BENTLY 125680-01 is a fault-safe temperature transmitter produced by Bently Nevada. It converts the signals from temperature sensors (such as thermocouples or thermal resistors) into standard output signals for monitoring and control in industrial automation systems.
Dimensions and Weight:
The exact dimensions and weight of BENTLY 125680-01 are not provided in the search results. However, it is typically designed to be compact and robust for industrial applications.
Series:
BENTLY 125680-01 belongs to the Fault-Safe Temperature Transmitter Series produced by Bently Nevada.
Type: Likely a vibration monitoring system component or sensor
Ratings: Sensor range, sensitivity, and other performance parameters would be specific to the model
Dimensions and Weight:
Exact dimensions (length, width, height) and weight are not provided here as they would be specific to the model. Please consult the manufacturer’s official documentation or contact them for these details.
BENTLY 1900/65A-01-00-01-00-00 is a sophisticated device monitor specifically designed for industrial applications. Below is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Input Channels: The module provides four sensor inputs and four temperature inputs. Each sensor input can be configured to support 2-wire and 3-wire accelerometer, speed sensors, or proximity sensors. Temperature inputs support E, J, K, and T type thermocouples, as well as 2-wire or 3-wire RTDs123.
Output Options: It offers six relay outputs, four 4-20 mA recorder outputs, and a dedicated buffered output. Users can configure the outputs based on OK, Alert, and any channel or combination of channel danger states13.
Communication Interface: The module supports Modbus gateway options, allowing it to send static variables, status, event lists, time, and date information directly to any Modbus client17. It also supports communication through an ethernet and software-configurable Modbus RS232/485 serial port17.
The BENTLY 138607-01 is a monitoring module from the Bently Nevada range of industrial machinery protection and asset condition monitoring systems. It’s designed for precision monitoring and control in various industrial applications, especially in the fields of petrochemicals, power generation, and steel production12345.
BENTLY 3500/42-01-00 Parameters, Specifications, Dimensions, Weight, Series, Features, and Applications (in English)
Parameters & Specifications:
Working Voltage: Typically operates within a range of 100-240V AC.
Operating Temperature: Ranges from -20°C to 60°C.
Operating Humidity: Up to 95% relative humidity (RH).
Vibration Measurement Range: 0-50mm/s.
Frequency Response Range: 2-1000Hz.
Dimensions & Weight:
Dimensions: Depending on the manufacturer or variant, dimensions may vary. One source lists it as 400mm x 300mm x 200mm, while another source mentions 200mm × 150mm × 50mm.
Weight: Weight can also vary based on the model. One source lists it as 10kg, while another source gives it as 1.2kg.
Series:
The BENTLY 3500/42-01-00 belongs to the 3500 series of monitoring modules, which are widely used in industrial applications for vibration and position monitoring.
BENTLEY 3500/20-01-02-00 is a high-performance module specifically designed for industrial automation and monitoring applications. Here are its key parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters & Specifications:
Measurement Range: Typically, it can measure velocities ranging from 0-25mm/s.
Frequency Range: Operates within a frequency range of 10-1000Hz.
Power Requirement: It requires AC 220V/50Hz for power supply.
Operating Temperature Range: The module can operate within a temperature range of -20℃ to 80℃.
Signal Processing: It features 2 input channels for measuring signals and provides 4 output signal channels.
Signal-to-Noise Ratio: Greater than 80dB, ensuring clear and undistorted signal transmission.
Sampling Rate: 10kHz, enabling high-speed data acquisition.
Storage Capacity: 2GB, sufficient for storing large amounts of data.
Dimensions & Weight:
Dimensions: Approximately 120mm x 80mm x 35mm in size.
Weight: Exact weight may vary depending on the configuration and accessories, but it is typically lightweight for ease of installation and handling.
BENTLY 3500/15-02-00-00 is an industrial automation controller module specifically designed for monitoring and controlling continuous production processes. Here are its key parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters & Specifications:
Voltage: Typically operates on a range of voltages, commonly 24VDC.
Current Range: Depending on the application, it can handle a range of current levels.
Dimensions & Weight:
Exact dimensions and weight may vary slightly based on the manufacturer’s specifications. However, it is designed for industrial applications and is typically compact and lightweight for easy installation and integration.
Series:
BENTLY 3500/15-02-00-00 belongs to the 3500 series of controllers, which are widely used in industrial automation systems.
BENTLY 149992-01 is a high-performance relay card specifically designed for industrial automation and monitoring applications. Here is a detailed overview of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters:
Model Number: 149992-01.
Manufacturer: Bently Nevada.
Power Supply: Typically 24 VDC.
Specifications:
Number of Relay Channels: 16 independent relay output channels.
Relay Contact Ratings: 25 A at 250 VAC or 30 A at 30 VDC.
Communication Protocol: Supports Modbus communication protocol.
Dimensions & Weight:
Dimensions: 3.5 x 3.3 x 1.3 inches (89 x 84 x 33 mm).
