specification
Communication mode: Supports a variety of communication protocols, such as Modbus TCP/IP, RS232, RS485, etc
Display: Front panel with LCD display
Operating buttons and indicators: Features multiple LED indicator areas and a dedicated keyboard
Size and weight
Dimensions: Approximately 100 mm x 70 mm x 30 mm
Weight: 0.5kg
Parameters and specifications
Type: CPU module
Purpose: Installed in the general purpose relay series, provides logic algorithms, logic gates, timers and latches for relay protection elements
Connectivity: The ability to connect with other modules within the relay, such as CT/VT modules, to help determine the parameters collected by the module
Size and weight
Size: According to the search results, the length, width and height of the UR9CH module are 116 units
Weight: 6kg
series
The UR9CH is part of the UR series of relay modules from General Electric (GE)
Parameters and specifications
Resolution: 800 x 480 pixels.
Display: Built-in 7-inch widescreen display.
Input power supply voltage: +24 VDC±20%, accessed through a 3-pin Phoenix connector.
Maximum power consumption: 15 watts.
Cooling method: natural convection.
Operating system: Windows Compact Embedded 7 is pre-installed.
Processor: Intel Freescale i.MX535 1 GHz ARM Cortex A8 processor.
Memory: 512 MB DDR2 SDRAM, 256 MB SLC NAND flash, and 512 KB SRAM.
Communication interface: Ethernet I/P communication port, RS232 communication interface (some information mentions RS485 interface, but most information is RS232).
Parameters and specifications
Type: Control master card module, used for control and monitoring tasks in industrial automation systems.
Function: Process and execute complex control algorithms and logic to achieve accurate control and monitoring of industrial control system.
Processor and chip: The use of high-performance processors and dedicated control chips, with powerful processing power and computing power.
Input/output capability:
For IS200WETBH1BAA, it is a 15-bit differential current module with eight channels of analog input.
For IS200WETBH1BAC or similar models, a variety of interfaces and communication functions may be supported, including digital input/output interfaces, analog input/output interfaces, and communication interfaces (such as Ethernet, serial ports, etc.).
Programmability: Support programmable functions, users can use common programming languages and development environments for program development and customization.
Size and weight
Dimensions: 4.88 inches x 3.28 inches x 1.77 inches (124 mm x 83 mm x 45 mm).
Weight: 0.5 lb (0.23 kg), or 2.1kg (may include packaging or additional parts).
trait
Software configurable: Support RS-232, RS-485 and RS-422 serial communication.
Isolation design: Port to backplane isolation is 250 V AC continuous, port to port isolation is 500 V DC continuous and 710 V DC up to 1 minute.
Fault status report: Provides the fault status report function.
Pluggability: The module can be plugged in and out when the chassis is powered on.
Firmware upgradable: The module firmware can be upgraded.
argument
Operating voltage: Input voltage may include 90-132VAC or 180-264VAC, output voltage may include +5V 20A, +15V 2A, -15V 2A.
Output power: 120W.
Efficiency: >80%.
Ripple and noise: +5V:<2mVrms, +15V:<1mVrms, -15V:<1mVrms.
specification
Protection function: over voltage protection, over current protection, short circuit protection, over temperature protection.
Compliance: Meets various safety standards such as UL, CSA and CE.
Input/output: May contain analog I/O functions for signal input and output.
Size and weight
Dimensions: 216mm x 102mm x 41mm (L x W x H).
Weight: In the search results, there are two statements: 0.8KG and 1.2kg, and the specific weight may vary by product batch or configuration.
series
argument
Processor speed: 133 MHz
Typical scan rate: 0.15 ms per 1K logic
User configurable memory: 240 KB
I/O points:
Discrete points: 2048 inputs/outputs
Analog point: 2048 input /512 output
Discrete global storage capacity: 1280 bits
Register memory: can be configured from 128 to 32640 words
Fixed system registers: 28
Communication speed: Ethernet communication up to 100 Mbps is supported
Power supply: 5 volts DC voltage supply, rated power is 7.4 watts
Operating temperature: 0 to 60 degrees Celsius
Storage temperature: -40 to 85 degrees Celsius
argument
Power supply voltage: 200V
Power: 1800W
Operating temperature: -40°F to +150°F (-40°C to +65°C)
Storage temperature: -40°C to +85°C
Energy consumption: Maximum 4.6 watts (or mention 10.5 watts, which may be power consumption under different conditions)
Equipped with interfaces: RS422 interface hardware, 10/100BaseT(X) ports (power consumption range of 3 watts -9.6 watts), 100Base-FX ports for 2
USB cable length: 5 meters
specification
Type: High voltage M-type interface board, a member of the Mark V series optional and replacement board
Main function: Provides interface media from the SCR of the M-frame driver to the power board (DCFB or SDCI) and the power connection card (PCCA)
argument
Model: IC693CPU363
Brand: GE (General Electric)
Operating voltage: For some models such as IC693CPU363RR, the operating voltage is 220V
Output frequency: For IC693CPU363RR, the output frequency is marked as kHz
Product certification: May include certification such as CCC
specification
Series: IC693 series
Material Code: The specific material code may vary by model and batch
Application: Widely used in CNC machinery, metallurgy, oil and gas, paper printing, textile printing and dyeing, machinery, electronic manufacturing, automobile manufacturing, tobacco, plastic machinery, power plant, water treatment/environmental protection, municipal engineering and other industries
argument
Input voltage: 24V DC
Output voltage: 24V DC
Output current range: 4~20mA
Resolution: 12 bits
Output accuracy: less than 0.25%
Processing speed: 100μs
Program capacity: 6M
Data capacity: 20M
specification
Communication protocol: Ethernet /IP
Operating temperature range: -40℃~85℃
Enclosure protection class: IP67
Product certification: 3C
argument
Manufacturer: GE Fanuc (now GE Automation & Controls)
Product number: IC693CPU374
CPU Type: single-slot CPU module with embedded Ethernet interface
Processor speed: 133MHz (there are also claims of 33MHz, but 133MHz is more common)
Processor type: Embedded 586
Typical scan rate: 0.15 ms per 1K logic
Storage type: RAM and Flash
User memory (total) : 240 KB
Protocol support: SRTP, Ethernet Global Data (EGD), Modbus/TCP client/server protocol
Number of Ethernet ports: two, 10/100 base-T/TX ports with automatic sensing
Number of IP addresses: one
Power supply: 5 volts DC voltage supply, rated power is 7.4 watts
Product Name: GE 469-P5-HI-A20-E PLC Module Product Description: The GE 469-P5-HI-A20-E is a high-performance PLC module designed to offer advanced control and monitoring capabilities for industrial processes. It is suitable for a wide range of applications in manufacturing, utilities, and infrastructure.
Product Parameters: