Showing 4777–4788 of 6576 results

ABB 3ASC25H203

¥3,265.00

Parameters and Specifications (参数和规格):

  • Input Voltage: 100-240V AC, 50/60 Hz2
  • Output Voltage: 24V DC1
  • Maximum Current: 10A1
  • Operating Temperature: -25℃~ +70℃1
  • Frequency Range: 47-63 Hz1
  • Output Accuracy: Up to 0.05%2
  • Signal Output Range: 0-22.7 mA full scale2
  • Interface: PXI3

ABB ECS086329-003

¥4,125.00

Parameters (参数) and Specifications (规格):

  • Voltage: 24V123
  • Current Range: 100-400A (may vary depending on application and configuration)12
  • Accuracy: 0.5-0.54
  • Measurement Range: 140-2104
  • Size: 2601050mm (Length x Width x Height)45

Weight (重量):

  • 2KG123

Series (系列):

  • ABB’s measurement and instrumentation products series

ABB CI867K01

¥5,236.00

Parameters (参数):

  • Communication Protocol: Profibus DP
  • Max Baud Rate: 12 Mbps
  • Number of Channels: 2

Specifications (规格):

  • Compatibility: Compatible with ABB’s AC 800M controllers
  • Topology: Supports line, star, and tree topologies
  • Diagnostics: Extensive diagnostic capabilities for fault detection and isolation

ABB 3HAC025338-006

¥6,230.00
Parameters and specifications:
Power and load: Available in multiple versions with payloads between 150 and 500kg (up to 650kg with “no wrist”).
Range of application: Large reach distances of 2.55 to 3.5m, suitable for a wide range of industrial applications, including robotics, automation and machine tools.
Protection level: Foundry expert type protection level is IP 67, suitable for harsh production environment.
Communication rate: Supports a variety of communication rates, such as 9.6kBit/s, 19.2kBit/s, etc.

ABB REF615E-G

¥6,202.00
Parameters:
Voltage: 24V
Current: Range may be 100-400A (but specific parameters may vary)
Output frequency: 50HZ
Range: For analog input modules, the range may be 100-310 (specific parameters may vary)
Specifications:
Processor: May include an on-board notebook low-power Pentium III-M /Celeron processor
Front-end bus frequency: 133/166MHz
System memory: Onboard 256M memory, can be expanded to 768M
BIOS: 2/4M Phoenix Flash BIOS
Bus expansion: Provides 1 PCI expansion slot
I/O interface: including IDE interface, serial port, parallel port, USB interface, PS/2 interface and network interface

ABB UAC317AEV1

¥4,120.00

Parameters:

  • Voltage Rating: 24 V AC/DC
  • Current Rating: Likely specific to the application, but not explicitly stated.
  • Power Factor: 0.9
  • Utilization Category: AC-3

Specifications :

  • Dimensions: 85 mm x 45 mm x 107 mm
  • Weight: 0.8 kg

ABB PFEA112-20

¥6,235.00

Parameters and Specifications:

  • Model: ABB PFEA112-20
  • Function: Tension Controller
  • Control Principle: PID Control (Proportional-Integral-Derivative)
  • Output Type: Analog
  • Number of Channels: 21
  • Output Range: 0-10V1
  • Accuracy: Up to 0.05% F.S.

ABB CI867K01

¥6,235.00

Parameters and Specifications:

  • Protocol: Modbus TCP1
  • Transmission Speed: 10/100 Mbit/s (Ch1), 10 Mbit/s (Ch2)1
  • Hot-swappable: Yes1
  • Connector: RJ-45 Female (8-pin)1

Dimensions and Weight:

  • Net Depth/Length: 127.5 mm123
  • Net Height: 185 mm123
  • Net Width: 59 mm1234
  • Net Weight: 0.62 kg1235

ABB CI546

¥4,213.00
Parameters and specifications:
Power supply voltage: 24VDC.
Input current: 250mA.
Output current: 500mA.
CPU speed: 800MHz.
Memory: 2GB.
Interface: Ethernet, serial port, USB.
Size and weight:
Size: 100mm x 75mm x 35mm.
Weight: 200g.

ABB GFD233A

¥4,250.00
Parameters and specifications:
Series: GFD233A (certain models may include suffixes such as 3BHE022294R0103).
Support system: PLC (Programmable Logic Controller) and DCS (distributed control system).
Power: Approx. 2700 (Note: this may be an example or the power of a particular model, actual may vary).
Voltage: 220V.
Frequency: 50/60HZ.
Size and weight:
Size: Approximately 263337
Weight: About 26

ABB DSQC639

¥6,203.00
Parameters and specifications:
Dimensions: 165 x 120 x 45 mm.
Weight: about 1 kg (as described in the search result [2], but note that another search result [5] mentions a total product weight of 0.76kg, which may be a slight difference between different versions or configurations).
Power supply voltage: 24 VDC.
Maximum power consumption: about 30 W.
Memory: 128 MB.
Communication interface: Ethernet, serial port, USB, etc.
Number of control axes: Up to 16 axes can be controlled.
Control accuracy: up to 0.1 micron.
Speed: up to 10 m/s.
Control period: 1ms.

ABB PPC322BE

¥3,260.00
Parameters and specifications:
Processor: PPC603E processor, main frequency is 166 MHz.
Memory: 32MB RAM and 8MB Flash as memory.
Input/output ports:
Number input: 12.
Numeric output: 8 (Note: the “8 numeric input” mentioned in the search results [1] may be an error and should be numeric output).
Analog inputs: 4.
Analog output: 4.
Communication interface:
Serial port: two RS232 serial ports and one RS485 serial port.
Ethernet interface: 1.