Grid view List view

Showing 2581–2592 of 3228 results

GE VME-7807RC

¥4,265.00
Parameters and Specifications:
Processor: Intel® Pentium® M. The clock speed options are 1.1 GHz, 1.4 GHz, or 1.8 GHz.
Memory: Up to 2 Mbyte secondary cache (for 1.4 GHz and 1.8 GHz options) and 1 Mbyte (for 1.1 GHz option). Maximum 1.5 Gbyte DDR SDRAM.
I/O and Connectivity: Includes 400 MHz system bus, 4 serial ports, 4 USB 2.0 ports, SATA support, SVGA and DVI-I graphics support, and options for Ethernet connectivity such as 10/100 BaseTX, 10/100/1000 Base Tx, and 2 Gigabit Ethernet ports.
Dimensions and Weight:
Size: 90 x 110 x 60 millimeters (3.54 x 4.33 x 2.36 inches).
Weight: 1.2 kilograms (2.65 pounds) for the GE VME-7807RC-414001 model. However, please note that the exact weight for the GE VME-7807RC model may vary.

GE IC698CMX016

¥5,628.00

Parameters and Specifications:

  • Type: Control Memory Exchange Module
  • Memory: 16 MB SDRAM reflective memory with parity checking
  • Interface: LC fiber port supporting up to 2.12 Gbaud data transfer speed
  • Network Capability: Able to communicate with up to 256 nodes per network
  • Data Transfer Rates: Ranges from 43 MB/s for 4-byte packets to 174 MB/s for 64-byte packets

Dimensions and Weight:

  • The exact dimensions and weight for the IC698CMX016 are not readily available. Please refer to the official GE documentation or product specifications for these details.

GE 8851-LC-MT

¥5,624.00

Parameters and Specifications:

  • Model: GE 8851-LC-MT
  • Interface Type: LC
  • Transmission Rate: 10/100/1000Mbps
  • Operating Wavelength: 1310nm
  • Launch Power: -9.5dBm ~ 0dBm
  • Receive Sensitivity: -20dBm
  • Maximum Transmission Distance: 10km
  • Operating Temperature: -40℃ ~ 85℃
  • Power Supply: 3.3V
  • Compatibility: IEEE802.3z Standard

GE DS2020FECNRX010A

¥6,850.00

Parameters and Specifications:

  • The exact parameters and specifications for the GE DS2020FECNRX010A may vary depending on its intended application and use. However, it is likely a part of GE’s Industrial Solutions portfolio.

Dimensions and Weight:

  • The exact dimensions (length, width, height) and weight of the GE DS2020FECNRX010A are not readily available in general search results. Please refer to the official GE documentation or contact GE for these specific details.

Series:

  • The GE DS2020FECNRX010A likely belongs to a series of products within GE’s Industrial Solutions or a related division.

GE MIFIIPI55E10H100

¥6,032.00
Parameters and specifications:
Brand: ABB
Product type: Robot drive power module
Functions: Designed to provide stable and efficient power support for robot systems
Performance: With excellent performance and reliability, it can meet the needs of various complex robot application scenarios
Design: Advanced power management technology and efficient circuit design are adopted to ensure a stable and reliable power supply for the robot system. The module maintains excellent power output stability under both high and low load conditions
Protection function: With overload protection and short circuit protection function, it can automatically cut off the power supply in abnormal circumstances to prevent damage to the robot system and equipment

GE IC693CPU374-GP

¥4,105.00

Parameters and Specifications:

  • Processor Speed: 240 MHz
  • Memory Capacity: 240 KB
  • Communication Interfaces: Ethernet, RS-232, RS-485, DeviceNet, Profibus-DP
  • Programming Languages: Ladder Diagram, Function Block Diagram, Structured Text, Instruction List
  • Operating Temperature: 0°C to 60°C
  • Operating Humidity: 5% to 95% (non-condensing)

GE 369B1860G0030

¥5,264.00

Parameters and Specifications:

