Showing 985–996 of 3226 results

DS200CLACG1A

¥3,262.00

‌ function ‌ :

‌ test function ‌ : DS200CLACG1A can be used for the test of the circuit on the test board, with a test point to facilitate the circuit detection. ‌
‌ Control applications ‌ : As a GE PC board, it may be used in industrial automation and control systems to achieve precise control. ‌

‌ parameter ‌ :

‌ connector ‌ : has a 2-pin connector, four test points, and four screw holes for installation. ‌
‌ Board dimensions ‌ : Dimensions are 2.5 inches high and 5 inches long. ‌
‌ Other parameters ‌, which may include the processor speed, memory size, and control accuracy, are obtained by referring to the product manual. ‌

DS200CPCAG1A

¥2,362.00

‌ Specifications ‌ :

‌ Model ‌ : DS200CPCAG1A‌
‌ category ‌ : Drive ‌
‌ subcategory ‌ : Driver board ‌
‌ brand ‌ : GE‌
‌ original/material ‌ : original, imported ‌

‌ Weight and dimensions ‌ :

‌ weight ‌ : not given directly, please refer to the detailed product manual or contact the supplier for ‌
‌ size ‌ : compact appearance. For the specific size, please refer to the product manual or contact the supplier to obtain ‌

MIFIIPI55E10H100

¥4,105.00

‌ Specifications and parameters ‌ :

‌ ‌ : Used as GE Digital Energy Multilin MIF II digital feeder relay for 3-phase systems ‌
‌ Measuring capability ‌ : voltage test (0-16V, accuracy 0.2%) and internal resistance test (0-50mΩ, accuracy 5%) ‌
‌ protection ‌ : The UPS automatically detects the mains voltage in bypass mode and automatically shuts down the output when the voltage exceeds the range to ensure device safety ‌

‌ Weight and dimensions ‌ :

‌ size ‌ : The product size is MIFIIPI55E10H100mm

DS200TCPSG1APE

¥3,625.00

Product parameters:

Type of device: temperature sensor
Temperature range: -50 c to +150 c (-58 f to +302 f)
Outputs: 2-wire RTD (resistance temperature detector)
Accuracy: + 0.5 degrees c (+ 0.9 degrees f)
Humidity range: 0%rh – 100%rh (non condensing)
Pressure range: standard industrial range (consult manufacturer for specific details)
Material: Stainless steel and other corrosion-resistant materials
**Mounting:**Threaded or flange mount options

HYDRAN M2

¥5,036.00

Product parameters and specifications:

Measurement principle: A capacitive electrode and a thermal conductivity sensor are used to measure the concentration of water and hydrogen in the oil
Measurement range: Moisture (0-10,000 ppm) and hydrogen (0-10,000 ppm)
Accuracy: ±10% or ±25 ppm
Communication interface: RS485, RS232, MODBUS
Operating temperature range: -40°C to 85°C
Power supply: 24 VDC
Dimensions: 190 mm x 160 mm x 80 mm (excluding mounting flanges)
Weight: 1.5kg

SR750-P5-G5-S5-HI-A20-R

¥4,520.00

Ge sr750 – p5 – g5 – s5 – hi – a20 – r: parameters

Manufacturer: general electric (ge)
Type: sr750-p5-g5-s5-hi-a20-r – control and protection device for distributed electricity
Configuration: 0
P5: based on ge multilin p5 platform
G5: 5 input channels with discrete values
S5: 5 output channels with discrete values
Hi: for high voltage networks
A20: 20 analog input channels
R: with a recording function (record)
Power Supply: 88-300VDC, 70-265VAC
Environmental performance: resistant to harsh chemical conditions

GE DS200DCFBG1BLC

¥6,235.00

Specifications of ge ds200dcfbg1blc:

Type: digital introductory module
Manufacturer: general electric (ge)
Interface: network
Color: red
Flow: 120kw
Current: 24ma
Voltage: 240vdc
Frequency: 1000hz
Corrosion resistance: high
Strength: 5000kn
Lifespan: unlimited
Number of interfaces: 4-channel

PCIE-5565RC-100000

¥5,268.00

Ge pcie-5565rc-100000 product parameters:

Interface type: pci express x4.
Sampling rate: 100 ms /s.
Resolution: 16 bit.
Number of channels: 4 differential or 8 singles.
Memory: 256 MB.
Signal generator support: yes.

Specifications of ge pcie-5565rc-100000:

Operating temperature: 0 c to 55 c.
Storage temperature: -40 c to 85 c.
Overall dimensions: 167.6 mm x 111.2 mm.

IS220PDIAH1B

¥2,652.00

‌ Specifications and parameters ‌ :

‌ Rated power ‌ : 220kW‌
‌ Rated voltage ‌ : 400VAC‌
‌ Rated current ‌ : 320A‌
‌ Rated speed ‌ : 3000rpm‌
‌ overload capability ‌ : 150% 1 minute ‌
‌ control accuracy ‌ : speed ±0.01%, torque ±0.5%‌
‌ harmonic suppression ‌ : THD<5%‌
‌ Communication method: ‌ : RS-485, CANopen‌

IC698RMX016

¥3,652.00

‌ Basic specifications and parameters ‌ :

‌ Model ‌ : IC698RMX016‌
‌ memory ‌ : 16MB SDRAM user memory ‌
‌ Power supply ‌ : +5V DC, current 1.8A‌
‌ interface ‌ : optical fiber LC connector, conforming to IEC standard ‌

‌ Dimensions and weight ‌ :

‌ dimensions ‌ : 6.299 inches wide x 9.187 inches high (approx 159.99mm x 233.35mm) ‌

IC695CRU320

¥2,415.00

‌ Core role ‌ :

‌ improves system reliability ‌ : as a redundant processor, ensures seamless switchover when the main processor fails and ensures uninterrupted system operation ‌
‌ Enhanced processing capability ‌ : equipped with a high-performance processor and sufficient memory for complex control tasks ‌
‌ promotes data communication ‌ : communicates with other devices or systems through serial communication ports to achieve real-time data transmission ‌
‌ summary ‌ : The IC695CRU320 is a high-performance, highly reliable, redundant processor designed for industrial control systems. Its redundant features, high-performance processors and communication capabilities ensure stable system operation and data security, and are suitable for application scenarios requiring high availability and continuous operation

369-HI-R-M-0-0-0-E

¥2,652.00

‌ Specifications and parameters ‌ :

‌ function ‌ : motor protection and management, including alarm before tripping, over torque correction ‌
‌ Control power ‌ : 110-250V DC, 100-240V AC, 50/60Hz‌23
‌ Input ‌ : Multiple input options, including RTD input, digital/switch input ‌
‌ communications ‌ : Supports communication modes such as RS485 and optical fiber port ‌
‌ Environmental adaptability ‌ : Operating temperature -40℃ to +60℃, humidity ≤95% (non-condensing) ‌