Grid view List view

Showing 2461–2472 of 3479 results

DS200TCQCG1BGF

¥6,235.00

argument
System memory: 8MB
Current: Support 100-400A
Voltage: 24V
Operating voltage: Input voltage range may include 115-230 VAC, allowing range of 90… 260 VAC
Output frequency: 50kHz May be mentioned in some cases
specification
Model: DS200TCQCG1BGF
Manufacturer: General Electric (GE)
Series: DS200 series
Product type: Microprocessor expansion board or power module, input/output module
dimension
Size: 8.25cm high x 4.15cm

IS220PVIBH1A

¥5,248.00
argument
Input DC power supply: 24VDC to 75VDC
Max. continuous current: 20A
Probe power supply: -24 volts DC, 12 mA load per sensor
Frame rates: 3.125, 6.25, 12.5, 25, 50, and 100 Hz
specification
Dimensions: 3.25 “high x 1.65” wide x 4.78 “deep

IS220PVIBH1A

¥6,230.00
argument
Input DC power supply: 24VDC to 75VDC
Max. continuous current: 20A
Ambient temperature range: -30 to 65 degrees Celsius
Probe power supply: -24 volts DC, 12 mA load per sensor
Frame rates: 3.125, 6.25, 12.5, 25, 50, and 100 Hz
Communication protocol: Support RS232 communication (RS485 and CAN bus optional)
specification
Dimensions: 3.25 “high x 1.65” wide x 4.78 “deep

369-HI-R-M-0-0-0-E

¥5,241.00
argument
Control power supply range: 50-300 VDC and 60-264 VAC.
Input power: 110-250 volts DC, 100-240 volts AC.
Phase current input: 1 A and 5 A.
Differential switch time delay: < 200 ms (for some models such as 369-HI-R-M-0-0-H-E).
specification
Function: Integrated relay protection and control, used for motor protection, control and monitoring.
Communication protocols: Support a variety of communication protocols, such as Modbus, DNP3, etc., easy to integrate with SCADA system or other monitoring systems.
Display and buttons: Equipped with LCD display and buttons for easy field operation and parameter setting.

IC695CPE310-ACAT

¥5,415.00

argument
Processor: 1.1GHz Atom processor
Memory: 10 MB
Embedded Ethernet interface: Supports both 10Mb/ s and 100MB/s connections
Serial ports: RS-485 and RS-232
Block support: Up to 512 blocks, each up to 128 KB
Communication protocols: Modbus RTU slave, SNP and serial I/O protocols
Programming language: ladder diagram, structured text, C or function block diagram
specification
Brand: GE
Model: IC695CPE310-ACAT
Series: GE Fanuc PACSystem RX3i series
Size and weight
Dimensions: 170mm x 105mm x 32mm
Weight: About 120g

IC697CPM790

¥6,524.00
argument
Operating frequency: 64 MHz.
Processor: 32-bit floating point microprocessor based on 80486DX2.
Memory: 1 MB battery backup memory, of which up to 512 KB is available for user programs.
Input/output points:
Discrete input/output: Up to 12K points in any combination in simplex mode, or 2048 votes for discrete inputs and 2048 votes for discrete outputs.
Analog input/Output: Can handle any combination of analog inputs and outputs up to 8K in simplex mode and has 1024 voting analog inputs.
Scan rate: 0.4 microseconds per Boolean function.
Clock accuracy: 3.5 seconds per day (maximum), internal timing accuracy is 0.01% (maximum).
specification
Module type: Circuit board module, standard size and interface specification.
Installation: Requires a single slot on the PLC backplane.

IS215VPROH1BD

¥4,515.00
argument
Rated voltage: 230V AC
Rated current: 15A
Power: 3.45kW
Control voltage: 24V AC/DC
Contact form: 3NO
Installation method: guide rail installation
External power supply: 24V, fluctuation shall not exceed 2.4V, current is 55mA
specification
Brand: GE/ General Electric
Model: IS215VPROH1BD
Type: Digital quantity control module/Power module

IC695CRU320

¥6,258.00
argument
Product type: PACSystems RX3i Redundant CPU
CPU performance: 1 GHz (mentioned)
Battery supported memory: 64 MB
Non-volatile flash: 64 MB
Power requirements: +3.3 volts DC (1.0 amp nominal), +5 volts DC (1.2 amp nominal)
Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Floating point: Support
Time clock accuracy: Maximum drift of 2 seconds per day
Embedded communication: RS-232, RS-485
Supported serial protocols: Modbus RTU slave, SNP
Backplane bus support: RX3i PCI and high-speed serial bus
PCI compatibility: The system is designed to comply with PCI 2.2 standards
Blocks: Up to 512, the maximum size of a block is 128KB

IS200AEADH1A

¥6,235.00
argument
Power supply: 110V-480VAC±10%, single-phase power supply, 50-60Hz±5% Auxiliary power supply can be 110V-120V, 220V-240V±10% or 380V-415V±10%.
Imitation input: 4, speed set/auxiliary set/moment or current limit (+10V/ tonometer motor response (350VDC).
Imitation outputs: 4, speed/ramp given/induction given (+10V)/ armature current (+5VDC).
Digital input: 2, start operation (+10 to 24VDC)/ Gridlock override control (+10V).
Digital output: 2, operating condition detection/zero speed (24V50mA).
See Voltage: 2, -10VDC/+10VDC.
specification
Brand: GE/ General Electric.
Model: IS200AEADH1A.
Use: Automatic control.
Range: 100-230.
Accuracy: 0.1-0.50.

8920-PS-DC

¥4,652.00

argument
Input voltage range: 100-240 volts AC.
Output voltage: 24 volts DC.
Output current: 40A.
Power: 960 watts.
specification
Operating temperature range: Generally believed to be -20°C to 60°C, but another statement is 50 to 80 °C, the specific may vary by product batch or application environment.
Storage temperature range: -40°C to 85°C.
Humidity: 5% to 95% (non-condensing).
Protection class: IP30.
Isolation voltage: 250V RMS.
Surge voltage: 4kV.
Noise suppression: 2 mVp-p.
Size and weight
Size: 254mm x 130mm x 64mm, but it is also said to be 100mm x 50mm x 20mm
Weight: 3.2 kg.

IC695CRU320-CD

¥4,269.00

Parameters and specifications
Processor: Intel Celeron-M microprocessor at 1 GHz.
Memory:
64 megabytes of battery backup user memory
64 megabytes of non-volatile flash user memory
Power requirements:
+3.3 volts DC: 1.0 amp nominal value
+5 volts DC: 1.2 amps nominal value
Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Time clock accuracy: Maximum drift of 2 seconds per day
Blocks: Up to 512 blocks are supported, each with a maximum size of 128KB
Programming support: Use ladder diagram, structured text, functional block diagram and C language programming
Serial protocol: Support Modbus RTU slave, SNP, etc

IC693DNM200

¥4,158.00

Parameters and specifications
Input channels: Has 32 digital input channels.
Input type: Each channel supports discrete signal input and can receive digital input signals such as switches and sensors.
Power requirements: The module is powered by an external power supply with a voltage range of 12-24V DC.
Input level range: Support input level range 0-24V DC.
Communication speed (specific models such as IC693DNM200-BD) : Supports standard DeviceNet transfer rates such as 125K, 250K, and 500K baud.
Rated voltage: 12 to 24 volts DC (positive logic).