Grid view List view

Showing 2449–2460 of 2679 results

GE IC698CRE010

¥6,341.00
Regarding the detailed parameters, specifications, dimensions, weight, series, characteristics and functions of GE IC698CRE010, we can give the following overview based on current knowledge:
Parameters and specifications:
Type: Integrated PLC LD instruction processor module.
Working voltage: 3620V.
Output frequency: 1800Hz.
Processing speed: 1470μs.
I/O count: 2512.
Series:
The GE IC698CRE010 belongs to GE’s family of PLC modules, particularly those related to industrial automation and control systems.

GE IC695CRU320

¥5,430.00
The GE IC695CRU320 is a solid-state automation computer designed and built by GE Fanuc for application logic control of the PACSystems RX3i platform. The following is a specific introduction to its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
CPU performance: IC695CRU320 is a high-performance CPU module with powerful processing power, which can efficiently perform control logic and arithmetic tasks.
Memory: The module supports up to 64 MB of battery-supported memory, while containing 64 MB of non-volatile flash user memory.
Communication interface: The IC695CRU320 has two serial communication ports, namely an RS-232 port and an RS-485 port, allowing effective connection and communication with other devices and systems.
Time clock accuracy: The module’s clock has a maximum shift of 2 seconds per day, and the runtime clock (internal timing) has a maximum accuracy of 0.01%.
Blocks and Support protocols: This module supports up to 512 blocks, each with a maximum size of 128KB. It also supports a variety of serial protocols, such as Modbus RTU slave, SNP, etc.

GE IC695CPE330

¥4,032.00
The GE IC695CPE330 is a high-performance, highly reliable central processing unit (CPU) module from General Electric (GE). The following is a detailed introduction to its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
User memory: 64MB.
I/O specifications: 32k bit discrete I/O and 32k word analog I/O.
Ethernet ports: Three 10/100/1000Mbps ports, two of which are switched ports.
Processor speed: 1 GHz.
Communication protocols: Support SRTP client/server, Modbus TCP/IP, OPC UA, EGD, PROFINET, DNP3 power station, IEC-61850 client, IEC-104 server and other protocols.
Size and weight:
Dimensions: 170mm x 125mm x 166mm.

GE IC698CPE030

¥6,358.00
The GE IC698CPE030 is a Programmable automation controller (PAC) CPU that is widely used in industrial automation and control systems. The following is a specific introduction to its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Processor: The controller uses a 600MHz Pentium-M microprocessor to provide powerful processing power.
Memory: With 64MB of user memory and 64MB of user flash memory, ensuring sufficient data storage and processing power.
I/O capacity: Can accommodate up to 32K bits of discrete I/O and 32K words of analog I/O.
Communication interface: Supports two Ethernet communication ports, one RS232 port, one RS485 port, and one station manager port, providing options for a wide range of communication and connectivity.
Supported protocols: Ethernet supports SRTP, Modbus TCP server and client, Ethernet Global Data (EGD), serial protocols including Modbus RTU slave station, SNP, serial I/O and so on.
Maximum number of program blocks: 512 program blocks can be downloaded, each of which can have up to 128KB of memory.
Size and weight:
Size: There are two size descriptions, one is 170mm x 105mm x 32mm and the other is 7.5 x 8.6 x 1.5 inches. Please note that the dimensions from different sources may vary depending on the measurement method or unit.
Weight: According to some sources, it weighs 1kg. However, there are others that describe it as 2.1 pounds. This may be a difference between versions or measurement methods.

GE IC670MDL730K

¥5,368.00
The GE IC670MDL730K is a module from General Electric that is commonly used in industrial automation and control systems. The following is a specific introduction to its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
User input voltage: 18-30 V DC, nominal 24 V DC.
Output voltage range: 17.5-29.5 V DC.
Number of outputs: 8 output points.
Short-circuit response current: has a 20 amp short-circuit response current lasting 100 microseconds.
Size:
Length: 140mm.
Width: 122mm.
Height: 50mm.
Weight: Specific weight information is not explicitly given in the search results, you may need to consult the product manual or contact the supplier for exact data.

GE UR6AV

¥6,348.00
The following is detailed information about the parameters, specifications, dimensions, weight, series, features and functions of the GE UR6AV:
Parameters and specifications:
Input voltage: three-phase (three-phase four-wire) 380v.
Output voltage: three-phase 0-430v.
Operating frequency: 50Hz/60Hz.
Efficiency: >90%.
Waveform distortion: No additional distortion.
Temperature rise: <60℃.
Electrical strength: 2000V/min.
Insulation resistance: three-phase >2MΩ.

