Interface Type: 32-bit parallel I/O
I/O Points: 32 inputs, 32 outputs
Voltage Range: 24V DC
Current: 2A
Speed: Up to 10 MHz
Size: 167 mm x 68 mm x 23 mm
Weight: 200 grams
It is part of the GE Fanuc series of interface card modules, which also includes modules for analog I/O, serial communication, and special applications.
Input Voltage: Varies, including options such as 24VDC, 48VDC, and 220V
Output Voltage: 24VDC
Output Frequency: 60Hz (in some configurations)
Maximum Output Current: 10A
Operating Temperature Range: -40℃ to +85℃
Dimensions: 100mm x 50mm x 20mm
Weight: Approximately 0.3kg
Model: IC698CPE030.
Manufacturer: GE (General Electric).
Series: PACSystems RX7i.
Input Voltage Range: 12-48VDC.
Output Voltage Range: 5VDC.
Output Current: Max 10A.
Efficiency: Greater than 90%.
Dimensions: 170mm x 105mm x 32mm
Weight: Approximately 120g
Model: IS220PAICH2A
Manufacturer: General Electric
Series: Mark VIe
Type: Analog I/O Module
Inputs: 10 analog input channels (8 configurable as 5V, 10V, or 4-20mA; 2 configurable as 1mA or 4-20mA)
Outputs: 2 current loop outputs (0-20mA), with additional hardware for 0-200mA on the first output
Specific dimensions and weight are not provided in the search results. However, typical dimensions and weight for such modules are usually provided in the product datasheet or manual.
Brand: GE Fanuc (General Electric)
Model: IC660BBA100
Input/Output: 4 analog inputs and 2 analog outputs
Voltage: 115 VAC (also available in 24/48 VDC version as IC66*BBA020)
Resolution: 12-bit
Update Time: 4 milliseconds
Power Dissipation: 7 watts
Analog Power Ranges: 0-10 VDC, +/-10 VDC, +/-5 VDC, 0-5 VDC, 4-20 mA
Dimensions: Approximately 224.4 x 33.4 x 39.1 millimeters
Weight: 4 pounds
Model: GE 8851-LC-MT
Type: Input/Output Module
Power Supply: Standard AC/DC input, providing power to other modules and devices
Output Channels: Multiple output channels for efficient power distribution
Dimensions: Varying reports, with one source stating 23cm in size and another providing dimensions of 10*21 (likely in cm or inches)
Weight: Ranges from 0.2kg3 to 1.32kg, possibly due to different configurations or versions.
Part of the GE industrial automation series, designed to integrate seamlessly with GE systems
Model Number: IC697BEM731
Bus Controller Module for GE Fanuc Series 90-70 PLCs
Supports connection of up to 30 devices
Default baud rate: 153.6 kbps, with a default bus address of 31
Maximum communication distance varies with baud rate: 2000 feet at 153.6 kbps (standard), 3500 feet at 153.6 kbps (extended), 4500 feet at 76.8 kbps, and 7500 feet at 38.4 kbps
Part of the GE Fanuc Series 90-70 PLCs
Series: VMIC Megamodule series
Type: 64-bit TTL Digital Input/Output Module
Control and Data Registers: Independent board address decoding
Fault Detection: Built-in test logic for fault detection and isolation
Dimensions: 26*25*24 (unit not specified, likely mm)
Programmable I/O Directions: Each 8-bit port’s direction can be individually programmed
Current Capacity: 64 mA sink current capability (15 mA source)
Memory Address Mapping: Designed with two sets of board address switches for efficient memory address mapping of CSR and I/O addresses
Data Transfer: Supports 8-bit, 16-bit, and 32-bit data transfers
Resolution: 16-bit digital resolution
Gain: Programmable gain (x1 or x10)
Conversion Rate: 381 Hz to 100 kHz (optional, high-performance option), 381 Hz to 50 kHz (optional, standard performance option)
Input Channels: 16, 32, or 64 differential or single-ended analog inputs
A/D Converter Range: ±2.5 V, ±5 V, ±10 V, 0 to +5 V, 0 to +10 V
Data Buffer: 16 to 1,024 words of dual-port data buffer
Dimensions: 1326*2235mm
Brand: GE
Type: 16-channel analog output board
Output Frequency: 10/100Mbps
Operating System: PLC system
Working Voltage: 18.5 to 36Vdc
Processing Speed: 50MHz
Environmental Temperature: -40 to 80°C
Environmental Humidity: 95% (non-condensing)
Product Certification: UL
Dimensions: 2235 (specific dimensions may vary; this is a rough indication)
Weight: 35kg (for reference only, actual weight may differ)
Interface: VMEbus
Channels: 16 (analog input)
Analog Input Resolution: 16-bit
Analog Output Resolution: 16-bit
Digital I/O: 32 lines
Operating Temperature Range: -40℃ to +85℃, -20°C to +50°C (operating), -40°C to +70°C (storage)
Input Voltage: 5VDC12, 12-48VDC (input voltage range)
Power Consumption: 10W
Size: 6U VMEbus form factor, 170mm x 105mm x 32mm
Weight: 200g1, approximately 120g (variations may exist due to different sources)
** product name :** ge vmivme -5565-110000 card
– ** product description :** ge vmivme 5565-110000 is a high-performance vmebus interface card for industrial applications. It provides reliable and effective data collection and monitoring capabilities.
– interface: vmebus
– compatibility: vmivme -5565-110000
– operating temperature: -40 c to +85 c
– power requirements: 5v, 3.3v