Grid view List view

Showing 1–12 of 688 results

BENTLY 159840-01

¥5,299.00

Product Parameters

Parameter Category Specific Specifications
Module Type 3500 Series Frame Interface Module (FIM) – redundant-capable
Communication Protocols Ethernet (TCP/IP), Modbus TCP, Bently proprietary rack protocol
Rack Synchronization 1 μs clock synchronization across all I/O modules
Redundancy Support Dual FIM configuration (active/standby) with automatic failover (<50ms)
Maximum I/O Modules 16 modules per rack (with redundant FIMs)
Host System Compatibility Bently System 1 software, third-party SCADA/DCS, PLCs (Allen-Bradley, Siemens)
Diagnostic Features Rack health monitoring, module fault detection, power supply status tracking
Operating Temperature -40°C ~ 70°C
Protection Grade IP20 (rack installation)
Power Supply 24 VDC (from 3500 rack power module, e.g., BENTLY 129486-01)
Compatibility Bently 3500/05 rack, 3500/40M vibration modules, 3500/25 Keyphasor modules
Certification UL 508, CE, ATEX, IECEx, SIL 2 certified
Dimensions (L×W×H) 147 mm × 102 mm × 38 mm
Weight 0.7 kg

BENTLY 141378-01

¥2,299.00

Core Monitoring Specifications

  • Pressure Measurement Range: 0–10 bar (standard), 0–100 bar (high-pressure option), -1 to 5 bar (differential pressure)
  • Accuracy: ±0.1% of full scale (FS) at 25°C, ±0.25% FS over operating temperature range
  • Input Type: 4–20 mA (from pressure transducers), 0–10 VDC (optional)
  • Number of Channels: 8 independent, isolated channels
  • Response Time: ≤100 ms (90% of step change)

BENTLY 137110-01

¥2,599.00

Core Monitoring Specifications

  • Supported Sensors: PT100/PT1000 RTDs (2/3/4-wire), Type K/J/T/E thermocouples, thermistors
  • Temperature Range: -200°C to +850°C (thermocouples), -200°C to +400°C (RTDs)
  • Measurement Accuracy: ±0.1°C (RTDs, 0°C to +100°C), ±1°C (thermocouples, 0°C to +500°C)
  • Input Channels: 8 independent channels (configurable per sensor type)
  • Response Time: ≤200 ms (90% of step change)

BENTLY 136294-01

¥2,599.00

Product Parameters

Parameter Category Specific Specifications
Module Type 3500 Series serial communication bridge module (RS-485/RS-232)
Supported Protocols Modbus RTU (master/slave), Bently Proprietary Serial Protocol, ASCII
Communication Ports 2× RS-485 (differential), 1× RS-232 (single-ended), redundant port configuration
Baud Rate 300 – 115200 bps (configurable), auto-baud detection (9600/19200/38400 bps)
Data Transmission Latency ≤20ms (Modbus RTU)
Maximum Nodes (RS-485) 32 nodes per port
Surge Protection ±15kV ESD protection (ports), 2kV surge protection (power lines)
Operating Temperature -40°C ~ 70°C
Protection Grade IP20 (rack installation)
Power Supply 24 VDC (from 3500 rack power module, e.g., BENTLY 129486-01)
Compatibility Bently 3500/40M vibration modules, 3500/25 Keyphasor modules, legacy PLCs/DCS
Certification UL 508, CE, ATEX, IECEx, FCC Part 15
Dimensions (L×W×H) 147 mm × 102 mm × 38 mm
Weight 0.5 kg

BENTLY 136188-02

¥5,299.00

Core Communication Specifications

  • Supported Protocols: Modbus TCP/IP, OPC UA, Ethernet/IP, PROFINET, Bently proprietary API
  • Network Interfaces: 2× Gigabit Ethernet ports (RJ45), 1× fiber optic port (single-mode, optional), 1× RS-485
  • Data Transfer Rate: Up to 1 Gbps (Ethernet), 100 Mbps (fiber)
  • Latency: ≤30 ms (real-time data transmission)
  • Redundancy: Dual Ethernet ports (failover mode), fiber redundancy (optional)

BENTLY 135799-01

¥2,599.00

Product Parameters

Parameter Category Specific Specifications
Module Type 3500 Series 8-channel Form C (SPDT) relay output module
Relay Configuration 8 independent Form C (SPDT) relays (NO/NC/Common)
Contact Rating 5 A @ 250 VAC, 5 A @ 30 VDC (resistive load); 2 A @ 250 VAC (inductive load)
Alarm Functions Configurable latching, delay (0-100s), auto-reset, manual-reset
Input Signals Digital alarm signals from 3500 Series I/O modules (vibration, temperature, speed)
Diagnostic Features Relay coil open/short detection, contact wear monitoring
Operating Temperature -40°C ~ 70°C
Protection Grade IP20 (rack installation)
Power Supply 24 VDC (from 3500 rack power module, e.g., BENTLY 129486-01)
Compatibility Bently 3500/40M vibration modules, 3500/25 Keyphasor modules, 3500/05 frame controller
Certification UL 508, CE, ATEX, IECEx, SIL 2 certified
Dimensions (L×W×H) 147 mm × 102 mm × 38 mm
Weight 0.7 kg

