Grid view List view

Showing 2149–2160 of 3228 results

VMIVME-3122

¥6,252.00
argument
Analog input channels: 64 differential or single-ended inputs.
A/D converter resolution: 16 bits.
Scanning rate:
High performance options: 381 Hz to 100 kHz.
Standard performance options: 381 Hz to 50 kHz.
Programmable channel gain: x1 or x10.
A/D converter range: ± 2.5V, ± 5V, ± 10V, 0 to + 5V, 0 to + 10V.
specification
Data buffer: 16 to 1,024 word dual-port data buffer.
Data space: Supports operations with short I/O (A16), standard (A24), or extended (A32) data space.
Operation mode: Supports automatic scanning, data burst, and external synchronization.

IS200TPROH1C

¥4,158.00

argument
Number of SSI data bits: A data value that defines how many bits of a data stream, ranging from 1 to 32.
The most important point (MSB) quantity: defines the first value of the bit position of the data in the data bit stream, ranging from 1 to 32.
Number of SSI clock bits: The number of bits set to determine the number of bits per interrogation read from the SSI sensor ranges from 1 to 32 and must be greater than or equal to (the most important bit number + (the number of SSI data bits – 1)), the 24-bit default is suitable for most applications.
specification
Rated input: 0 ~ 20 kaac.
Rated output: 0 ~ 20 madc, 0 ~ 5 vdc, 4 ~ 20 madc.
Accuracy: Level 1.0.
Linear range: 0 ~ 120%.
Isolated voltage: 5000vdc/1 minute.
Auxiliary power supply: +12vdc, ±12vdc, +24vdc.
Operating temperature: -20℃ ~ +60℃.

IC754VSF12CTD

¥6,528.00
argument
Screen: 12 inches, 16 bits per pixel, total 65,536 colors.
Resolution: 800 x 600 pixels.
Input voltage: 24 volts DC, the actual power is 48 watts.
CPU: Has an XScale processor, the module has 64MB of flash memory, and supports memory expansion slots.
specification
Type: Fast panel control and view device.
Operating system: Runs with Windows.
Size and weight
Weight: About 5.2 pounds (2.36 kg).

IC695CRU320-EJ

¥5,418.00
Processor:
Early information suggests a 1Ghz Celeron M processor, but subsequent information mentions that it may have a dual-core 1.5GHz processor.
Some information mentions that it has 64MB of memory, while others state that it has 4 GB of Flash and 512 MB of RAM. This may refer to different types of memory or different configurations.
Communication capability:
Serial communication port supporting RS232 and RS485 communication standards.
Support Ethernet/IP, Modbus TCP, PROFINET IO and other communication protocols.
Power Supply:
The supply voltage can be 24 VDC or 120/240 VAC.
specification
Dimensions: 4.42 x 8.03 x 5.11 inches (112.3 x 204 x 129.8 mm).
Weight: 2.8 pounds (1.27 kg),
Operating temperature: 0 to 60°C (32 to 140°F).

IS220PDIOH1A

¥5,682.00
argument
Number of entries: 24
Input type: dry contact
Input signal level: 24 V DC
Output quantity: 12
Output type: Relay output
Output signal level: 24 V DC
Rated current: 10 A
Rated voltage:
Minimum rated voltage: 27.4 VDC
Rated voltage: 28.0 VDC
Rated AC/DC voltage: 250 V AC/DC
Communication interface: Two Ethernet ports (100Base-TX)
Power supply: 24V DC
specification
Size:
230mm x 170mm x 85mm (from product description)
Another possible size is 112 mm x 57 mm x 127 mm (may refer to different models or configurations)
Weight:
2kg (from product description)
Another possible weight is 0.4kg (may refer to different models or configurations)
Also mentioned is 0.8KG

IS220PPDAH1B

¥4,529.00

Parameters and specifications
Series: Mark VIe series.
Processor: Uses 80386EX processor type with a speed of 25MHz.
Ambient temperature: Operate at ambient temperatures of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).
Scan rate: The typical scan rate of a CPU is.22 ms /K.
Memory: The maximum user program memory is 32K bytes.
Power requirements: +5 VDC power supply is required to provide 670 mA.
Communication interface: Equipped with a built-in serial port supporting SNP/SNP-X slave protocol and a LAN port supporting multiple option modules such as multipoint, Ethernet, FIP, Profibus, GBC, GCM and GCM+.
Size and weight
Dimensions: The specification dimensions are 483mm x 220mm x 180mm (L x W x H).

