Size:
220 mm x 176 mm x 89 mm (one way of saying)
170mm x 70mm x 85mm (for DC 12V version only)
112mm×70mm×123mm (another possibility)
100mm x 50mm x 25mm (another way of saying, only for DC 12V version)
Weight:
150g (for DC 12V version only)
100g
Rated voltage: 24 volts DC
Backplane voltage range: 18 to 32 volts DC
Output voltage range: 18 to 32 volts DC
Number of output channels: 8
Dual scan time: 1.174 ms and 2.202 ms are supported
Rated power consumption: 3 watts
Heat dissipation power: 10.2 BTU per hour
Type: ICS TRIPLEX T8448 is an encoder module commonly used in industrial control systems to receive and process encoder signals for position and speed measurement and control
Encoder interface: An interface connected to the encoder for receiving encoder signals, usually supporting a variety of encoder types, such as photoelectric encoder, magnetic encoder, etc
Measurement accuracy: This module is usually able to provide high-precision position and speed measurements for real-time monitoring of the motion state of the equipment
Encoding mode: Supports a variety of encoding modes, such as absolute encoding and incremental encoding, to meet the needs of different applications
Model: T8480C
Enter the score: 32
Input type: numeric input
Voltage range: 24 volts DC
Consumption: Max. 5W
Operating temperature: -40°C to 70°C
Storage temperature: -55°C to 85°C
Humidity: 5% to 95% (non-condensing)
Protection level: IP67
Isolation voltage: 250V RMS
Surge voltage: 4kV
Noise suppression: 500V/μs
Communication protocols: Support a variety of communication protocols, including PROFIBUS DP, Modbus, Ethernet, etc
Number of interfaces: Two RS-232/422/485 interfaces and one Ethernet interface
Baud rate: 9600 bps to 12 Mbps
Power supply voltage: 20 V DC to 32 V DC
Power consumption: less than 10 W
Operating temperature: -40°C to +85°C
Protection level: IP67
Working voltage: 220V
Measurement range: multi-gear optional, such as 1 gear 2%~40%, 2 gear 2%~50%, 3 gear 2%~60%, 4 gear 2%~70%
Resolution: 0.5%
Reaction time: 1s
Measurement error: ±2%
Data lock: Yes
Low battery warning: Yes
Size: 1505427mm (another version is 266mm(10.5 in) x 31mm(1.2 in) x 303mm(12 in)) Weight: 125g (another version is 1.285kg (2.8 lb) or 2kg)
Working voltage: 220V.
Protection performance: With good protection performance, can resist interference and noise in the industrial environment, to ensure the stability and reliability of the input signal.
Communication interface: Equipped with the appropriate communication interface, you can exchange data and communicate with other devices or systems.
Size: There are two versions, one is 263337mm and the other is 266mm(10.5 inches) x 31mm(1.2 inches) x 303mm(12 inches).
Weight: There are two versions, one is 1.285 kg (2.8 lb), the other is 2kg.
Operating voltage: There are two ways to say, one is DC 12V, the other is 24 volts direct current.
Working current: 100mA (only for DC 12V version).
Scanning mode: two-dimensional image scanning (only applicable to DC 12V version).
Scan speed: 400 times per second (only for DC 12V version).
Scanning depth: 5~60cm (only applicable to DC 12V version).
Decoding ability: one-dimensional code, two-dimensional code, PDF417 code, Data Matrix code, etc. (only applicable to DC 12V version).
Temperature range: -20 ° C to 60 ° C (applicable only to the DC 12V version).
Port: USB Type-C (only for DC 12V version).
** Equipment Type :**ICS TRIPLEX T8110B is a three-phase electrical protection relay.
Rated voltage :400/415 V AC.
Rated power :110 kW.
Frequency :50/60 Hz.
protection type: Thermal magnetic protection.
Opening moment :10kA(short time).
Contact type: Type C (shift), with normal open (NO) and normal closed (NC) contacts.
– Model :t8461 card
– Interface: Ethernet
– Power supply :24V DC
– Operating temperature :-40 ° C to 70 ° C
– Size :120mm × 80mm × 25mm
– High-speed data acquisition
– Built-in redundancy to improve reliability
– Support various industrial agreements
– Rugged design for harsh environments
Weight : 1.2
Function : The ICS TRIPLEX 9100 dual processor module is designed to improve the redundancy and availability of the system, ensuring that the system can continue to operate normally if one processor fails. It is widely used in high-demand safety systems, such as fire gas control systems, compressor control systems, as well as chemical, oil, gas, power industry, aerospace and transportation systems and other fields, to ensure the reliable and safe operation of the production process
Model number : ICS TRIPLEX T9451
Type : Analog module
main role : ICS TRIPLEX T9451 analog module is specially designed for industrial automation, process control, monitoring and data acquisition applications, which can receive and convert analog signals from various sensors and instruments into digital format for control system