trait
Data collection: Steady state and transient dynamic (waveform) data is continuously collected and transmitted to the host software over an Ethernet link.
Mode switching: Used to switch 3500 racks between “RUN” and “Programming” modes, RUN mode prevents configuration modifications while allowing the racks to operate normally.
Static data collection: has the traditional static data collection function.
High-resolution transient data logging: An optional channel-enabled disk can be used to record dynamic, high-resolution transient data.
Communication processing capabilities: The 3500 rack contains the communication processing capabilities of the TDI, and although the TDI performs some tasks shared by the entire rack, it is not a critical component of the monitoring system.
1. Parameters
Part Number: 3500/05-01-02-00-00-01 (However, please note that the last digit of the part number in some search results is ‘0’, which may be a difference between batches or versions)
Manufacturer: Bently Nevada
Series: 3500/05
Power supply: The input voltage may be 24VDC or 48VDC, depending on the configuration and application scenario
Output voltage: 24VDC
Operating temperature range: -40℃ ~ +85℃
Storage temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 95%, non-condensing
argument
Input voltage:
High voltage AC: 175 to 264 Vac rms (247 to 373 Vac, pk), 47 to 63Hz
Low voltage AC: 85 to 132 Vac rms (120 to 188 Vac, pk), 47 to 63 Hz
HVDC: 88 to 140 Vdc
Low voltage DC: 20 to 30 Vdc
Operating frequency: 47 to 63 Hz
Out-of-limit protection: For all power supply types, low voltages will not damage the power supply or PIM, but out-of-range voltages will open fuses on the PIM
Power OK LED: When the power is working normally, the LED lights up
Operating temperature: -30℃ to +65℃ (-22 F to +150 F)
Storage temperature: -40℃ to +85℃ (-40 F to +185 F)
Product Type: Four-channel monitor with Prox/Seismic I/O module
Input: Receives input from proximity sensors and seismic sensors
Output: Provides vibration and position information and compares the adjusted signal with a user programmable alarm
Communication interface: May support a variety of communication interfaces, such as Ethernet, Modbus, etc
specification
Number of channels: four channels
Features: Vibration and position measurement, as well as user programmable alarms
Software support: Programming with 3500 framework configuration software
Parameters and specifications
Type: Relay modules, part of Bently Nevada’s product line of monitoring and control systems.
Monitoring function: The vibration level of mechanical equipment can be monitored by installing vibration sensors (such as acceleration sensors or speed sensors).
Alarm and protection: With alarm and protection functions, an alarm can be triggered when the vibration level exceeds a preset threshold or the device has an abnormal vibration mode.
Communication interface: There may be a communication interface, such as Modbus or Ethernet, for data exchange and communication with other devices or monitoring systems.
Programmability: Supports user-defined parameters and logic to adapt to different application scenarios and requirements.
Data logging: May have a data logging function to record the operating status and historical data of the device.
Size and weight
Size: The exact size may vary by model and configuration, but depending on some search results, similar products may be 138mm x 36mm x 145mm (length x width x height).
Weight: About 0.3kg. Note, however, that this is only an approximation and the weight of the actual product may vary.
argument
Display: 9 inch color LCD display
Resolution: 800 x 600
Input signal: Sensor data from the Bently Nevada 3500 monitoring system
Output signal: alarm, trend analysis data
Input voltage: 90 V to 265 V AC, input current 4.5A; Output voltage 24 V DC, output current 3.3A, power 79.2W
Efficiency: up to 85%
specification
Operating temperature: 0°C to +50°C, storage temperature: -20°C to +70°C
Manufacturing standard: Meets American Petroleum Institute Standard 670
argument
Input voltage: 24V DC
Operating temperature: -40℃~+85℃
Humidity range: 0% to 95%
Signal range: 0~10V
Sampling frequency: 10kHz
Output mode: RS485
Measurement range (for some application scenarios) : 0-5mm
Measurement accuracy: ±0.01mm
specification
Dimensions: 94mm x 30mm x 120mm (or another description as 241mm x 24.4mm x 99.1mm, which may refer to different products or parts)
Protection Level: IP65 (IP67 in some descriptions)
argument
Input signal: can receive 1 to 4 proximity sensor, speed sensor or acceleration sensor signals
Power consumption: Typical value is 7.7 watts
Input/output standard: 10kΩ (proximity sensor and acceleration input)
Output impedance: 550Ω
Sensor power supply: -24 volts DC
Direct filter: 3 dB at 15.6 Hz
Gap filter: 3 dB at 0.41 Hz
Frequency response: offset -3 dB, 0.01Hz (speed II only); Indeterminate filter -3 dB at 40 Hz (Velocity II only)
specification
Series: 3500/42M series
Type: four-channel monitor
weight
Weight: about 120g (in some cases) or 1.39kg (another source)
series
Series name: 3500 series
trait
High reliability: With high-quality electronic components and advanced circuit design, it can operate stably in harsh industrial environments
Wide input range: can adapt to different AC power input requirements, improve adaptability
High efficiency and energy saving: It has high conversion efficiency, reduces energy consumption and reduces operating costs
Multiple protection functions: including over current protection, over voltage protection, over temperature protection, etc., to protect the module itself and connected devices from power related problems
argument
Input voltage: 90 V to 265 V AC
Input current: 4.5A
Output voltage: 24 V DC
Output current: 3.3A
Power: 79.2W
Efficiency: up to 85%
Operating temperature range: -40°C to 70°C
specification
High reliability: Manufactured with high quality materials and high standards of workmanship, it can withstand harsh working conditions
High precision: provides stable output voltage and current to ensure the accuracy of measurement data
Low ripple and noise: Low ripple and noise output ensures stable power supply to sensitive equipment
Comply with various safety standards such as UL, CE and RoHS to ensure safe use
Size and weight
Dimensions: 230 mm x 127 mm x 64 mm
Weight: 2.0kg
argument
Voltage: 24V
Current: 100-400A
Operating voltage range: 85 to 264Vacrms (for some similar products)
Specifications and dimensions
Specifications: AC power module
Dimensions: Specifications may include 5x25x12cm
