GE IS200IGDMH1BBB is a key module in the automation control system. The following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters:
Operating voltage: The range is 220v~380v, which enables it to adapt to the voltage requirements of various industrial application scenarios.
Rated power: Up to 1.5A at USB full load 0.5A.
Clock accuracy: The maximum shift per day is 2 seconds.
Specifications:
Execution speed: 0.072 ms per 1000 Boolean instructions.
Number of blocks: A maximum of 512 blocks are supported.
Size and weight:
Size: The exact size may vary depending on the product version and specific configuration, but there is a version of 100mm * 260mm.
The GE IS200DVIBH1B is an intelligent electrical sensor with a wide range of application scenarios. The following is specific information about its parameters, specifications, dimensions, weight, series, characteristics and functions:
Parameters and specifications:
Measurement range: A wide range of current measurements, capable of measuring currents from a few milliamps to thousands of amps. The voltage measurement range also covers both low and high voltage systems. In addition, it can also measure parameters such as active power, reactive power, total power and electrical energy.
Communication interface: supports a variety of communication protocols, such as Modbus, Profinet, etc., allowing the sensor to exchange data with the host computer, PLC or other intelligent devices.
Size and weight:
Size: Specific size parameters may vary from source to source or product version. Some sources indicate that its specification size is 302022mm, while others mention that its size is 110*210mm.
Series:
Series: GE IS200DVIBH1B belongs to the GE IS200 series intelligent sensor.
The GE IC695CRU320 is a redundant processor specifically designed for use in the PACSystems RX3i product family. It is manufactured by GE Fanuc/Emerson Automation and is designed to improve system availability and reliability. The following are the detailed parameters, specifications, size, weight, series, features and functions of the processor:
Parameters and specifications:
Processor: It’s equipped with a 1Ghz Celeron M processor with 64MB of RAM.
Communication interface: Supports two serial communication ports, including RS232 and RS485 communication standards. In addition, there are Ethernet ports and USB ports.
Battery backup: Up to 64MB of battery backup RAM is supported, ensuring data security and integrity in the event of a power failure.
Size and weight:
Weight: Depending on the data, its weight may be around 1.26KG or close to 0.9kg.
Dimensions: Its overall dimensions are 71mm x 138mm x 131mm.
Regarding the parameters, specifications, dimensions, weight, series, features and functions of the GE IS200VSVOH1B module, the following answers are given based on the available information:
Parameters and specifications:
Type: IS200VSVOH1B is a power module or servo control board. The type and application scenario may vary according to the configuration and use.
Channels and outputs: With multiple channels and discrete output channels, the voltage and current of each channel can be independently controlled.
Programming configuration: With the characteristics of programmable configuration, convenient for users to carry out flexible control and application according to actual needs.
The following is detailed information about the parameters, specifications, dimensions, weight, series, features and functions of the GE DS200DDTBG2ABB module:
The parameters, specifications, dimensions, weight, series, features and functions of GE DS200UPSAG1AGD module can be summarized as follows:
Parameters:
Input type: The module can monitor up to 12 RTD (Resistance Temperature Detector) inputs for stator, bearing, environmental or other temperature monitoring.
RTD Type: Each RTD type can be field-programmed to be 100Ω platinum (DIN 43760), 100Ω nickel, 120Ω nickel or 10Ω copper.
Specifications:
RTD circuit compensation: When using a three-wire RTD, the module automatically compensates the wire resistance.
Lead resistance: The lead resistance should not exceed 25Ω (platinum/nickel type RTD) or 3Ω (copper type RTD) per lead.
Series:
Series: The module is part of GE’s DS200 series, an important family of GE’s industrial automation products.
The parameters, specifications, dimensions, weight, series, features and functions of GE DS200SLCCG1AFG module are as follows:
Parameters:
Input voltage: 24V DC.
Maximum current: 1A.
Output voltage: 0-10V DC (some versions).
Output current: 0-20mA (some versions).
Specifications:
Operating temperature: Usually -40°C to +70°C, but some versions may reach -40°C to +85°C.
System storage capacity: 32MB.
Communication protocols: Support Modbus, Profibus, DeviceNet, ControlNet, Ethernet/IP and other communication protocols.
Size and weight:
Size: According to the data, there are two possible sizes. One is 220mm x 120mm x 40mm and the other is 100mm x 50mm x 30mm. This may mean that there are different versions of the module.
The parameters, specifications, dimensions, weight, series, features and functions of GE DS200TCPSG1AME module are as follows:
Parameters and specifications:
Channel status data: The reference address and start address parameters are used to configure the read and reference of channel status data. The number of channel states can be 8 or 16.
Output range: including 0 to 10V, -10 to +10V, 4 to 20mA and 0 to 20mA, users can choose the appropriate output range according to the application needs.
Active channels: indicates the number of channels that the PLC CPU will scan, which is to ensure the effective operation of the system and the accuracy of data acquisition.
Stop mode Output state: When a module switches from RUN mode to STOP mode, it can be configured to remain in the last state or default to zero.
Size and weight:
Weight: The module weighs 0.8KG.
Series:
Series: Part of GE’s DS200 series, this series includes a variety of industrial automation and control products.
The parameters, specifications, dimensions, weight, series, features and functions of the GE DS200TBQCG1ABB module are as follows:
Parameters and specifications:
Switch Settings: When the switch is set to 8 o ‘clock, only the first 8 toggle switches in front of the input simulator can be used. Each module can choose an 8 – or 16-point operation mode.
Response time: Off response time is 20 ms, on response time is 30 ms.
Backplane power consumption: On a 5-volt bus, the internal power consumption is 120mA when all inputs are turned on.
Size and weight:
Dimensions: The board is 11.25 inches long and 3 inches high and is designed for mounting in a rack cabinet.
Series:
The DS200 series is a module in a range of industrial automation and control products offered by GE.
The parameters, specifications, dimensions, weight, series, features and functions of GE DS200TBQBG1ACB module are as follows:
Parameters and specifications:
Model: DS200TBQBG1ACB is an LST TMR reheat card manufactured and designed by GE for the Mark V series of steam turbine control systems.
Frequency: 13.560MHz.
Transmission power: 500w.
Reflected power (at power) : <3w.
Load current: 10ARMS.
Load voltage: 4000VRMS.
Transmission efficiency: >90%.
Load impedance: 50Ω.
Size and weight:
Size: There are two versions, one is 430mm(D)x220mm(W)x130mm(H), the other is 20.4×22.2×3.7cm. This may be due to differences in product versions or different measurement methods.
Weight: 5kg.
Series:
The DS200 series is one of a range of industrial automation and control products offered by GE.
