Showing 1669–1680 of 3228 results

DS215TCEAG1BZZ01A

¥4,368.00

Manufacturer: General Electric (GE).
Model Number: DS215TCEAG1BZZ01A.
Type: It is a servo controller GE or a communication module.
Applications: The module is suitable for measuring gas, steam, and liquid pressures, as well as absolute pressures, in process control applications.
Control Principle: It offers other control principles depending on the specific application.
Accuracy: The module offers an accuracy better than ±0.2%fs.
Connection Options: It supports multiple connection methods such as threaded, clamp, and flange connections.
Sensor Types: It can use ceramic or sapphire high-temperature metal sensors.
Operating Temperature Range: Standard operating temperatures range from -20°C to 80°C, while sapphire sensors can operate at -100°C to 600°C.
Output Signal: It provides a standard 4-20mA output.
Pressure Ranges: The module supports various pressure ranges, including composite pressures, which can be customized to the user’s needs.

DS200PTBAG1BBA

¥3,059.00

Control Type: Likely involves programmable logic control for turbine systems.
Application Range: Suitable for use in a wide range of industries, including numerical control machinery, metallurgy, coal mines, food processing, oil and gas, petrochemicals, chemicals, paper printing and dyeing, textile printing and dyeing, machinery, electronics manufacturing, automotive manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment, environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution, and more.

Dimensions and Weight:

Size (Length): Approximately 21cm.
Weight: Around 0.21kg.
Please note that exact dimensions and weight may vary slightly depending on the specific configuration and accessories. It is recommended to refer to the official product documentation for precise measurements.

RV33-1.3

¥4,215.00

Parameters and Specifications:

Type: GE RV33-1.3 is typically identified as a drive control power board or module.
Working Voltage: Typically operates at 220V.
Output Frequency: Standard output frequency is 350kHz.
Compatibility: Designed for use in DCS (Distributed Control Systems) and PLC (Programmable Logic Controllers) systems.

DS215DENQG3AZZO1A

¥3,052.00

Model Number: DS215DENQG3AZZO1A.
Manufacturer: GE (General Electric).
Application: The module is suitable for use in GE’s PACSystems RX3i series PLCs, specifically as a discrete input module with 125 V DC, positive/negative 8-point configuration.

Dimensions and Weight:

Exact dimensions and weight are not provided in the available information. It is recommended to consult GE’s official product documentation or contact their customer service for accurate measurements.

DS215GHDQG5AZZO1A

¥3,065.00

Model Number: DS215GHDQG5AZZ01A.
Manufacturer: GE (General Electric).

Features:

Versatile Connectivity: The module likely offers multiple communication interfaces, allowing it to integrate seamlessly with other devices and systems within the industrial automation network.
Programmable Functionality: It may feature a programmable interface, enabling users to customize its control strategies and functionalities according to specific application needs.

IC697CPM790

¥4,629.00

Processor Type: It features a 64 MHz, 32-bit floating-point CPU (IC697CPM790) with 1 MB of memory.
Operating System: The module utilizes a dedicated flash memory for the operating system firmware, allowing for firmware updates through the connection between the PC and the module’s serial port.
Input/Output Capacity: It includes up to 12K discrete inputs and outputs, operating in a mixed simplex mode.

Dimensions and Weight:

Dimensions: The module’s size and shape are standardized for easy integration into various devices. However, specific dimensions may vary based on the manufacturer’s specifications.
Weight: The weight of the IC697CPM790 module can also vary, and it is recommended to consult the manufacturer’s documentation for accurate weight information.

IS215VPROH1BD

¥3,650.00

Rated Voltage: Typically, it operates at 230V AC or 24V DC.
Rated Current: It has a rated current of 15A.
Power: With a power rating of 3.45kW, it provides sufficient power for its intended applications.
Control Voltage: The control voltage can be 24V AC/DC.

Specifications:

Type: It is an AC contactor, specifically designed for industrial use.
Contact Form: The module features 3NO (three normally open) contact form.
Installation: It is designed for rail mounting, making installation easy and convenient.

IC695CRU320

¥4,352.00

Parameters and Specifications:

Processor: IC695CRU320 incorporates a 1 GHz CPU, providing high-speed processing and execution of control algorithms.
Memory: It offers 64 MB of battery-backed user memory and 64 MB of non-volatile flash memory for storing programs and data.
Redundant Design: IC695CRU320 supports hot standby redundancy, allowing for seamless failover in case of component failure, ensuring continuous operation of critical applications.

Dimensions and Weight:

The exact dimensions and weight of GE IC695CRU320 may vary slightly depending on the manufacturer’s specifications. However, it is typically designed to fit into standard rack-mounting systems.

D20ME-VME

¥4,629.00

Parameters and Specifications:

Resolution: The D20ME-VME offers a high resolution of 20 bits, which ensures precise analog signal output.
Sampling Rate: With a sampling rate of 100kSPS (kilo-samples per second), it can quickly capture and convert digital data into analog signals.
Power Supply: The module supports a range of power voltages, including +5VDC, +15VDC, and -15VDC.
Output Voltage Range: The analog output voltage range is -10VDC to +10VDC, providing a wide range of adjustable output signals.

Dimensions and Weight:

The exact dimensions of the GE D20ME-VME module are not provided in the given search results, but it is likely to be suitable for standard VME bus mounting.
The weight of the module is not specifically mentioned, but it is expected to be within a reasonable range for industrial modules.

IC695CRU320

¥4,268.00

Processor Type: IC695CRU320 is a 1 GHz CPU from the GE Fanuc RX3i PACSystems product line.
Memory: It comes with 64MB of non-volatile flash memory and 64MB of battery-supported RAM.

Specifications:

Redundancy Capability: Supports hot standby redundancy, allowing for seamless failover in case of any component failure.
Communication Ports: Features two built-in serial communication ports – an RS-232 port and an RS-485 port.
Programming Environment: Compatible with GE’s Proficy Machine Edition, a common development environment for all GE Fanuc controllers.

Dimensions and Weight:

Dimensions: Exact dimensions are not provided, but it is designed to fit within standard industrial automation racks and chassis.
Weight: The module weighs approximately 2.6kg

1C31194G03

¥3,206.00

‌ Specifications ‌ :

1C31194G03 is a valve positioner electronic module 1 from Emerson’s Ovation family.
The module supports rail mounting with specific material codes (e.g. 5214) and system functions1.

‌ function ‌ :

The 1C31194G03 module plays a key role in industrial automation systems and is used to control the valve position, ensuring precise control of the process1.
It may work in concert with other sensors and actuators to implement complex regulation and sequential control strategy

IC695CMU310

¥2,140.00

‌ parameter ‌ :

Up to 10 MB of battery-operated RAM is available for program storage.
The typical Boolean execution speed is 0.195 milliseconds per 100 Boolean contacts or coils.
Two embedded serial communication ports are available, namely RS-232 and RS-485.
Multiple serial communication protocols are supported, such as Modbus RTU slave, SNP and serial I/O protocols.
‌ Dimensions and weights ‌ : Dimensions and weights are not found in Resources. You are advised to consult the official specification documentation or contact the manufacturer for accurate data.