Grid view List view

Showing 2341–2352 of 3228 results

IC695CHS012

¥4,521.00
Parameters and specifications:
Series: GE Fanuc RX3i PACSystems series.
Number of slots: 12.
Supported I/O types: PCI (IC695) and serial (IC694) based I/O.
Power specifications: Internal power supplies use 240 mA@5 VDC and 600 mA@3.3VDC.
Internal power consumption rating: 600 mA at 3.3 V DC and 240 mA at 5 V DC.

IC693ALG391

¥6,235.00
Parameters and specifications:
Brand: GE (General Electric), also mentioned GE Fanuc.
Series: 90-30 series PLC controller module.
Type: Analog output, current, 2 channels.
Input voltage: 10VDC.
Operating voltage: May vary according to the specific application, but is generally standard voltage.
Output frequency: not directly mentioned in different data, but PLC equipment usually has a variety of output frequency options.
Size and weight:
Weight: About 0.5KG.

DS200NATOG2A

¥6,252.00

Parameters:

  • Voltage: 24VDC
  • Weight: 2KG (approximately)

Specifications:

  • Dimensions: 8.8 x 3.6 x 4.7 inches (external)
  • Data Capacity: 4KB
  • Processing Speed: 10 MHz
  • Operating Temperature: 0 to 60°C
  • Operating Humidity: 0% – 95% non-condensing

IC695ALG600-AB

¥6,322.00

Parameters and specifications
Series: A family of universal analog input modules belonging to the GE Fanuc PACSystems RX3i PAC platform.
Input signal support: voltage, current, resistance and other input signals, and support thermocouple and resistance temperature detector (RTD).
Channel configuration: With two groups of four channels each, can be configured as any combination of input signals.
Supported signal range: including 0-20 mA, 4-20 mA, +/-20 mA current signal; +50mV, + 150mV, 0-5V, 1-5V, 0-10V, +10V voltage signal; 0 to 250/500/1000/2000/3000/4000 ohm resistance signal; PT 385/3916, N 618/672, NiFe 518, CU 426 RTD sensors; B, C, E, J, K, N, R, S, T thermocouple input.
Installation and configuration: Installed on an RX3i universal backplane, requires firmware version 2.80 or later and configured using Proficy Machine Edition (PME) version 5.0 SP1A LD-PLC Hotfix 1 or later.

IC695ALG600

¥5,268.00

Parameters and specifications
Number of channels: The module has 8 universal input channels and 2 CJC (common) channels, all input channels are divided into two equal groups.
Signal type: Support voltage, current, resistance and other input signals, including thermocouples and resistance temperature detectors (RTDS).
Data type: The data type of each channel is 16-bit integer and 32-bit floating point.
Scale transform function: The analog scale transform function is integrated, which can convert the analog signal collected into the corresponding different numerical output.
series
Series: IC695ALG600 is the analog input module of GE Fanuc RX3i series.

VMIVME-3122-020

¥6,235.00
Parameters and specifications
Resolution: The VMIVME-3122-020 has a 16-bit digital resolution.
Gain: Has program-controlled gain.
Conversion rate: Optional conversion rate.
Input channel: provides 64 differential or single channel automatic scanning functions.
Operation mode: Supports multiple operation modes, including automatic scanning, data burst, and external synchronization.
Input range: A/D converter range is ± 2.5V, ±5v, ±10v, 0 to + 5v, 0 to + 10v.
series
The VMIVME-3122-020 is a high-performance 16-bit analog-to-digital converter board from General Electric (GE) that is part of VMIC’s VMEbus analog input/output product family.

IC695CPU310-GV

¥5,628.00

Parameters and specifications
Model: IC695CPU310-GV
Series: GE Fanuc RX3i series
CPU frequency: 300 MHz
Memory: 10 MB RAM and 10 MB flash
Supported Serial protocols: Modbus RTU Slave, SNP, and Serial I/O
LED indicators: Eight LED indicators on the front of the chassis are used to display the system status
Programming method: Support ladder diagram, structured text, C or function block diagram programming language
Block support: Up to 512 blocks are supported, with a maximum size of 128 KB for each block
Floating-point data format support: Floating-point data format is supported

IC693CPU363

¥4,150.00

Parameters and specifications
Model: IC693CPU363
Series: 90-30 series PLC system
User logical memory: 240KB
Input/output capacity: 4KB
Number of supported racks: 8
Boolean execution speed: 0.22 ms per thousand logic (Boolean contact)
Processor type: 80386X, 25MHz speed
Power required for operation: +5VDC, current 890mA
Working environment temperature: 0 to 60 degrees

IS200EACFG1B

¥5,262.00

Parameters and specifications:

Brand: GE/ General Electric
Model: IS200EACFG1B
Control principle: Other
Processing customization: No
Use: Automatic control
Range: 100-210
Accuracy: 0.1-0.10
Size: 110*210mm

IS200DSPXH1D

¥5,690.00

Parameters and specifications:

Control principle: The use of linear positioning unit, compact organization, good rigidity, easy maintenance.
Operation mode: servo motor drive, fast running speed, stable, high positioning accuracy.
Range: 120-210.
Accuracy: 0.3-0.10.
Size: 140*210mm or 150 mm x 44 mm x 130 mm

Series:

The IS200DSPXH1D is part of GE’s family of industrial automation and control products.

IC695PBM300

¥3,625.00
Parameters and specifications:
Communication capability: The IC695PBM300 is a Profibus DP master module designed to communicate with up to 125 DP slave stations.
Data transfer: Supports data transfer sizes of 244 bytes input and 244 bytes output per device, and supports up to 3.584 bytes input data and 3.584 bytes output data.
Data rate: All standard data rates are supported, including 9.6 kBit/s, 19.2 kBit/s, 93.75 kBit/s, 187.5 kBit/s, 500 kBit/s, 1.5 MBit/s, 3 MBit/s, 6 MBit/s, and 12 MBit/s.
Series:
The IC695PBM300 is part of Emerson Automation’s PACSystems RX3i Programmable Automation controller (PAC) family.

IC694ALG392

¥3,585.00
Parameters and specifications:
Function: It is mainly used for analog output, converting digital signals to analog signal output to control external devices or systems.
Output type: Support voltage and current output, specific voltage/current, 8 channel output type.
Input range: Support 0 V to +10 V, -10 V to +10 V, 0-20 mA, and 4-20 mA input range.
Resolution: 16 bits.
Speed: 8mS.
Current consumption: 110 mA @ 5 VDC (or 24 VDC provided by the user).