Grid view List view

Showing 1765–1776 of 3228 results

DS200TCPSG1APE

¥4,620.00
The GE DS200TCPSG1APE is a temperature sensor specifically designed for use in industrial automation and control systems. Here are the product parameters, specifications, and application areas in English, in order:
Product Parameters and Specifications:
Sensor Type: Temperature Sensor
Measurement Range: Typically, this range is specified by the manufacturer and can vary depending on the specific model. It is essential to refer to the datasheet for accurate measurement range information.
Accuracy: Specifies the closeness of the measured temperature to the actual temperature. Accuracy is typically expressed in degrees Celsius or Fahrenheit.
Response Time: The time it takes for the sensor to reach a stable output after a change in temperature.
Operating Temperature Range: The range of temperatures within which the sensor can operate safely and accurately.
Output Signal: The type of signal generated by the sensor, such as analog (e.g., 4-20mA or 0-10V) or digital (e.g., RS485 or Modbus).
Power Requirements: The voltage and current required to operate the sensor.
Physical Dimensions: Length, width, height, and any other relevant dimensions of the sensor.

DS200DCFBG1BGB

¥4,065.00
Ge ds200dcfbg1bgb proxy, proxy, proxy:
GE DS200DCFBG1BGB
Product parameters:
Nominal voltage: indicates a standard voltage at which the product can operate without damage.
Frequency: the frequency at which the product operates.
Power: the maximum power the product can produce.
Dimension dimensions: product dimensions including length, width and height.
Weight: product mass.
Technical characteristics of the vehicle:
Device type: description of the device type, e.g. diode, transistor, integrated circuit, etc.

IS220PTURH1B

¥3,024.00

Ge is220pturh1b is a product designed for various applications, including but not limited to industry, energy, transport and others. The main parameters and specifications of this product are presented below.

Product: ge is220pturh1b

Parameters and specifications:

Product type: sensor/transmitter
Temperature range: -200 c to +850 c (-328 f to +1562 f)
Accuracy: + 0.5% of the nominal value
Oltage: 10-32 VDC
Current consumption: maximum 25 ma
Output Signal: 4-20 mA, HART®
Process Connection: 1/4″ NPT (F)
Material: 316l material
Protection Level: IP65
Agency Approvals: CE, ATEX, FM, CSA

PCIE-5565RC-100000

¥2,035.00
GE PCIE-5565RC-100000 is a PCIe (Peripheral Component Interconnect Express) adapter card from General Electric (GE) that likely supports high-speed data transmission and processing. This type of card is typically used in servers, data centers, or other high-performance computing environments.
Product Parameters:
Manufacturer: General Electric (GE)
Model: PCIE-5565RC-100000
Interface: PCIe (Peripheral Component Interconnect Express)
Speed: Likely supports PCIe Gen 3 or Gen 4, depending on the specific version, for high-speed data transfer.
Number of Ports: The number of ports can vary depending on the configuration. This could be a dual-port or quad-port card, for example.
Form Factor: Typically a low-profile or full-height PCIe card, depending on the server or system it is designed for.
Power Consumption: Specifies the amount of power the card requires to operate.
Compatibility: Supports specific server motherboards and operating systems.

VMIVME-7807

¥4,258.00
GE VMIVME-7807 – Product Parameters, Specifications, and Application Areas
Product Parameters:
Manufacturer: General Electric (GE)
Model: VMIVME-7807
Type: VME (VMEbus) Module
Form Factor: Standard VME Size
Supported Processors: Depends on Configuration
Memory: Depends on Configuration (RAM and Flash)
I/O Ports: Depends on Configuration
Operating Temperature: Depends on Configuration and Specifications
Power Requirements: Depends on Configuration
Specifications:
Processor Compatibility: Supports a wide range of processors, depending on the specific configuration.
Memory Capacity: Configurable with various RAM and Flash memory options.
Expansion Slots: Provides expansion capabilities for additional cards or modules.

RS-FS-9001

¥3,058.00
GE RS-FS-9001
Product parameters, specifications and scope
1.  Parameters of tariscope 3.5.
Device type: rs-fs-9001 is most likely a device for protection against electrical energy failure (surge protector) from general electric (ge).
Rated voltage: indicates the standard voltage for which the device is intended.
Maximum voltage: indicates the maximum voltage the device can withstand.
Frequency: the frequency at which the device operates.
Protection functions: rs-fs-9001 is designed to protect against failures caused by external factors, such as atmospheric discharge.
2.  Specifications and specifications
Maximum current: indicates the maximum current the device can withstand.
Response time: indicates the time during which the device will respond to an external failure.
Operating temperature range: indicates the temperature range in which the device can operate normally.
Compliance with standards: indicates that the device complies with certain international and/or national standards.