VMIVME-7750

¥4,274.00
argument
Processor: Pentium® III processor up to 1.26 GHz with 512 Kbyte (512 Kbyte at 1.26 GHz) advanced transfer cache
Memory:
The maximum memory capacity is 512 Mbyte, using a single 144-pin SDRAM SODIMM
The graphics adapter is complemented by a 4 Mbyte external synchronous DRAM cache
Graphics:
The built-in 815E chipset AGP graphics adapter supports high-resolution graphics and multimedia quality video
The graphics adapter supports screen resolutions of up to 1,600 x 1,200 x 256 colors (single view mode)
specification
Chipset: Intel 815E chipset with a front end bus rate of 133 MHz
Interface:
Supports the PMC extension interface
Two RS232 serial ports
VME P1: Standard VME connector
VME P2: VME64 connector
System bus: 133 MHz system bus via Intel® 815E chipset
Network:
Dual Ethernet controller, support 10BaseT and 100BaseTX, via two RJ45 connectors
Supports remote LAN booting, utilizing BootWare® from Lanworks Technologies
Size and weight
Dimensions: 170mm x 105mm x 32mm
Weight: About 120g

IC698CMX016-ED

¥5,248.00

argument
Memory Capacity: 16MB SDRAM reflected memory
Operating voltage: +5VDC
Current requirement: 1.8 amps
Data transfer rate:
Maximum network transfer rate: 43 MB/ s (4-byte packets) to 174 MB/ s (64-byte packets)
Data transfer speed: 2.12 Gbaud
Transfer rate range: 6.2 megabytes per second to 3.2 megabytes per second (depending on the density of redundant information)
Dynamic packet size: 4-64 bytes
Number of nodes supported: Up to 256 nodes per network
Maximum transmission distance: 300 meters (or 984.25 feet) of multimode fiber media
specification
Module type: Control memory switch module
Platform: PACSystems RX7i platform
Manufacturer: Currently owned by Emerson Automation, it was previously manufactured by GE Intelligent Platforms (GE IP)
Slot requirements: Need to be installed on the mainframe and connected to slot 3 or 4
Interface type: LC optical fiber port

ACC-5595-208 350-805595-208N

¥6,324.00

argument
Operating voltage: Standard VV (but the specific voltage value is not explicitly given in the search results)
Output frequency: standard kHz (but the specific frequency value is not explicitly given in the search results)
Automatic bypass function: The AC-5595 automatically bypasses the port to detect patterns when there is a lack of synchronization
specification
Product Type: Relay module/port multi-mode reflective memory switch
Application: Widely used in industry, electrical control, power system protection, industrial automation, automation system, manufacturing, building automation, traffic signal system and other fields
Transmission speed: As a reflected memory switch, the transmission speed of its fiber reflected memory network is 170Mbyte/s
Node support: A maximum of 256 nodes are supported
Working baud rate: When working as an RFM board, the working rate is 2.1G baud rate

369-HI-R-M-0-0-0-E

¥4,156.00

Parameters and specifications
Model: 369-HI-R-M-0-0-0-E
Manufacturer: GE Multilin
Function: comprehensive relay protection and control
Application: motor protection, control and monitoring
Main functions:
Protect the motor from over current, under current, over voltage, under voltage, ground fault, short circuit and other electrical faults
Provide real-time monitoring of motor running status, including current, voltage, power, frequency and other parameters
Supports event recording and fault analysis
Users can customize the logical functions
Supports multiple communication protocols (such as Modbus, DNP3, etc.)
Equipped with LCD display and buttons for easy field operation and parameter setting
Modular design, support for expanded I/O modules
Size and weight
Dimensions: Width is about 11 cm, height is about 30 cm, length is about 21 cm
Weight:
The box weighs 10 pounds

RS-FS-9001 362A1052P404

¥6,234.00

Parameters and specifications
Type: The product is available in a variety of possible types, including racks, flame sensors, power expanders, flame detectors, or communication redundant excitation modules.
Material: If it is a frame, the material is steel.
Size: For a rack, the dimensions may be 48x24x72 inches. Please note, however, that this size may not work for other types of products.
Weight capacity: If it is a rack, the weight capacity is up to 2,000 pounds.
Other parameters: For a flame sensor or flame detector, this may include the sensor material (such as silicon carbide SiC), operating temperature range, sensitivity, etc.
Size and weight
Frame: 48x24x72 inches, weight capacity 2000 LBS.

IS220PDIOH1A

¥4,258.00

argument
Number of entries: 24
Input type: dry contact
Input signal level: 24 V DC
Output quantity: 12
Output type: Relay output
Output signal level: 24 V DC
Rated current: 10 A
Rated voltage: 250 V AC/DC
Communication interface: Two Ethernet ports (100Base-TX)
Power supply: 24V DC
Minimum rated voltage: 27.4 VDC, rated voltage is 28.0 VDC