Parameters and specifications
Manufacturer: General Electric (GE)
Series: Mark VI series
Type: PCB components for industrial control systems
Interface: Has a 37-pin (female) D-connector and a three-pin female plug
Components: Consists of more than 80 resistors, capacitors, diodes and a single integrated circuit
Control function: Up to twelve relays can be controlled and discrete output I/O packets are provided
Size and weight
Weight: Approximately 2.1 kg
Parameters and specifications
Multi-channel control: The F31X305NTBANG1 typically has multiple control channels that can simultaneously monitor and control multiple industrial process variables.
Communication interface: supports a variety of communication interfaces, such as Ethernet, serial port (RS-232, RS-485), Profibus, Modbus, etc., in order to exchange data and communicate with other devices and systems.
High Performance processor: A processor equipped with high performance for performing complex control algorithms and logic.
Storage capacity: Sufficient storage capacity to store applications, configuration data, historical data records, and alarm information.
Real-time operating system: Run a real-time operating system to ensure timely execution of control tasks.
Parameters and specifications
Type: Ethernet module, commonly used for communication in industrial automation and control systems.
Transmission rate:
10/100 Mbps transmission rate is supported.
Some information indicates that IC695ETM001-EH may support higher transfer rates (such as 1000 Mbit/s), but this does not match the description of the standard IC695ETM001 and may be a parameter of a different model or an upgraded version.
Ports: Has two (2) RJ45 Ethernet ports.
Protocol support:
Supports the Layer 4 TCP/IP protocol stack.
The SRTP (Service Request Transport Protocol), Modbus TCP, and EGD (Ethernet Global Data) protocols can be executed.
Processor speed: Ethernet processor speed is 200 MHz.
RS-232 Serial port: Supports data transfer rates from 1200 bps to 115200 bps.
Parameters and specifications
Processor speed: 1.1 GHz Atom processor.
Boolean logic execution speed: 0.72 ms/k.
Memory: 10 MB of non-volatile flash memory for storing data and programs.
Communication interface:
Embedded Ethernet interface, support SRTP protocol, data transfer rate of 10/100 Mbaud.
Two serial ports (RS-232 and RS-485).
I/O capability:
Discrete input and output signal capacities up to 32K bits.
Analog input and output capacity up to 32K words.
Supported protocols: Modbus RTU Slave, SNP, Serial I/O, Modbus TCP server and client, PROFINET, EGD, Profibus DP, etc.
Size and weight
Dimensions: 170mm x 105mm x 32mm.
Weight: About 120g.
Parameters and specifications
Transmission rate: Support 153.5Kbaud standard/extended, 76.8Kbaud or 38.4Kbaud, transmission rate can be configured through software.
Bus terminal resistance: The bus terminal resistance required at both ends of the bus cable is 75, 100, 120, or 150 ohms.
Isolation rating: The isolation rating of the GE controller is 2000 volts and the transient common mode rejection isolation rating is 1500 volts.
Rated current: 300 MA.
Rated voltage: 5 V DC.
Size and weight
Size: Depending on the search results, the exact size may vary by supplier or packaging. For example, some suppliers provide a package size of 135413145mm, but this may be the size of the package box rather than the size of the module itself. The module itself is usually small in size and suitable for installation into a PLC system.
Parameters and specifications
Communication interface: RS-485
Communication rate: 9600bps
Voltage: 24V
Operating temperature range: 0°C~55°C
Size and weight
Size: 120mm×80mm×40mm
Weight: About 0.5kg
series
The IC695NIU001 module is part of the AB 1769 series under the ALLEN-BRADLEY brand from Rockwell Automation. The series is a series of compact programmable automation controllers and modules designed for small and medium-sized industrial automation control systems.
Parameters and specifications
I/O points: Can be configured to handle any combination of discrete I/O and analog I/O, with a maximum number of 1024 discrete input, 1024 discrete output, 64 analog input words, and 64 analog output words.
Communication interface: Has a 15-pin RS-422/485 compatible serial port and a 9-pin IC66 handheld monitor port. Dedicated IC66 bus terminals that support redundancy.
Compatibility: Compatible with handheld monitors version 4.0 or later, directory number IC660HHM501G; CPU firmware version 2.0 or higher, MS-DOS programming software version 3.0 or higher, bus controller version 3.0 or higher if used with IC697 PLC module.
Size and weight
Size: According to the search results, the IC697BEM733 measures approximately 170mm x 105mm x 32mm.
Weight: About 120g.
Parameters and specifications
Processor speed: 300 MHz
Memory: 10 MB RAM and 10 MB flash
Microprocessor: Intel Celeron (Pentium III)
Block support: Up to 512 blocks are supported, with a maximum size of 128 KB for each block
Programming language: Support ladder diagram, structured text, function block diagram and C language
Execution speed: Typical execution speed is 0.195 ms /1000 Boolean instructions
Internal clock: With an internal daytime clock with a maximum deviation of 2 seconds per day and an internal timing accuracy of up to 0.01%
argument
Transmission speed: Support 153.6kbaud transmission speed, the standard configuration includes 153.6kbaud, 76.8Kbaud and 38.4Kbaud.
I/O module support: Each rack supports a maximum of eight I/O modules, a maximum of eight racks, and a total of 64 I/O modules.
Storage capacity: discrete input and output can accommodate up to 1024 points; Analog input and output memory are 128 bytes each.
Network scan: Each scan supports 128 bytes of network input and 128 bits of output.
specification
Size: Depending on the search results, the size will vary slightly. One is described as 166mm x 112mm x 36mm and the other is 170mm x 105mm x 32mm.
Weight: about 375g (one description), or about 120g (another description).
Voltage range: Input voltage range is 12-48VDC, output voltage is 5VDC, and maximum output current is 10A. There are also descriptions that mention voltage ranges including 220VDC, but this may be related to specific application scenarios.
Parameters and specifications
Communication rate: Supports a variety of communication rates, including 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, 93.75kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s.
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption is less than 4W, with DC1500V voltage isolation and reverse protection function.
Lightning protection, overcurrent, surge protection: The electrical interface has 4000V lightning protection, 1.5A overcurrent protection and 600W surge protection.
Electrical connection: 9-pin Sub_D jack connector, pin definition according to Profibus DP protocol specification.
