equipment and following electrical safety procedures.
  • Maintenance: Regularly check the device for any signs of damage, overheating, or loose connections. Clean the device and its ventilation openings to prevent dust accumulation, which can affect its performance and lifespan.

G122-829-001

¥2,032.00

5. Potential Application Areas

 

  • Industrial Automation: In manufacturing plants, it could be used to control and monitor production processes. For example, it could regulate the operation of a robotic arm, monitor the quality of a product on an assembly line, or control the flow of materials in a warehouse.
  • Building Automation: In commercial buildings, it could be used to control and monitor HVAC systems, lighting systems, and security systems. This helps to optimize energy consumption and improve the comfort and safety of building occupants.
  • Energy Management: In power plants, renewable energy facilities, or large – scale industrial complexes, it could be used to monitor and control energy consumption. It can collect data on power usage, voltage, and current, and send control signals to adjust equipment operation for better energy efficiency.

6. Selection Suggestions

 

  • Function Requirements: Clearly define your specific requirements, such as the number of inputs/outputs, the type of control or monitoring functions needed, and the communication protocols required.
  • Compatibility: Ensure that the G122 – 829 – 001 is compatible with your existing industrial equipment, including sensors, actuators, and control systems. Check the electrical specifications, communication interfaces, and software compatibility.
  • Environment: Consider the installation environment, such as temperature, humidity, and the presence of dust or corrosive substances. Make sure the device can operate reliably in such conditions.
  • Cost – Benefit Analysis: Compare the cost of the product with its features and performance. Consider the long – term benefits, such as reduced maintenance costs, improved efficiency, and increased productivity.

T200-410J-0AA1

¥2,624.00
  • Weight: The T200 – 410J – 0AA1 weighs approximately 1.3 kg. This relatively light weight makes it easy to install and handle during the setup and maintenance of industrial control systems.
  • Dimensions: It has dimensions of about 190 mm in length, 140 mm in width, and 50 mm in height. These compact dimensions allow it to be easily installed in standard control cabinets or on DIN rails, saving space in industrial production areas.

4. Features

 

  • High – Precision Control: The T200 – 410J – 0AA1 offers high – precision control capabilities, allowing for accurate positioning, speed control, and force regulation. This is crucial for applications where precise movements and operations are required, such as robotic welding and assembly.
  • Fast Response Time: It has a fast response time to control signals. It can quickly detect changes in the process parameters and send appropriate control signals to the actuators, ensuring real – time control of industrial processes.
  • User – Programmable Logic: The device provides user – programmable logic, which allows operators to customize the control algorithms and parameters according to specific application requirements. This flexibility makes it suitable for a wide range of industrial control tasks.

5. Stability and Reliability

 

  • Robust Design: The T200 – 410J – 0AA1 is built with a durable housing that provides protection against dust, moisture, and mechanical vibrations. This makes it suitable for use in harsh industrial environments, such as automotive plants with high levels of noise, dust, and temperature variations.
  • Redundant Power Supply: Some models of the T200 – 410J – 0AA1 may support a redundant power supply. In case of a power failure, the redundant power source can ensure the continuous operation of the device, preventing data loss and system downtime.
  • Error – Detection and Self – Recovery: It has built – in error – detection mechanisms that can detect and diagnose faults in real – time. It can also perform self – recovery operations, such as restarting a malfunctioning module or switching to a backup control strategy, to maintain system stability.