BENTLY 135785-01

¥5,299.00

Core Monitoring Specifications

  • Speed Measurement Range: 0–100,000 RPM (configurable in 0.1 RPM increments)
  • Keyphasor Input: 1 channel (compatible with inductive, optical, or magnetic sensors)
  • Speed Accuracy: ±0.01 RPM (at steady state), ±0.1 RPM (transient conditions)
  • Phase Resolution: 0.1° (for keyphasor-based vibration analysis)
  • Alarm Thresholds: Programmable overspeed (1st/2nd stage), underspeed, and speed rate-of-change alarms

BENTLY 135613-01-00

¥2,599.00

Product Parameters

Parameter Category Specific Specifications
Module Type 3500 Series multi-channel temperature monitoring module
Input Channels 8 independent channels (per module)
Supported Sensors RTDs (PT100, PT1000, Cu50), Thermocouples (Type K/J/T/E/R/S/B)
Measurement Range -200°C ~ +850°C (thermocouples), -200°C ~ +400°C (RTDs)
Measurement Accuracy ±0.1°C (RTDs, 0°C ~ +100°C), ±1°C (thermocouples, 0°C ~ +500°C)
Resolution 0.01°C (RTDs), 0.1°C (thermocouples)
Output Signals 4-20 mA (per channel), 0-10 V analog output, digital alarm relays
Diagnostic Features Sensor open/short circuit detection, cold junction compensation (thermocouples)
Operating Temperature -40°C ~ 70°C
Protection Grade IP20 (rack installation)
Power Supply 24 VDC (from 3500 rack power module, e.g., BENTLY 129486-01)
Compatibility Bently 3500/05 frame controller, 3500/40M vibration modules, System 1 software
Certification UL 508, CE, ATEX, IECEx
Dimensions (L×W×H) 147 mm × 102 mm × 38 mm
Weight 0.6 kg

BENTLY 135137-01

¥5,999.00

Core Monitoring Specifications

  • Measurement Types: Shaft displacement (radial), thrust position, radial vibration
  • Displacement Range: 0–2 mm (8 mm proximity probes), 0–5 mm (11 mm proximity probes)
  • Vibration Range: 0–500 μm peak-peak (0–25.4 mm/s RMS)
  • Measurement Accuracy: ±0.1% full scale (displacement), ±0.5% full scale (vibration)
  • Frequency Response: 0.5–1000 Hz (vibration), DC–500 Hz (displacement)
  • Input Channels: 4 independent channels (compatible with Bently 3300 XL proximity probes)

BENTLY 133916-01

¥5,299.00

Product Parameters

Parameter Category Specific Specifications
Module Type 3500 Series vibration transducer interface module
Input Channels 4 independent channels (per module)
Sensor Compatibility IEPE accelerometers (2-10 VDC excitation), velocity sensors (0-5 V output)
Signal Conditioning Gain: 1-100x (configurable), Low-pass filter: 0.1-1000 Hz (adjustable)
Measurement Range 0-50 g (acceleration), 0-50 mm/s (velocity), 0-500 μm (displacement)
Output Signal 4-20 mA (per channel), 0-10 V analog output, digital status signals
Excitation Voltage 24 VDC ±5% (for IEPE sensors, configurable current limit: 0-20 mA)
Operating Temperature -40°C ~ 70°C
Protection Grade IP20 (rack installation)
Power Supply 24 VDC (from 3500 rack power module, e.g., BENTLY 129486-01)
Compatibility Bently 330500 accelerometers, 3500/25 Keyphasor modules, 3500/05 frame controller
Certification UL 508, CE, ATEX, IECEx
Dimensions (L×W×H) 147 mm × 102 mm × 38 mm
Weight 0.5 kg

BENTLY 133442-01

¥999.00

Core Power Specifications

  • Input Voltage: 100–240 VAC (50/60 Hz) or 120–300 VDC (dual input options)
  • Output Voltage: 24 VDC ±1% (regulated)
  • Output Current: 10 A (continuous), 15 A (peak for 10 seconds)
  • Redundancy Support: N+1 configuration (up to 4 modules per 3500 rack)
  • Efficiency: ≥92% (full load)

BENTLY 129486-01

¥2,599.00

Product Parameters

Parameter Category Specific Specifications
Module Type 3500 Series redundant power supply module
Input Voltage 100-240 VAC (50/60 Hz) or 120-300 VDC (dual redundant inputs)
Output Voltage 24 VDC ±1% (regulated)
Output Current 10 A (continuous), 15 A (peak for 10 seconds)
Load Regulation ±0.5% (full load range)
Protection Features Overvoltage, overcurrent, short-circuit, over-temperature protection
Operating Temperature -40°C ~ 70°C
Protection Grade IP20 (rack installation)
Compatibility Bently 3500/25 Keyphasor modules, 3500/40M vibration modules, 3500/05 frame controller
Certification UL 508, CE, ATEX, IECEx
Dimensions (L×W×H) 147 mm × 102 mm × 38 mm
Weight 0.8 kg
MTBF (Mean Time Between Failures) 500,000 hours (per MIL-HDBK-217F)