Parameters & Specifications:
–Model: IC693ALG39012.
–Input Voltage Range: Typically 12-48VDC3.
–Output Voltage: 5VDC3.
–Output Current: Maximum 10A3.
–Efficiency: Greater than 90%3.
Dimensions & Weight:
–Dimensions: Approximately 170mm x 105mm x 32mm3.
–Weight: Around 120g3.
Parameters and Specifications:
–Model Number: IC200PWR10212.
–Brand: GE Fanuc (now part of Emerson Automation)12.
–Series: VersaMax Product Series12.
–Input Voltage: 85-132 VAC / 176-264 VAC, configurable with jumpers12.
–Output Voltage: 5 VDC and 3.3 VDC12.
–Total Output Current: 1.5 A12.
–Input Power: 27 VA12.
–Hold-up Time: Approximately 20 ms1.
–Frequency Range: 47-63 Hz1.
Parameters:
–Nominal Voltage: 24V DC, providing a stable voltage source for industrial equipment12.
–Input Voltage Range: 18VDC to 30VDC (startup) and 12VDC to 30VDC (operation), ensuring compatibility with a wide range of input power sources12.
Specifications:
–Input Power: 60W, capable of handling sufficient power to support connected devices12.
–Load Capacity: 40W, allowing it to power various components within the automation system12.
Dimensions & Weight:
–Weight: Approximately 0.17kg
Parameters:
–Resolution: 12-bit, providing high accuracy for analog signal conversion1.
–Channels: 4 channels, capable of handling multiple analog inputs simultaneously1.
Specifications:
–Input Type: Voltage/Current, suitable for a wide range of sensor inputs1.
–Installation: Control room installation, designed for use in industrial control environments2.
Dimensions & Weight:
–Dimensions: Not explicitly stated, but typically designed for compact installation in control cabinets2.
–Weight: Lightweight, allowing for easy handling and mounting, but specific weight information is not provided2.
Series:
Parameters and Specifications:
–Power Requirements: 5V DC ±5%1. Alternatively, some sources mention an input voltage range of 12-48VDC with an output voltage of 5VDC2.
–Power Consumption: 200 mA at 5V DC1.
–Data Rate: Supports up to 125 Kbps1.
–Data Transmission: Supports 4, 8, or 12 bytes of data transmission1.
–Input/Output Data: Provides up to 128 bytes of input and output data1.
Dimensions and Weight:
–Dimensions: 4.88 inches x 4.00 inches x 1.57 inches (124 mm x 102 mm x 40 mm)1. Some sources mention a different size of 170mm x 105mm x 32mm2, but this may refer to a different model or packaging.
–Weight: Approximately 120g according to one source2, but an exact weight may vary depending on packaging and accessories.
Parameters:
–Input Voltage: Designed to operate within a range compatible with RX3i PLC systems, often 24V DC1.
–Input Type: Typically a digital input module, capable of handling various digital signals2.
Specifications:
–Series: RX3i series of PLC modules from GE.
–Model: IC694MDL660, offering specific functionality within the RX3i platform.
Dimensions & Weight:
–Dimensions: Approximate dimensions are 42x76x97mm, ensuring a compact form factor suitable for panel mounting1.
–Weight: Lightweight, around 364g, facilitating easy installation and maintenance1.
Series:
Parameters and Specifications:
–Output Channels: 8 channels, configurable for analog output signals.
–Output Signals: Configurable for 0-20 mA, 4-20 mA current signals, and ±10V, 0-10V voltage signals.
–ADC Resolution: 15.6 – 15.9 bits, depending on the output signal type.
–Power Requirement: External 24 VDC power supply.
–Isolation Voltage: 2550 VDC, duration of 850 seconds.
–Max Output Load: 7 ohms.
Dimensions and Weight:
–Dimensions: Approximate size, as the exact dimensions may vary, but it is a single-slot module designed for rack mounting.
–Weight: Approximately 1.32 kg for a larger package of 10,000 units, but the individual module’s weight is likely much lighter1.
Parameters and Specifications:
–Operating Voltage: DC voltage output, supports 12V or 24V
–Output Current: 1A per channel
–Output Points: 16 points
–Logic: Positive logic
–Media Connectors: 2x RJ45 + 2x SFP
Dimensions and Weight:
–Dimensions: 130 mm x 85 mm x 45 mm (approximate)1, with some sources mentioning larger dimensions possibly including packaging or mounting space2.
–Weight: Approximately 0.5 kg1, making it lightweight and suitable for various installation environments.
Parameters and Specifications:
–Ethernet Connectivity: Enables Ethernet communication with support for 10/100 Mbps transmission rates and auto-negotiation capability.
–Protocol Support: Implements service request transmission protocol (SRTP), Modbus TCP, and Ethernet Global Data (EGD) protocol over a four-layer TCP/IP stack.
–Ethernet Processor Speed: 200 MHz
–Communication Rates: 10/100 Mbps
–Power Supply: 24VDC (with some sources mentioning an input voltage range of 12-48VDC)1
–Operating Temperature: -40°C to 70°C2, with some sources indicating -20°C to +50°C for operation and -40°C to +70°C for storage1
–Operating Humidity: 5% to 95% RH (non-condensing)21
Dimensions and Weight:
–Dimensions: 125mm x 72mm x 138mm2, with some sources mentioning a smaller size of 170mm x 105mm x 32mm1, which may refer to a different model or packaging.
–Weight: Approximately 0.5kg2, or 0.53kg for specific variations3.
Parameters:
–Input Voltage: Typically supports a range of voltages, often including 120/240 VAC and 125 VDC.
–Output Voltage: Provides stable power output required by the PLC system.
–Power Rating: Specific power ratings may vary but designed to handle the power demands of RX3i PLC systems.
Specifications:
–Series: Belongs to the RX3i series of PLC modules from GE.
–CE Certified: Ensures compliance with safety and performance standards.
–Working Environment: Designed for industrial environments, with temperature and humidity tolerances specified by GE.
Dimensions & Weight:
–Dimensions: Exact dimensions may vary slightly, but generally falls within a compact form factor suitable for panel mounting.
–Weight: Approximately 3.2kg, allowing for easy installation and maintenance.
1.Parameters:
2.Specifications:
3.Dimensions & Weight:
Parameters and Specifications:
–Model Number: IC695PSA040
–Series: PACSystems RX3i
–Power Rating: 40 Watts
–Input Voltage Range: 85-264 VAC or 100-300 VDC
–Output Voltages: +3.3 VDC (for internal RX3i modules), +24 VDC relay output (for relay modules)
–Efficiency: Greater than 90%1
Dimensions and Weight:
–Dimensions: 170mm x 105mm x 32mm2, though packaging dimensions may vary3
–Weight: Approximately 120g2, though heavier weights have been mentioned for different contexts4