Input signal : Processes signals from the resistance temperature detector (RTD) and thermocouple (TC).
Number of channels : six temperature monitoring channels.
Output function : no recorder output (different from 3500/61).
Specifications and dimensions :
External terminal : non-isolated version, bulkhead rack accuracy ±3°C(25°C).
Operating temperature : -30°C to +65°C.
Storage temperature : -40°C to +85°C.
Physical dimensions : 241.3mm x 24.4mm x 241.8mm (H x W x D).
Weight : 0.91 kg (2.0 lb).
overspeed inspection : Bently 3500/53 is an electronic overspeed inspection system specially designed for 3500 series mechanical inspection systems, which provides a tachometer system with high reliability and fast response, and is the ideal choice of overspeed protection system
Key parameters :
signal input : Accepts a signal from the proximity probe sensor or magnetic pickup in the range + 10.0V to -24.0V
input impedance : 20 kΩ; Typical power consumption is 8.0 Watts
sensor support : Supports a variety of Bently Nevada sensors, including 3300 series, 7200 series,
output impedance : 550Ω; Sensor power supply is 24V DC, maximum 40 MA
Input signal : can accept 1 to 4 displacement, speed or acceleration sensor signals.
Power consumption : typical value 7.7 watts.
Measuring range : 0-5g, resolution 0.01g.
Sampling rate : up to 10kHz.
output : analog signal output, BNC interface.
Part number : 3500/22M
Manufacturer : Bently Nevada
series : 3500
Input signal : -10 Vdc to +10 Vdc
power consumption : 7.7W (10.5W in other data, may be under different configuration or measurement conditions)
Physical parameters
Weight : 0.85 LBS
Dimensions : 9.50 x 4.50 x 1.00 (unit unspecified, may be in inches)
Input type : Supports resistance temperature detector (RTD) and thermocouple (TC) temperature input.
Number of channels : Six channels for temperature monitoring are provided.
function : Monitor temperature changes in real time, compare with user programmable alarm set points, trigger alarms or perform specific actions.
I/O module options include RTD/TC non-isolated and TC isolated, the latter providing 250Vdc channel isolation.
Programming and configuration : Through programming software to set the module, including channel configuration, alarm Settings, etc.
Product type : indicates the communication gateway module.
power consumption : Typical value 5.0 watts, but also said to be usually maintained at 4.75 watts.
current : Maximum current between the dry contact and the common end <1mAdc.
Communication capability : Support Ethernet TCP/IP and serial (RS232/RS422/RS485) communication.
The protocol supports : Modicon Modbus, Modbus/TCP, and the proprietary Bently Nevada protocol.
Dimensions : Height 9.5 inches (241mm), width 0.96 inches (24.4mm), depth 9.52 inches (242mm).
cable support : cable connections up to 30 meters.
Power consumption: Typical power consumption is 5.8W
Relay contact life: 100,000 cycles
Voltage tolerance: installed as standard, relay contacts can withstand 250 Vrms
2. specifications :
Model: BENTLY 3500/33-01-00
Brand: Bently Nevada
Relay type: single pole double throw (SPDT)
Type: A vibration monitoring system or sensor
Measurement Range: Vibration levels typically measured in microns (µm) or millimeters per second (mm/s)
Frequency Range: The frequency range of vibrations it can detect, typically specified in Hz
Sensitivity: The ability to detect small changes in vibration levels
Dimensions and Weight:
Exact dimensions (length, width, height) and weight are not generally provided without referencing the manufacturer’s specifications. However, it is designed for installation on or near rotating machinery.
Measuring range: depends on the specific sensor.
Accuracy: ±0.1% full scale.
Resolution: Depends on the specific sensor.
Sampling frequency: up to 10Hz.
Input signal: Support 4-20mA, 0-5V, 0-10V and other standard analog signals, and digital signals (such as Modbus, Profibus, etc.).
Output signal: Also support 4-20mA, 0-5V, 0-10V and other standard analog signals, as well as relay output (dry contact).
Power Supply: 100-240V AC, 50/60Hz, maximum power consumption 25W.
Vibration Signal Processing: The 3500/42M 140734-99 likely amplifies and filters vibration signals from sensors to prepare them for analysis.
Feature Extraction: It might extract key features from the vibration signal, such as amplitude, frequency, and overall vibration level.
Fault Detection: The module could compare extracted features to pre-defined thresholds to identify potential machine faults like bearing wear, imbalance, or misalignment.
Output Signals: Based on fault detection algorithms, the 3500/42M 140734-99 might generate output signals (alarms, machine shutdown) to warn operators and protect equipment.
Product Description: This module interfaces with proximity and seismic transducers (vibration sensors) used in the 3500/42M system. It conditions the sensor signals to provide vibration and position measurements for critical machinery components. The processed information is then used for:
The Bently 3500/53 133396-01 DCS PLC Module is a high-performance module designed for real-time monitoring and protection of critical machinery in industrial applications. It is capable of collecting and processing data from various sensors to ensure the safe and efficient operation of machines.
Product Parameters:
Input Channels: Multiple input channels for connecting to sensors and transducers
Communication Protocols: Supports various communication protocols for data transfer and integration with the control system
Operating Temperature Range: Designed to operate in a wide temperature range to suit different industrial environments
Mounting: Designed for easy mounting and integration into existing control systems