GE UR6AH

¥6,135.00
The GE UR6AH is a digital input module or I/O module for industrial automation and control systems. The following are the detailed parameters, specifications, dimensions, weight, series, features and functions of GE UR6AH:
Parameters and specifications:
Load capacity: 6 kg.
Working radius: 891 mm.
Number of joints: 6.
Repeated positioning accuracy: ±0.02 mm.
Power supply voltage: 200-240 VAC, 50/60 Hz.
Maximum power consumption: 1.6 kW.
Digital input: 6 channels, photoelectric isolation.
Logic level: 24V DC.
Input impedance: 470kΩ.
Digital output: 6, relay output.
Contact capacity: 250V AC/DC, 10A.
Output delay: <2 ms.
Communication interface: RS-232.

GE UR8AH

¥4,268.00
Regarding the parameters, specifications, dimensions, weight, series, features and functions of GE UR8AH, the following is detailed information:
Parameters and specifications:
Operating voltage: Usually 230V.
Output frequency: May reach 560kHz in some applications.
Function: As a simplex servo I/O terminal board, it is part of the Mark VI series used in GE Speedtronic control systems.
Features:
CT/VT Module: UR8AH is a CT/VT module in the general purpose relay family that provides 1A/5A phase CT, 1A/5A ground CT and 4 voltage transformers for UR relays.
Compatibility: It should match older versions of Multilin CPU modules, such as UR-9A, UR-9C, or UR-9D modules.
Protection function: Provide a variety of power system protection functions, including overcurrent protection, short circuit protection, overvoltage protection, undervoltage protection, frequency protection, etc., to ensure the stability and reliability of the power system.

GE DS200DSPCH1ADA

¥4,109.00
The following information is available about the parameters, specifications, dimensions, weight, series, features and functions of the GE DS200DSPCH1ADA:
Parameters and specifications:
Input voltage: DC 24V.
Current: 100-400A.
Output power: 25W.
Operating temperature: -40℃ ~ +85℃.
Size and weight:
Size: There are two possible size descriptions. One is 200mm x 150mm x 50mm and the other is 40 x 40 x 30.
Weight: There are two possible descriptions of weight. One is 1.08kg and the other is 2KG.

GE 8910-PS-DC

¥3,249.00
The GE 8910-PS-DC is a power supply product specifically designed for industrial automation systems, as well as an input/output module, commonly used for signal acquisition and control tasks in industrial automation control systems. The following is a specific introduction to its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Input voltage range: The power supply has a wide input voltage range and can adapt to different input voltage conditions, such as from 18.5 to 36 volts.
Output voltage and current: provides a regulated 12 V 4.9a output.
Size and weight:
Size: Length up to 1200mm.
Weight: According to some sources, its weight is 1.24kg, but some sources show 1.06kg.

GE 469-P5-LO-A20-E

¥3,650.00
The GE 469-P5-LO-A20-E is a motor protection relay designed for large and medium sized motors and is part of the GE Multilin product family. The following is specific information about the parameters, specifications, dimensions, weight, series, characteristics and functions of the relay:
Parameters and specifications:
Voltage: It can operate in the range of 24 to 60 VDC and 20 to 48 VAC, and the frequency is 48 to 62 Hz.
Analog output: Has an analog output range of 4 to 20 mA, identified by “A20” in the model number.
Set point system: Provides a large number of customizable Settings, including allocating inputs, adjusting time intervals, viewing or clearing data, and more.
Size and weight:
Package size: Packages shipped with a width of 12 inches, a height of 11 inches, and a depth of 10 inches.
Weight: About 17 pounds (or about 7.71 kilograms).

GE IS200PMCIH1ABA

¥5,068.00
GE IS200PMCIH1ABA is an industrial automation component that offers a range of features and specifications suitable for various control and monitoring tasks. Here is an overview of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Input Voltage Range: The IS200PMCIH1ABA operates within a specified input voltage range, typically stated in the product documentation.
Output Voltage and Current: It provides a stable output voltage and current, ensuring reliable power delivery to connected devices.
Efficiency: The module is designed for high efficiency, minimizing power loss and maximizing energy utilization.
Dimensions and Weight:
Dimensions: The IS200PMCIH1ABA measures approximately 170mm x 105mm x 32mm.
Weight: The weight of the module is approximately 120g. Please note that the weight may vary slightly depending on the manufacturer’s specifications.
Series:
The IS200PMCIH1ABA belongs to a series of industrial automation components offered by GE.