The exact size and weight may vary by supplier or manufacturer, but in general, the module is a half-height, dual-channel module with dimensions (D x W x H) of roughly 25.65cm x 2.44cm x 11.99cm and a weight of 0.34kg.
Series:
The product is part of Bently Nevada’s 3500XL family.
Manufacturer: Bently Nevada (now part of Baker Hughes, owned by GE).
Series: 3500 series.
Features:
Multi-channel: A 4-channel monitor that can be programmed independently for each channel.
Modular design: Each channel provides an independent 4 to 20mA scale value.
Flexibility: Can accept and process a variety of sensor signals, including displacement, speed and acceleration.
Programmability: Each channel is programmed using 3500 frame configuration software to implement various functions such as radial vibration, axial displacement, differential expansion, eccentricity, etc.
Alarm and protection: Alarm and hazard setpoints can be set to provide mechanical protection.
3500/15-05-05-CN is part of the 3500 system, which provides continuous, in-line monitoring capabilities for mechanical protection applications and provides important information for early identification of mechanical failures.
Features:
Versatility: A wide range of input and output voltages are available for a variety of applications.
High reliability: The redundant design ensures that the system can operate normally even if a single module fails.
Easy to use: Easy to install and configure, no special training required.
Half-height module: The module must be installed in the specified slot on the left side of the rack.
LED indicator: With a variety of LED indicators, used to indicate the status of the power module.
Communication interface: Supports a wide range of serial (RS232/RS422/RS485) and Ethernet TCP/IP communication functions.
Supported protocols include the Modicon Modbus protocol (via serial communication), the Modbus/TCP protocol (serial Modbus variant for TCP/IP Ethernet communication), and the proprietary Bently Nevada protocol (for communication with 3500 rack configuration and data acquisition packages).
Power requirements: For Modbus RS232/RS422 I/O modules, the typical power consumption is 5 watts; For the Modbus RS485 I/O module, the typical power consumption is 5.6 watts.
Data refresh time: The data acquisition rate depends on the frame configuration, but the refresh time cannot exceed 1 second for all modules in the 3500 frame.
Operating temperature: It can operate in the temperature range of -22 to 150°F (-30 to 65°C).
Function: Usually used to monitor the vibration level and shaft displacement of mechanical equipment (such as engines, turbines, pumps, etc.). It can monitor the vibration level, frequency and axial displacement of the equipment in real time, and issue an alarm or take corresponding protective measures according to the preset alarm threshold.
Measurement parameters: can measure vibration parameters, such as vibration speed, vibration acceleration, vibration displacement, etc., can also measure axis displacement parameters, such as axis offset, radial displacement, etc.
Input signal range: +0.8V to -21.0V for non-isolated I/O modules; For isolated I/O modules, the range is +5V to -11V.
Power consumption: Typical power consumption is 3.2 watts.
Series: Part of the Bently Nevada 3500 series bearing vibration monitor.
Power supply voltage: 24 volts DC.
Consumption: 5 watts.
Operating temperature range: -40 to +85°C (-40 to +185°F).
Size and weight:
Size: The exact size is not directly mentioned in the search results, but a search result for 125840-01 350015 card mentions the size 50mm x 30mm x 5mm, but please note that this may not be the exact size of 125840-01.
Weight: In the search results described as a two-axis vibration monitor, it weighs 0.6 kg. In another search result describing a power module, the weight was 2KG. This may be a 125840-01 product of a different model or purpose.
