Memory: 64 MB user RAM, 64 MB flash memory.
Serial Ports: 2 independent serial ports supporting SNP, Serial I/O, and Modbus Slave protocols.
Communication: Embedded RS-232, RS-486.
Development Environment: Proficy Machine Edition.
Dimensions: 170mm x 105mm x 32mm.
Part Number: IS215VCMIH2B
Manufacturer: General Electric (GE)
Country of Manufacture: United States (USA)
Product Type: VME Bus Master Controller
Series: Mark VI
The weight of the IS215VCMIH2B is not explicitly mentioned but the weight of a similar product is 0.53. It may vary based on specific configurations or versions.
The IS215VCMIH2B serves as a communication interface card for gas turbine control systems, part of the Mark VI series. It acts as a bridge between the controller and I/O boards, as well as the IONet system control network.
Ethernet Connectivity: The IC695ETM001 provides Ethernet connectivity, enabling PACSystems RX3i controllers to communicate with other PACSystems devices, 90-series controllers, and VersaMax controllers.
Transmission Speed: It supports a transmission speed of 10/100 Mbps, allowing for high-speed data exchange.
Protocol Support: The module can execute protocols such as SRTP, EGD (Producer and Consumer), and Modbus TCP/IP, facilitating diverse communication needs.
The specific dimensions and weight of the GE IC695ETM001 module are not provided in the available search results. It is generally a compact module designed for rack-mounting in industrial control systems.
Chipset: Features the Intel 82945GM (GMCH) and 82801GBM/FB (ICH7M/ICH7) chipsets.
System Memory: Equipped with a single DDR2 SODIMM200 socket for user-selectable DDR2 memory, supporting DDR2-400/533/667 up to 2GB (DDR2 frequency must be compatible with the CPU).
Graphics Controller: Features a 3D hyper-pipelined architecture for parallel data processing, accurate pixel insertion, 3D hardware acceleration, and animation acceleration capabilities with a 400MHz RAMDAC.
Display Resolution: Supports QXGA (2048 X 1536) mode, with single-channel LVDS (18-bit/24-bit) display output, achieving resolutions up to 1400×1050@18bit and 1600×1200@24bit.
The physical dimensions of the VMIVME-2532A are approximately 96mm x 96mm x 38mm.
The module weighs approximately 0.82 kilograms.
Functionality: It is designed to connect and control distributed input and output devices in industrial automation systems.
Communication Interfaces: It typically features multiple communication interfaces to exchange data and integrate with other control systems, PLCs (Programmable Logic Controllers), or upper-level control systems.
I/O Modules: The controller supports connecting various input modules (e.g., sensors, switches) and output modules (e.g., actuators, relays).
Industrial Protocols: It supports common industrial communication protocols, such as PROFINET, Modbus, ensuring compatibility with other devices.
Size: Measures approximately 170mm x 105mm x 32mm.
Weight: About 120g.
Model Number: DS200TCPDG2BEC
Control Principle: DCS (Distributed Control System)
Processor Speed: 25MHz
Dimensions: There are two sets of dimensions available. One source lists it as 21326, while another source provides 302022. The exact dimensions can vary depending on the specific configuration or version.
Weight: The module weighs approximately 0.12 kilograms.
Type: The DS200TCTGG1AFF is a control module, specifically designed for use within industrial control systems.
Input/Output: Depending on its configuration, it can handle various input and output signals, allowing for precise control and monitoring.
Dimensions: Exact dimensions for the DS200TCTGG1AFF are not available in the search results. The size is likely to be compact, suitable for integration into standard control cabinets.
Weight: Similarly, the exact weight is not mentioned. It is likely to be within a range suitable for industrial applications.
Model Type: Analog Input/Output (AI/AO) Package.
Power Supply: Nominal voltage of 28.0 VDC, with a range from 27.4 VDC to 28.6 VDC.
Certifications: UL E207865 for harmless certification.
Temperature Range: Operating between -22°F to 149°F (-30°C to 65°C).
Environmental Compatibility: Suitable for use in hazardous and non-hazardous locations, including ATEX Zone IIC, Class 2 Division 2 Groups A, B, C, and D.
Weight: Approximately 1.05 kg.
Exact Dimensions: Specific dimensions are not provided in the search results. It is recommended to refer to the manufacturer’s official documentation for accurate measurements.
Model Type: The IS220PAICH1A is described as an analog input/output (I/O) pack or module.
Power Requirements: The module has a power range of 27.4 to 28.6 volts DC, with a nominal voltage of 28.0 volts DC.
Temperature Range: The module is designed to operate within a temperature range of -22 to 149 Fahrenheit.
Certifications: It is UL E207865 certified and may have additional certifications for use in various environments, including hazardous locations.
Weight: The weight of the module is not specifically mentioned in the search results. However, similar components from the same manufacturer may provide an approximation or a general range for weight.
Dimensions: Similarly, specific dimensions are not provided. It is typically recommended to refer to the manufacturer’s official documentation for accurate measurements.
Dimensions: The exact dimensions may vary, but one source indicates 11.5 x 7.5 x 3.5 inches. Another source suggests that the dimensions might be different, but without specifying exact numbers.
Weight: The weight can vary depending on the source. One source gives it as 3.5 pounds, while another suggests it is 1.2kg.
Communication Capability: It is an I/O (Input/Output) discrete quantity input module that receives and processes discrete input signals from sensors, switches, buttons, etc..
Versatility: It can be used in various industrial automation systems, including manufacturing, energy, water treatment, chemicals, and power, for monitoring and controlling various devices and processes.
Vibration Measurement: The PCH1026 incorporates advanced technology for accurate and reliable vibration measurement. It can monitor vibrations from multiple sources and directions, providing detailed insights into the operational state of industrial equipment.
Frequency Range: The instrument covers a wide range of frequencies, enabling it to detect and analyze vibrations across various industrial applications.
Output Options: The PCH1026 offers flexible output options, including analog and digital outputs, for easy integration with other systems and devices.
Multiple Sensors: The PCH1026 incorporates multiple vibration sensors (accelerometers) that enable it to measure vibrations in multiple directions and axes, providing a comprehensive view of the equipment’s vibration profile.
Programmable Alarms: The instrument features programmable alarm relays that can be configured to trigger alerts when certain vibration thresholds are exceeded. This allows for proactive maintenance and fault detection.
Rated Power: 220kW.
Rated Voltage: 400VAC.
Rated Current: 320A.
Rated Speed: 3000rpm.
Overload Capacity: 150% for 1 minute.
Speed Control Accuracy: ±0.01%.
Torque Control Accuracy: ±0.5%.
Harmonic Suppression: THD < 5%. Power Factor: > 0.95.
Protection Features: Include over-current, over-voltage, over-temperature, and short-circuit protection.
Communication Methods: Supports RS-485 and CANopen communication protocols.