Grid view List view

Showing 2413–2424 of 3228 results

GE IC695RMX128

¥5,241.00

Parameters and Specifications:

  • User Memory: 128MB SDRAM13.
  • Redundant Configuration: Supports dedicated link operation between RX3i CPUs configured as reflective memory network or redundancy12.
  • Fiber Network: Equipped with LC-type single-mode fiber supporting up to 2.12 Gbaud12.
  • Node Connectivity: Establishes connectivity via fiber network, supporting up to 256 nodes1.
  • Power Requirements: Operates at 580mA @ 3.3V DC and 220mA @ 5V DC13.

GE IC754VSI12CTD-HH

¥6,235.00

Specifications & Parameters:

  • Screen Size: 12 inches
  • Resolution: 1024 x 768
  • Processor: 1GHz ARM Cortex-A8
  • Operating System: Windows CE 6.0
  • Storage Capacity: 128 MB
  • Working Voltage: 24V DC
  • Communication Interfaces: RS232, RS485, Ethernet

GE IC693CPU374

¥6,025.00
Parameters and specifications:
Series: GE Series 90-30 series
CPU Type: single-slot CPU module with embedded Ethernet interface
Processor speed: 133 MHz
Processor type: Embedded 586
Typical scan rate: 0.15 ms per 1K logic (Boolean contacts)
Storage type: RAM and Flash
User memory (total) : 240KB
Protocol support: SNP and SNPX on the RS-485 port of the power supply, support for SRTP and Ethernet Global Data (EGD)
Built-in Ethernet communication: Ethernet (built-in) – 10/100 base-T/TX Ethernet switch, two Ethernet ports, 10/100baseT/TX ports with automatic sensing, one IP address
Operating temperature: 0 to 60 degrees Celsius
Storage temperature: -40 ℃ to +85 ℃
Institutional certification: UL508, C-UL (Level 1, Zone 2, A, B, C, D), CE mark

GE 78004653B

¥3,205.00
Parameters and specifications:
Model: 78004653B
Brand: GE
Warranty: One year
Series:
GE FANUC Series

GE IC660EBD025

¥3,625.00
Parameters and specifications:
Rated voltage: Rated voltage is 5, 12 or 24 volts DC.
Channel update rate: The typical value is 1 second.
Energy consumption: 4.6W Max.
Power consumption: 10.5W.
Communication interface: USB-B.
Cable length: USB data cable length is 5 meters.
Storage temperature: -40°C to +85°C.
Number of input channels: 16.
Input voltage range: DC 24V.
Input signal type: supports digital signal and pulse signal.

GE 369-HI-R-M-0-E-0

¥5,214.00

Parameters and Specifications:

  • Voltage Range: 50-300 VDC / 60-265 VAC
  • Rated Current: 6.8A
  • Control Modes: Overload Protection, Undervoltage Protection, Overvoltage Protection, Single-phase Power Failure Protection, Ground Fault Protection, etc.
  • Communication Interface: RS-232

Dimensions and Weight:

  • Dimensions: 270mm x 180mm x 90mm (L x W x H)
  • Weight: Approximately 3.5kg

Series:

  • GE-369 Series Motor Protection Relay, offered by GE Automation, which includes various models to meet different power and functional requirements for motor protection applications

GE IC752SPL013

¥5,128.00
Parameters and specifications:
Function: Communicate with the excitation control system to monitor and control the excitation system of the generator to ensure that the voltage and frequency of the generator output are within the required range.
Communication interface: It usually has various communication interfaces, such as Ethernet, Profinet IO, etc., to achieve data exchange and communication with the excitation control system.
Automatic adjustment function: The parameters of the excitation system can be automatically adjusted according to the need to maintain a stable power output.
Control principle: The use of specific control algorithms and technologies to ensure the stable output of power generators.
Measurement interval: 5 seconds (8-channel terminal) /10 seconds (16-channel terminal).
Display unit: 3.5″ TFT color LCD monitor (320 x 240 pixels).
Input voltage: 24VDC.
Insulation voltage test: Passed.

GE IC693CPU374

¥4,120.00
Parameters and specifications:
Processor speed: 133 MHz (some sources mention 33MHz, may vary by model or upgrade).
Storage capacity: Total user memory 240KB.
Maximum memory: 64K bytes.
Operating temperature: 0°C to 60°C.
Storage temperature: -40°C to +85°C.
Processor type: Embedded 586.
Typical scan rate: 0.15 ms per 1K logic (Boolean contacts).
Number of IP addresses: one.
Number of Ethernet ports: two, 10/100baseT/TX ports with automatic sensing.
Communication interface: Support SNP and SNPX protocols on RS-485 ports, support SRTP and Ethernet Global Data (EGD).

GE REF615C-D HCFFAEAGABC2BAA1XD

¥6,025.00
Parameters and specifications:
Brand: ABB (although GE is mentioned in the question, ABB is a common brand for this model)
Model: REF615C-D HCFFAEAGABC2BAA1XD
Type: Control relay
Function: Used in industrial automation control system, to achieve the control and monitoring of motor, pump, valve and other equipment
Features:
High reliability: The use of high-quality circuit design and manufacturing process, through strict quality control and testing
Wide operating temperature range: it can work normally under different temperature conditions
A variety of input and output interfaces: including digital input, analog input, digital output, analog output, etc., to meet different control needs
Programmability: Support user programming to achieve flexible control
Easy to operate and maintain: It has a simple and easy-to-use operation interface and friendly man-machine interface, which is convenient for users to set up and monitor
Compatibility: Compatible with a variety of control systems and software
Safety features: Safety features may be in place to ensure that appropriate measures are taken to reduce risks in the event of a problem

GE IC693CMM321

¥4,215.00
Parameters and specifications:
Brand: GE (General Electric)
Model: IC693CMM321
Voltage: The working voltage is 220V
Power: 1200W
Output frequency: 350kHz
Working environment: normal temperature and pressure
Product certification: Has the corresponding product certification, but the specific number is not mentioned in the search results
Application: Suitable for chemical, petroleum, electronics, aerospace, electrical and other fields

GE DS200SHVMG1A

¥5,695.00
Parameters and specifications:
Usage: DS200SHVMG1A is a high pressure M-type interface board, mainly used in the Mark V series gas turbine control system. The board provides interface media from the SCR of the M-frame driver to the power supply board (DCFB or SDCI) and the power Supply connection card (PCCA).
Voltage range: For AC line voltages, which range from 240 to 1000V, the user needs to choose whether to use an attenuator according to the voltage range.
Control principle: Through multi-group CPU intelligent control, the UPS parameters can be controlled and fully controlled, providing enough computing power to ensure that the UPS is in working condition at any time.
Output frequency: A configurable shunt signal between -500 and 500mV is converted into a difference frequency output between 0 and 500kHz.
Accuracy: The exact accuracy parameter is not given directly in the search results.

GE IC693CPU374

¥4,695.00
Parameters:
Processor speed: 133 MHz.
Storage capacity: 240K bytes.
Maximum memory: 64K bytes (but this information is not directly mentioned in the search results, and may overlap parts related to storage capacity or refer to different types of memory).
Operating temperature: 0°C to 60°C.
Storage temperature: -40°C to +85°C.
Number of IP addresses: one.
Specifications:
Processor type: Embedded 586.
Typical scan rate: 0.15 ms per 1K logic (Boolean contacts).
Storage type: RAM and Flash.