Grid view List view

Showing 2713–2724 of 3479 results

GE 369-HI-R-M-0-E-0

¥5,230.00

Parameters:

  • Voltage: 50-300 VDC / 60-265 VAC1
  • Rated Current: 6.8A1
  • Control Modes: Overload Protection, Undervoltage Protection, Overvoltage Protection, Single-Phase Power Failure Protection, Ground Fault Protection, etc.1
  • Communication Interface: RS-2321

Specifications:

  • Dimensions: 270mm x 180mm x 90mm (or approximately 11.5 inches x 5.5 inches x 8.5 inches)123
  • Weight: About 3.5kg (or approximately 8 pounds)123
  • Material: Aluminum Alloy1
  • Series: GE-369 Series Motor Protection Relay

GE IC698CPE030

¥3,652.00

Parameters and Specifications (参数和规格):

  • Processor Type: Pentium-M microprocessor
  • Clock Speed: 600 MHz
  • Memory: 64 MB RAM / 32 MB Flash
  • Operating System: VxWorks
  • Input Voltage Range: 18vdc ~ 30vdc
  • Operating Temperature Range: -40℃ ~ +70℃
  • Storage Temperature Range: -40℃ ~ +85℃
  • Power Consumption: 5.2 W
  • I/O Points: 2560
  • Communication Ports: Ethernet, Serial, USB12

GE DS3800XAIC1C1C 6BA03

¥4,236.00

Parameters and Specifications (参数和规格):

  • Unfortunately, the exact parameters and specifications for the GE DS3800XAIC1C1C 6BA03 model are not provided in the search results. However, it is generally associated with a DCS (Distributed Control System) or PLC (Programmable Logic Controller) system12.

Dimensions and Weight (尺寸和重量):

  • Specific dimensions and weight information for the GE DS3800XAIC1C1C 6BA03 are not available in the search results.

Series (系列):

  • The GE DS3800XAIC1C1C 6BA03 likely belongs to the GE’s DCS/PLC system series.

GE 8851-LC-MT

¥4,256.00

Parameters (参数) and Specifications (规格):

  • Interface Type: LC1
  • Transmission Rate: 10/100/1000Mbps1
  • Operating Wavelength: 1310nm1
  • Transmitting Power: -9.5dBm~0dBm1
  • Receiving Sensitivity: -20dBm1
  • Maximum Transmission Distance: 10km1
  • Operating Temperature: -40℃~85℃1
  • Power Supply: 3.3V1
  • Compatibility: IEEE802.3z Standard1

GE HYDRAN M2

¥4,205.00
Parameters and specifications:
Measuring principle: Using capacitive electrode and thermal conductivity sensor to measure the concentration of water and hydrogen in oil.
Measurement range: moisture (0-10,000 ppm), hydrogen (0-10,000 ppm). In addition, it can also monitor other fault gases, such as H2, CO, CO2, CH4, C2H4, C2H6, C2H2, O2, etc.
Accuracy: ±10% or ±25 ppm (moisture and hydrogen measurement); ±2% or 2ppm of the reading (other gas measurements, whichever is higher).
Response time: <10 minutes.
Communication interface: RS485, RS232, MODBUS, DNP3, IEC 61850, etc.
Operating temperature range: -40°C~85°C.

GE IC693DNM200

¥5,236.00

Parameters (参数):

  • Rated Voltage: 12-24VDC positive logic1
  • On-state Voltage Drop: 0.3 V DC1
  • Switching Response Time: Maximum of 0.5 milliseconds1
  • Output Channels: 32 output points, 4 per group, 8 groups total1
  • Output Current: 0.5A per point, 4A per group, 3A maximum per group common pin1
  • Surge Current: 5.4A for 10ms1

GE IC695CRU320-CD

¥1,250.00

Parameters (参数):

  • Processor: Celeron M with a speed of 1GHz12.
  • Memory: Supports up to 64 MB of battery-backed RAM and 64 MB of non-volatile flash user memory1.
  • Switching Time: Maximum of 1 logic scan, minimum of 3.133 milliseconds13.

Specifications (规格):

  • Power Requirements: +3.3V DC at 1.0A (nominal), +5V DC at 1.2A (nominal)3.
  • Operating Temperature: 0 to 60°C (32°F to 140°F)3.
  • Embedded Communication: RS-232, RS-4853.
  • Supported Serial Protocols: Modbus RTU Slave, SNP, Serial I/O

GE IC693CPU374

¥4,251.00

Parameters:

  • Processor Speed: 133 MHz (or 33MHz, depending on sources)123
  • Processor Type: Embedded 58623
  • User Memory (Total): 240KB123
  • Storage Type: RAM and Flash12
  • Maximum Memory: 64K bytes1
  • Operating Temperature: 0°C to 60°C12
  • Ethernet Communication Ports: Two, with auto-sensing capability, supporting 10/100 Mbps transmission speed12

GE IC695CPU320

¥3,620.00

Parameters and Specifications:

  • Processor Speed: 1 GHz (Intel Celeron M Microprocessor)12
  • Memory: 64 MB RAM and 64 MB Non-Volatile Flash Memory12
  • User Memory: 65 MB (retained by Lithium Smart Battery Modules)1
  • Communication Ports: 2 Serial Ports supporting RS232 and RS485 communication standards12
  • Maximum Program Blocks: 512 (with maximum block size of 128 KB)1

GE 8521-HC-MT

¥6,235.00
Parameters and specifications:
Brand: GE/ General Electric
Model: 8521-HC-MT
Control principle: Other (advanced multi-group CPU intelligent control)
Processing customization: No
Use: Possible in UPS (uninterruptible power supply) and other industrial automation systems
Operating voltage: Standard V
Output frequency: standard kHz

GE IC697CPX772

¥6,235.00
Parameters and specifications:
Microprocessor: 80486DX4 microprocessor with 96 MHz.
Memory: Built-in 512 KB random access memory (RAM) and 256 KB non-volatile flash memory.
Boolean processing speed: 0.4 microseconds.
I/O capacity: Supports configuration of any combination of inputs and outputs up to 2K and can accommodate analog I/O up to 8K.
Communication interface: It has one RS232 RJ11 serial port and two RS485 communication interfaces in 9-pin type D housing.
Supported protocols: Supports SNP Slave, Break-Free SNP(Slave), SNPX, and RTU serial protocols.
Floating-point computation: Supports floating-point computation and is suitable for real-world computation and trading.
Real-time clock: Equipped with a battery-operated Real-Time clock (RTC) with an accuracy of +/-3.5 seconds per day.

GE IC800SSD104RS1

¥4,325.00
Parameters and specifications:
Brand: GE (General Electric)
Series:
This product may be related to GE’s Fanuc PLC family or other lines of industrial automation products.
Features:
Industrial Automation Compatibility: Designed for industrial automation systems.
Modular design: allows flexibility and scalability in industrial control systems.
High performance: Compared with traditional equipment, it may have advantages in speed, pressure stability, etc.
High electric heating conversion efficiency: the electric heating conversion efficiency of carbon fiber heating tube is more than 98%.
Voltage control: to control the voltage of the heating element to ensure that the heating pipe is in a long-term lighting state and extend its service life.