Parameters and Specifications:
–Model Number: IC200ALG264H
–Type: Analog Input Module
–Input Channels: 15 channels
–Input Range: 4-20 mA current input or -10V to +10V voltage input1
–Resolution: 16-bit (as per some sources) or 15-bit (as per others)12
–Accuracy: ±0.1%FS (Full Scale) or ±0.3%FS12
–Conversion Time: Less than 2 ms or 7.5 ms13
–Operating Temperature: -40°C to 70°C1
–Power Supply: 24 VDC1
Parameters and Specifications:
–Model Number: IC200ALG264
–Series: VersaMax I/O
–Input Channels: 15 single-ended analog input channels12
–Input Signal Range: Accepts 0-20 mA and 4-20 mA input signals12
–Converter Resolution: 15-bit analog-to-digital converter (ADC) resolution12
–Update Rate: 7.5 milliseconds12
–Accuracy:
Parameters and Specifications:
–Model Number: IC693ALG391F
–Series: May belong to a GE, Allen-Bradley, or a similar manufacturer’s series, as IC693 prefixes are commonly associated with such brands12.
–Function: Typically acts as a CPU (Central Processing Unit) or a controller module in an automation system1.
–I/O Points: Depending on the configuration, may support a medium range of I/O points (256-2048 points)3.
–Processing Speed: Capable of high-speed processing, suitable for real-time control applications3.
Dimensions and Weight:
–Dimensions: Exact dimensions may vary depending on the model and manufacturer. A general estimate for similar modules could be around 100mm x 100mm x 50mm, but please refer to the manufacturer’s specifications for accurate measurements32.
–Weight: Weight will also vary depending on the specific model and manufacturer. A rough estimate for similar modules could be around 1-2kg, but again, please refer to the manufacturer’s data for exact figures
Parameters and Specifications:
–Model Number: IC697BEM713
–Series: GE Genius I/O
–Input Voltage: 24VDC1
–Output Voltage: -0.6V DC1
–NVRAM: 8 KB1
–Voltage Range: 220VDC1
–Data Rate: Up to 500KB/s for efficient data transmission2
–Diagnostic Bus: 2 Mbps HDLC1
–Channel Count: 8 channels1
Dimensions and Weight:
–Dimensions: 166mm x 112mm x 36mm1
–Weight: Approximately 375g1
Parameters and Specifications:
–Input Voltage: 24VDC, 48VDC, and also supports higher voltage ranges up to 250V (DC and AC) for certain models1.
–Output Voltage: 24VDC, capable of powering relays and dry contact input connections1.
–Output Current Range: 4~20mA2.
–Internal Relay Rating: 4A/250V1.
–Output Points: 8 isolated points2.
Dimensions and Weight:
–Dimensions: 40x40x30 mm2.
–Weight: 3.5 kg2.
Series:
Parameters and Specifications:
–Model: IC693CPU352
–Manufacturer: GE Intelligent Platforms
–Input Voltage Range: 85-264V AC, 47-63 Hz or 110-370V DC1
–Output Voltage: 24V DC1
–Power Output: 450W1
–User Memory: Range from 2 to 32 MB depending on controller type2
Dimensions and Weight:
–Dimensions: 166mm x 112mm x 36mm (6.54″ x 4.41″ x 1.42″)1, also mentioned as 48mm x 96mm x 118mm3 (note: the latter might be for a related model or an error)
–Weight: 1.3kg (2.87lbs)1
Parameters and Specifications:
–Model: IC200UEX626
–CPU Type: ARM Cortex-M31
–Input/Output Points: 24 input/24 output1
–Communication Interfaces: Ethernet, RS-232/RS-4851
–Power Supply: 24VDC1
–Maximum Power Consumption: ≤5W2
–Operating Temperature: -20°C to 60°C21
–Humidity Range: 20% to 80% RH2
Dimensions and Weight:
–Dimensions: 96mm x 96mm x 38mm (approx.)2, 90mm x 70mm x 30mm (another spec)1
–Weight: Approximately 100g2, 0.5kg1
1.Parameters:
–Operating Voltage: Typically 220V AC, as mentioned in several sources12
–Output Frequency: Standard kHz range4
–Power Consumption: Not specifically mentioned, but expected to be in line with industry standards for similar modules
2.Specifications:
–Brand: GE12
–Model: IC694MDL75412
–System Compatibility: Designed for use with GE PLC systems12
–Certification: CCC certified3
3.Dimensions & Weight:
–Dimensions: 29mm x 22mm x 3.5mm, as specified in one source1
–Weight: Approximately 1.32Kg, as mentioned in the same source
1.Parameters:
–Processor: 80386EX, 25MHz1
–Scan Cycle: 0.22ms/K1
–User Program Memory: 32KB1
–Communication Interfaces: Serial (SNP/SNP-X supported), LAN (supports multiple protocols)1
2.Specifications:
–Series: GE Fanuc Series 90-3012
–Memory Type: RAM, Flash3
–I/O Capability: Capable of handling up to 4096 I/O points3
–Programming Support: Logicmaster (DOS), VersaPro (Windows), ProficyLogic Developer-Machine Edition3
3.Dimensions & Weight:
–Weight: Approximately 1.32Kg5
Parameters:
–Model Number: IC695PBM300
–Brand: Emerson Automation (GE Intelligent Platforms)
Specifications:
–Type: PROFIBUS DP Master Module
–Communication Ports: 1 RS485 Profibus Master Port
–Supported DP Slaves: Up to 125 PROFIBUS-DP slaves
–Data Transmission:
Parameters:
–Model Number: IC693CPU363
–Brand: GE Fanuc
Specifications:
–Processor Type: Based on the 386EX processor1
–Processor Speed: 25 MHz2
–User Memory: 240 KB12
–I/O Capability: Supports up to 4096 discrete I/O points and 2048 analog I/O points (2048 inputs / 512 outputs)1
–Programming Support: Logicmaster (DOS), VersaPro (Windows), Proficy Logic Developer-Machine Edition13
Dimensions & Weight:
–Dimensions: Standard dimensions for PLC modules, but specific measurements are not provided. Typically, PLC modules are designed for rack mounting14
–Weight: Approximately 2KG5
Series:
1.Parameters:
–Processor: Equipped with a 32-bit RISC processor1
–Program Capacity: 69KB2
–Input Voltage Range: 12-48VDC3
–Output Voltage Range: 5VDC3
–Output Current: Maximum 10A3
2.Specifications:
–Series: IC693 series, specifically the IC693CPU364 model4
–Efficiency: Greater than 90%3
–Communication Interfaces: Supports multi-interface communication, including Ethernet1
3.Dimensions & Weight:
–Size: 170mm x 105mm x 32mm3
–Weight: Approximately 120g3