  • Processor: PowerPC 604e1
  • Memory: 128 MB RAM, 512 MB Flash1
  • Interfaces: RS-232, MIL-STD-15531
  • Operating Temperature Range: -55°C to 75°C1
  • Protection Rating: IP671
  • Size: 100mm x 100mm x 50mm1
  • Weight: 0.5 kg1

GE 369-HI-R-M-F-E-0-0

¥4,658.00

Parameters and Specifications:

  • Control Power: Range from 50-300 VDC and 60-264 VAC.
  • Measurement Quantities: Includes phase current, current demand in amperes, motor load in x fLA, percentage of unbalanced current, ground fault current in amperes, input switch status (open or closed), relay output status (energized or de-energized), RTD temperatures, rotational frequency in Hz, phase and line voltages, frequency in Hz, power factor leading/lagging, active power and active power demand in watts, reactive power and reactive power demand in vars, apparent power and apparent power demand in VA, actual power consumption in MWh, and reactive power consumption/generation in Mvarh12.
  • Communication Ports: RS232 port on the front of the relay and RS485 port on the rear34.
  • Environmental Parameters: Operating range from -40°C to +60°C, storage range from -40°C to +80°C. Maximum ambient humidity up to 95% non-condensing3.

GE 239-RTD-AN

¥5,066.00
Parameters and specifications:
Model: 239-RTD-AN
Manufacturer: General Electric (GE)
Protection function: overload, ground fault, locking rotor, etc
Display: Front LCD display displays heat capacity, full load percentage and phase current
Rated voltage: 240 VAC or 480 VAC
Rated current: 20 A to 60 A
Operating temperature: -40°C to +70°C
Fuse rating: 5 x 20 mm, 250 V, 2.5A
Insulation voltage: 300 V
Overload curve trip time accuracy: ± 1% of the displayed value
Short circuit and ground trip (S/C) : Lvl 1 to 11 x CT PRI/ off
Storage temperature range: -40 to 158°F
Unbalanced delay: 0-60 seconds

GE IC698RMX016

¥6,235.00

Parameters and Specifications

  • Type: Redundant Memory Exchange Module
  • SDRAM User Memory: 16MB
  • Power Supply: +5 V DC, Current Requirement: 1.8A
  • Temperature Range: -20°C to +85°C1
  • Connector: IEC 61754-20 compliant LC-type fiber optic connector with zirconia ceramic ferrule
  • Maximum Insertion Loss: 0.35 dB
  • Return Loss: -30 dB1

GE IC695CPU315

¥5,412.00

Parameters and Specifications

  • Processor: RX3i PacSystems 1.0 Gigahertz Celeron M CPU12
  • User Memory: 20 MB12
  • Discrete I/O Memory: 32 KB reserved12
  • Analog I/O Memory: 32 KB reserved12
  • Program Block Support: Up to 512 program blocks, each with a size of 128 KB12
  • Communication Ports: Two integrated serial ports, one supporting RS-232 communication and the other supporting RS-485 communication1
  • Serial Protocols: Supports serial I/O, Modbus RTU slave, and SNP protocols1
  • Current Consumption: 1.2 amps at 5V DC, 1 amp at 3.3V DC1
  • Operating Temperature Range: From 32°F to 140°F1
  • Internal Clock Accuracy: Maximum internal timing accuracy of 0.01%, with a rated peak drift of 2 seconds per day1

GE IC698RMX016

¥6,325.00

Parameters and Specifications

  • Memory: 16MB of SDRAM user memory1
  • Power Supply: Operating voltage of +5 V DC with a current requirement of 1.8A1
  • Temperature Range: Acceptable operating temperature range between -20°C and +85°C1
  • Connectors: IEC 61754-20 compliant optical LC-type connector with zirconia ceramic ferrule1
  • Optical Loss: Maximum insertion loss of 0.35 dB and return loss of -30 dB1

Dimensions and Weight

  • Size: 6.299 inches wide x 9.187 inches high1

Series

  • Part of the GE Fanuc’s Rx7I Pacsystem series1