This device may belong to a series of GE quick Panel view operation terminals. Specific parameters, such as the number of input and output points and number of analog input and output channels, may vary according to the model or configuration
Equipped with color TFT display, provides intuitive operation interface
Dimensions and weight :
The display measures 5.75 inches, has a resolution of 320 x 240 pixels, and is suitable for use as a human-machine interface.
The overall weight of the device is light. may refer to the product manual for the specific value. is easy to install and carry.
30g
Other versions may be heavier, such as 2KG
Insulation resistance: 100MΩ, indicating that it has good insulation performance.
Compressive strength: AC2.5kV/1min, indicating that it can still maintain stability and safety under high voltage.
argument
Rated current: Depending on the specific application scenario, it may vary, but some applications mention 20A
Accuracy: ±0.5%, indicating that it has high accuracy in current measurement.
Frequency range: DC-100kHz, suitable for a wide range of frequencies.
Interface: VMEbus
Number of channels:
Number of analog input channels: 16
Number of analog output channels: 16 bits
Digital I/O: 32 lines
Resolution:
Analog input/output resolution: 16 bits
ADC sampling rate: 500ksps
DAC output rate: 1Msps
Operating temperature: 0 ~ 60℃
Storage temperature: -40℃~ 70℃
Humidity: 5% ~ 95%, no condensation
Power Supply: The 120/230V AC version provides an internal 24VDC power supply to protect against short circuits and overloads
Size and weight
Dimensions: 5.37 x 3.5 x 1.25 inches (136.5 x 88.9 x 31.8 mm)
Weight:
0.39kg (one way to say it)
4.40 pounds
Processor:
The initial version is likely to be powered by a Pentium® III processor up to 1.26 GHz with 512 Kbyte advanced transfer cache
The other configuration uses a Freescale PowerPC 7447A processor at 1.267GHz
Memory:
The initial release supports PC133 SDRAM of up to 512 Mbyte, achieved through a single 144-pin SODIMM
The other configuration supports up to 4GB DDR2 SDRAM
Storage:
The initial version has a built-in 815E chipset AGP graphics adapter, supplemented by 4 Mbyte external synchronous DRAM cache
Supports the CompactFlash Type II card as the storage medium
Operating frequency: 64 MHz
Processor type: Microprocessor 80486DX with 32-bit floating point computing capability
Program and data memory: The Mbyte battery supports CMOS RAM, where 512 Kbytes of memory is available for the user’s applications and data
Clock accuracy: 3.5 seconds per day (Max.), internal timing accuracy 0.01% (Max.)
Operating temperature range: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit), 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit) when forced air cooling.
Operating voltage: Different sources mention voltages that may be 24VDC, 10-30VDC, or others, depending on the application scenario and configuration.
Number of entries: 24
Input type: dry contact
Input signal level: 24 V DC
Output quantity: 12
Output type: Relay output
Output signal level: 24 V DC
Rated current: 10 A
Rated voltage: 250 V AC/DC
Communication interface: Two Ethernet ports (100Base-TX)
Power supply: 24V DC
Input voltage: 90-132VAC or 180-264VAC
Input frequency: 47-63Hz
Efficiency: >80%
Ripple and noise: +5V:<2mVrms, +15V:<1mVrms, -15V:<1mVrms
Protection function: over voltage protection, over current protection, short circuit protection, over temperature protection
specification
Dimensions: 216mm x 102mm x 41mm (L x W x H)
Weight:
1.2kg (one possible weight)
0.8 kg
Operating temperature: 0°C to 50°C
Storage temperature: -40°C to 70°C
Processor: Unity CPU486 processor, 66MHz
Memory: 2M SRAM
Power Supply: Multiple power configurations may be supported, such as the Quantum power supply series
Output points: 8 isolated points
Operating temperature range: -40℃ ~ +85℃
Output current range: 4~20mA
Resolution: 12 bits
Output accuracy: less than 0.25%