DS3800HFXA1D1B

¥5,222.00
GE DS3800HFXA1D1B
Product parameters:
Manufacturer: general electric (ge)
Model: ds3800hfxa1d1b
Type of device: speed reducer
Maximum input speed: 3800 RPM
Design type: hydraulic
Entrance diameter: a1
Exit diameter: d1
Ventilation type: internal (internal)
Equipment: 1b

VME-7807RC

¥3,055.00
GE VME-7807RC
Product parameters:
Type: vme-7807rc
Manufacturer: general electric (ge)
Category: intrusion fee
Specifications are as follows:
Temperature range: -40 c to +85 c
Size: (total dimensions, in mm)
Volt requirements: (volt, amper)
Intervention tyre: vme
Slots: 7
Connectors: (type, quantity)
Areas of application:
Aviation systems and equipment
Control and automation systems
Military and aerospace equipment

DS200DCFBG1BNC

¥4,105.00

Input voltage range: Depending on the application, the input voltage range may vary, such as 85 to 264VAC1 or 12-48VDC2.
Output voltage and current: Can provide a variety of different voltage outputs, depending on the configuration, the maximum output current may be 15A1 or 10A2.
Operating temperature range: -25~70℃1, to ensure stable operation under various environmental conditions.
‌ Dimensions and weight ‌ :

Product size: Depending on the description, the size may vary, such as 115mm x 48mm x 150mm1 or 170mm x 105mm x 32mm2.
Product weight: Approx. 1.2kg1 or approx. 120g2, depending on model and configuration.
‌ series ‌ :

The DS200DCFBG1BNC is part of the GE Mark V series and is a replacement and optional power board for a variety of GE brand exciters and drives

IS215UCVEM06A

¥5,206.00
Product Parameters and Specifications:
Model Type: This likely refers to the specific type of industrial sensor, actuator, or control module.
Voltage and Current Ratings: The electrical ratings indicate the safe operating limits for voltage and current.
Operating Temperature Range: The range of temperatures within which the product can operate safely.
Signal Output: The type and range of the electrical signal output from the product, such as analog voltage or digital pulses.
Sensor or Actuator Type: If the product is a sensor or actuator, the type of sensing or actuation mechanism (e.g., temperature, pressure, flow, position, etc.).
Communications Interface: If applicable, the type of communication protocol or interface (e.g., Ethernet, RS-485, wireless, etc.) used for data transmission.
Power Consumption: The amount of power consumed by the product during operation.

IS200TSVOH1B

¥4,625.00
The GE IS200TSVOH1B is a high-performance variable speed drive (VSD) or frequency converter from General Electric’s industrial solutions portfolio. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and applications in English:
Parameters and Specifications:
Voltage Range: 100-240 VAC
Frequency Range: 50/60 Hz
Maximum Output Power: 5.5 kW
Maximum Output Current: 25 A
Operating Temperature Range: -10°C to 60°C
Storage Temperature Range: -40°C to 85°C
Dimensions and Weight:
Size: 200mm x 150mm x 50mm
Weight: 1.5 kg
Series:
The GE IS200TSVOH1B belongs to the IS200 series of variable speed drives from General Electric. This series offers a range of models suitable for various industrial applications.

IC693CPU372

¥5,036.00
GE IC693CPU372 is a modular CPU component produced by GE Fanuc. It belongs to the 90-30 series of components and is designed for use in industrial automation systems. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Processor: AMD SC520, with a clock speed of 133 MHz
User Program Memory: Maximum of 240 Kbytes
I/O Support: Supports 2048 discrete inputs and outputs
Analog Inputs/Outputs: Supports up to 32,640 analog input words and 32,640 analog output words (maximum)
Ethernet Interface: Has two built-in Ethernet ports, supporting 10/100 mbps transmission speeds and compatible with industrial Ethernet and Modbus TCP/IP
Dimensions and Weight:
Size: Not specifically mentioned, but generally modular in design
Weight: Approximately 0.95 pounds (0.43 kg) or 2.4 pounds (1.09 kg), depending on the source