argument
Voltage: 24V
Current: 100-400A (However, please note that this current range may refer to the operating current under certain conditions, and the current value may vary when used)
Output frequency: 60Hz
Sensor input: Two independent electric speed sensor inputs, such as the epro PR9266/… And PR9268/… series
Measuring range: Select the vibration speed range by toggle the switch (such as 0… 5/10/25/50/100mm/s) or amplitude range (such as 0… 25/50/100/125/250/500μm)
Temperature drift: zero: < 0.05%/K; Gain range: < 0.01%/K
Time drift: zero: < 0.01%/24 hours; Gain range: < 0.01%/24 hours
specification
Instrument category: EPRO transmitter
Model: MMS3120/022-000
Size: 127.5mm×125.75mm×80mm
The MMS6312 belongs to the sensor product family of the EPRO brand. EPRO, founded in 1970, is committed to the development and service of rotating machinery monitoring and protection systems.
Weight: Depending on the citation information, the weight of the UES815S-24A varies. For example, there is information that its weight is 650g, and there is information that its weight is 2kg, or even 0.2kg. The weight may vary depending on the product version or application scenario.
Operating temperature: Maximum temperature up to 70℃.
Frequency range: 47-63 Hz.
Accuracy: 1%.
Application: Widely used in the field of communication (such as switching equipment, access equipment, mobile communication, microwave communication and optical transmission, routers, etc.) and automotive electronics, aerospace and other fields. In addition, it is also used in chemical, petroleum, electronics, aerospace, electrical and other fields.
Parameters and specifications
Sensor input: Two independent eddy current sensor inputs, electrically isolated from power input, input impedance >100 kΩ, input voltage range 0 ~ -22 V dc, input frequency range 0 ~ 8 Hz (10 Hz /-3dB).
Measurement range: The configuration software can be continuously adjusted, the specific measurement range is 1mm to 20mm.
Sensor power supply: Each channel is powered by an independent buffer sensor, electrically isolated from the system voltage and power supply, rated voltage -26.7V dc, rated current 20mA/ maximum 35mA.
Control input: Binary input shared by two channels that controls whether the optocoupler output is on, used for channel or module prohibition.
Output voltage: AC voltage signal directly proportional to shaft vibration superimposed on DC voltage, linear range of output voltage -4 ~ -20V (supply voltage -24V), maximum range -1 ~ -22V.
Response time: Approximately 15 seconds
Technical parameters: with open and short circuit protection, as well as reverse protection. Output voltage linear range: -4V to -20V (supply voltage is -24V). Maximum output voltage range: -1V to -22V. Internal resistance: 100k. Response time: 15 (or ≤10s, depending on the source).
Accuracy: The linear error varies depending on the type of sensor connected, such as ≤1.5% when connected to PR6422, ≤6.0% when connected to PR6426, etc.
Stability: temperature drift 0.200mV /100K, sensitivity <2%/100K; Maximum time drift 0.3%; The error of supply voltage is <0.2%/V.
