The specifications of the BENTLY 3500/50-01-00 are as follows:
Number of channels: 2 channels
Receive signal: Receive input from a proximity probe or magnetic sensor
Measurement function: Determine shaft speed, rotor acceleration or rotor direction
Alarm function: The measured value is compared to a user-programmable alarm setting point and an alert is generated when the setting point is violated
Programming method: Use 3500 rack configuration software for programming
Input signal range: +10.0V to -24.0V
Input impedance: 20kΩ (standard); 40kΩ (TMR); 7.15kΩ (Internal barrier)
Power consumption: 5.8W (typical)
Front panel LED: OK, TX/RX, Bypass
The parameters of the BENTLY 3500/22M Transient Data Interface (TDI) are as follows:
Power consumption: 10.5W.
Port on the front panel: USB-B.
Ethernet interface: 10Base-T or 100Base-TX adaptive, 100Base-FX fiber Ethernet.
Reset mode: Reset button of the rack.
Data collection capability: Continuous collection of steady-state and transient dynamic (waveform) data and transmission of data to host software via Ethernet links.
Data capture capability: Using an optional channel-enabled disk can capture dynamic and high-resolution transient data.
Dual channel module: The BENTLY 3500/25 is a semi-tall, dual channel module for transferring key confidence numbers to the monitor module in the 3500 rack.
Signal conversion: When the key phase marker on the shaft is aligned with the key phase sensor, the module detects the alignment using a magnetic sensor or proximity probe and converts the input signal into a digital key phase signal.
High flexibility: The 3500 mechanical protection system can accept up to four key trust signals in normal configuration and up to eight key trust signals in paired configuration.
Accurate measurement: One or multiple event pulses per revolution of the rotating shaft or gear (called key confidence signals) can be used to accurately detect timing. As a result, the 3500 monitoring module and external diagnostic tools can measure shaft speed and vector characteristics such as 1X vibration amplitude and phase.
Data interface: instantaneous data interface (tdi).
Functions: ability to collect data by means of communication, e.g. Tdxnet.
Position: located on 3500 maps.
Compatible with software: system status monitoring 1 and diagnostic software and configuration software 3500.
Processor function: tdi contains a processor function inside the frame of 3500 communications.
Data collection capacity: ability to collect static data. However, using the switching on display via an optional channel will allow tdi to capture high resolution dynamic and instant data.
Bently 3500/50m framework is a complex system designed to protect machines and monitor condition. It offers enhanced diagnostic and monitoring capabilities to ensure the reliability and performance of critical machines.
** product parameters :**
– measuring channels: 16
– input type: voltage, current, displacement, speed
– frequency range: dc to 10 KHZ
– data storage: up to 200,000 points
– communication interface: Ethernet, rs-485, usb
– power supply: 24 v dc
– model: 3500/50
– part number: 286566-02
– compatible: compatible with bently monitoring systems
– input voltage: 24 v dc
– communication protocol: modbus TCP/IP
– operating temperature: -40 c to 85 c
– dimensions: 15.2 cm x 10.2 cm x 2.5 cm
Title: bently 3500/42m-01-00 controller
The bently 3500/42m-01-00 controller is a high-performance diagnostic and control module designed for industrial applications. It provides enhanced capacity for data collection, analysis and monitoring.
Product parameters:
– model: 3500/42m-01-00
– compatibility: industrial applications
– input channels: several
– communication interface: Ethernet, modbus
– power supply: 24v dc
This map is designed for industrial monitoring and provides reliable and accurate data for various applications.
** product parameters :**
– model: 3500/42m
– part number: 140734-02
– compatible: compatible with bently monitoring systems
– function: industrial monitoring and data collection
The system is designed to provide a reliable and versatile platform for various applications. It offers enhanced capabilities and functionality to support effective design and implementation.
** product parameters :**
– model: 128229-01
– compatibility: compatible with a wide range of systems and devices
– material: high quality durable materials
– size: standard size suitable for different applications
– weight: light for easy handling and mounting
Bently 133442-01 framework is a versatile and reliable product designed to provide a solid foundation for various applications. Thanks to long-term construction and reliable performance, it is suitable for a wide range of industries.
** product parameters :**
– model number: 133442-01
– compatibility: universal
– material: high quality alloy
– dimensions: 10 cm x 10 cm x 5 cm
– weight: 500 g
– input voltage: 24v dc
– operating temperature: -40 c to 85 c
– communication interface: Ethernet, modbus
– analog input channels: 8
– digital input channels: 16
– analog output channels: 4
– digital output channels: 8
power input : Alternating current (AC) power input is accepted, the usual input voltage range is 110VAC or 220VAC (depending on the product design)
output signal : Providing one or more output signal types, such as analog signals (voltage or current outputs) or digital signals (switching signals or digital communication protocols)
