–Model Number: IC697RCM711
–Manufacturer: General Electric (GE)
–Input Voltage Range: 12-48VDC, indicating its compatibility with a wide range of industrial power supplies1
–Output Voltage: 5VDC, suitable for powering low-voltage devices or circuits1
–Output Current: Maximum 10A, allowing for the handling of substantial electrical loads1
Dimensions and Weight:
–Dimensions: 170mm x 105mm x 32mm, indicating a relatively compact size suitable for installation in industrial control cabinets1
–Weight: Approximately 120g, making it lightweight for easy handling and installation1
Series:
Part of GE’s ControlLogix series of programmable automation controllers (PACs), designed for large-scale and complex automation systems2
–Model Number: IC200PNS001
–Manufacturer: GE Fanuc Automation (now Emerson Automation Solutions)
–Communication Protocols: Supports Profinet, Modbus, and potentially other industrial communication protocols12
–Power Supply: DC voltage range (e.g., 9-36V) with dual power redundancy for high reliability3
–EMC Tested: Complies with industrial EMC standards3
Dimensions and Weight:
–Dimensions: Approximately 134mm (5.28 inches) x 132mm (5.2 inches)4
–Weight: Around 0.5kg to 0.82kg
–Model Number: IC676PBI016
–Manufacturer: GE Fanuc Automation (now part of Emerson Automation Solutions)
–Input Voltage: Typically 10-300V DC1
–Operating Temperature: -20°C to 60°C2 (or 0°C to 55°C depending on context3)
–Storage Temperature: -40°C to 85°C2
–Humidity: 10% to 90% RH (non-condensing)2
Dimensions and Weight:
–Dimensions: 100mm x 80mm x 30mm2
–Weight: 200g
Series:
Belongs to the PACSystems series from GE Fanuc Emerson, specifically designed for industrial automation control3
Parameters and Specifications:
–Model Number: IC697CMM711
–Series: 90-70 PLC System1
–Type: Single-slot Communication Coprocessor Module1
–Processor: 12MHz, 80C1861
–Interfaces: Two RS-422/RS-485 or RS-232 serial ports1
Dimensions and Weight:
–Dimensions: 48mm x 96mm x 118mm (L x W x H)2
–Weight: 0.5KG3
Parameters and Specifications:
–Model Number: IC200ALG264H
–Type: Analog Input Module
–Input Channels: 15 channels
–Input Range: 4-20 mA current input or -10V to +10V voltage input1
–Resolution: 16-bit (as per some sources) or 15-bit (as per others)12
–Accuracy: ±0.1%FS (Full Scale) or ±0.3%FS12
–Conversion Time: Less than 2 ms or 7.5 ms13
–Operating Temperature: -40°C to 70°C1
–Power Supply: 24 VDC1
Parameters and Specifications:
–Model Number: IC693ALG391F
–Series: May belong to a GE, Allen-Bradley, or a similar manufacturer’s series, as IC693 prefixes are commonly associated with such brands12.
–Function: Typically acts as a CPU (Central Processing Unit) or a controller module in an automation system1.
–I/O Points: Depending on the configuration, may support a medium range of I/O points (256-2048 points)3.
–Processing Speed: Capable of high-speed processing, suitable for real-time control applications3.
Dimensions and Weight:
–Dimensions: Exact dimensions may vary depending on the model and manufacturer. A general estimate for similar modules could be around 100mm x 100mm x 50mm, but please refer to the manufacturer’s specifications for accurate measurements32.
–Weight: Weight will also vary depending on the specific model and manufacturer. A rough estimate for similar modules could be around 1-2kg, but again, please refer to the manufacturer’s data for exact figures
–Input Voltage: 24VDC, 48VDC, and also supports higher voltage ranges up to 250V (DC and AC) for certain models1.
–Output Voltage: 24VDC, capable of powering relays and dry contact input connections1.
–Output Current Range: 4~20mA2.
–Internal Relay Rating: 4A/250V1.
–Output Points: 8 isolated points2.
Dimensions and Weight:
Parameters and Specifications:
–Model: IC693CPU352
–Manufacturer: GE Intelligent Platforms
–Input Voltage Range: 85-264V AC, 47-63 Hz or 110-370V DC1
–Output Voltage: 24V DC1
–Power Output: 450W1
–User Memory: Range from 2 to 32 MB depending on controller type2
Dimensions and Weight:
–Dimensions: 166mm x 112mm x 36mm (6.54″ x 4.41″ x 1.42″)1, also mentioned as 48mm x 96mm x 118mm3 (note: the latter might be for a related model or an error)
–Weight: 1.3kg (2.87lbs)1
1.Parameters:
–Operating Voltage: Typically 220V AC, as mentioned in several sources12
–Output Frequency: Standard kHz range4
–Power Consumption: Not specifically mentioned, but expected to be in line with industry standards for similar modules
2.Specifications:
–Brand: GE12
–Model: IC694MDL75412
–System Compatibility: Designed for use with GE PLC systems12
–Certification: CCC certified3
3.Dimensions & Weight:
–Dimensions: 29mm x 22mm x 3.5mm, as specified in one source1
–Weight: Approximately 1.32Kg, as mentioned in the same source
