Internal power consumption: < 5w.
Power supply: dc24v, but can also support ac/dc85-265v, dc-48v, dc12v.
Dimensions: 50mm x 136mm x 118mm.
Operating temperature: -10 c to +70 c (wide temperature -40 c to +75 c).
Storage temperature: -45 c to +85 c.
Humidity: 10% – 95% without condensate.
Measurement principle: Based on Faraday’s law of electromagnetic induction. When a liquid flows through a magnetic field perpendicular to the direction of flow, the flow of the conductive liquid induces a voltage proportional to the average velocity (that is, the volume flow).
Electrode materials: such as 316L (stainless steel), Hc (Hastelloy C), Ti (titanium), Ta (tantalum), etc.
Lining material: such as F4 (polytetrafluoroethylene), PUR (polyurethane rubber), etc.
Accuracy: 0.5 or 1.0 (depending on the caliber).
Repeatability: ±0.1% measurement value.
Type: Communication redundant input interface module
Brand: FOXBORO
Origin: Probably from Switzerland or Pudong, Shanghai, China
Voltage: 24Vdc±5%
Current: In the range of 0-20.4mA per channel, but up to 33mA per channel
Accuracy: ±0.075% of the range
Product type: Analog input interface module.
Input type: General purpose (analog sensor signal).
Number of analog input channels: 8.
Input range:
FBM201:0 to 20 mA DC
FBM201b: 0 to 100 mV DC
FBM201c: 0 to 5 V DC
The FOXBORO P0914XB is a slot chassis module designed for centralized architectures. It is used to install and organize FOXBORO input and output modules3. With multiple slots, the P0914XB can hold various input and output modules, and its slot capacity varies by specific model to meet different application requirements
Parameters and specifications:
Input voltage range: 85 to 265 volts AC or 108 to 145 volts DC, nominal 125 volts DC.
Input frequency range: 47 to 63 Hz.
Input current: 5.6A (RMS maximum) for 85 V AC input, 2.5A (RMS maximum) for 230 V AC input.
Output voltage: 24.0 V DC, 0.2 V DC nominal factory Settings.
The FCM2F2 P0914YZ is a Field Control Module (FCM) manufactured by Foxboro, a renowned brand in the field of industrial automation. This module plays a crucial role in industrial control systems, facilitating communication and data processing between field devices and the control system.
Power module: If it is a power module, the FBM216B P0927AJ has high performance, high stability, supports hot swap, and usually has power status indication and overload protection. In addition, it can also realize the input and output of digital signals, and supports a variety of input/output types, including switching input, fixed voltage output, fixed current output, etc.
Controller module: If it is a controller module, the FBM216B P0927AJ may be used for signal acquisition, signal processing, data communication, fault diagnosis and alarm, and control logic.
Operating voltage: For power modules, the power supply voltage is 24VDC.
Input signal type: The FBM202 can accept various input signal types, such as analog signals, digital signals, etc.
Output signal type: The type of signal output by the device, which may vary by application.
Power requirements: The specific values of the power supply voltage and current required by the FBM202 are not directly given, but the power requirements of industrial automation equipment are usually detailed in the technical manual of the equipment.
Operating temperature range: The temperature range that the device can withstand under normal operating conditions, the specific value may vary by model and application.
The FOXBORO FBM216B is a HART communication redundant input interface module designed for various industrial applications1. It plays a crucial role in integrating HART communication into industrial control systems, providing reliable and accurate input signal measurements
Parameters and Specifications:
Parameters: