Grid view List view

Showing 4309–4320 of 6576 results

UNITROL 1010

¥4,259.00
argument
Rated excitation current: 10 ADC
Rated voltage: 350 VDC
Processor: 32-bit RISC processor up to 200 MHz
I/O points: up to 256 points
Communication interface: Support RS232, RS485, Ethernet and other interfaces
Power supply voltage: 24V DC
Power consumption: 20W
Flash: 6 MB (partial information)
specification
Series: UNITROL 1010 series, belongs to UNITROL 1000 series excitation system
Mounting method: wall mounted or rack mounted

DSAI130D

¥6,415.00
argument
Voltage: Usually 24V, but the specific voltage range may vary by application.
Current: Depending on some search results, the current range may be between 100-400A, but please note that this may require confirmation for specific application scenarios.
specification
Model: DSAI130D.
Series: Often mentioned together with the 3BSE003127R1, indicating that this is a specific model and series combination.
Type: Digital output module for industrial automation and control systems.

HIEE300936R0101

¥4,268.00

argument
Voltage: 24V
Current: 100-400A
specification
Type: Controller board or mainboard module
Brand: ABB
Application: Industrial automation control system
Size and weight
Weight: 2KG

SPNPM22

¥4,521.00
argument
Voltage range: DC20-50V
Current: 100-400A (mentioned in specific search results, but note that this may be a value for a specific application or configuration, not a universal value)
Operating voltage: 24Vdc/120Vac (mentioned in some descriptions)
Voltage: 24V (in some descriptions)
Net weight: 0.3kg (in some descriptions), 2KG in others, it should be noted that this may be the weight of different models or configurations
specification
Interface: 4 photoelectric isolation programmable input interface
Bus communication: RS-485 bus, support standard MODBUS-RTU protocol, up to 200 devices can be mounted
Built-in functions: Single axis controller function, support position control and speed control two modes
Subdivision ability: with 16 equal Angle constant torque subdivision, up to 200 subdivisions
dimension
Volume 118mmx76mmx33mm (in some descriptions)
weight
The net weight is 0.3kg

REX521GHHGSH05G

¥4,158.00
argument
Processor speed: 50/60 Hz
Power supply current: 1/5 A (I)
Power supply voltage: 100-120 V
Input point frequency: For high-speed input points on some cpus, such as Ch0(X0/X1) and Ch1(X4/X5) on 16EH3 and 20EH3, it is 200KHz, while other input points not listed are 10KHz collector open input points
Current properties: AC
Rated voltage: 220V
Rated operating frequency: 50Hz
Release current: 120A
Suction current: 320A
Coil power: 360W
Dc resistance: 240Ω

PFEA112-65

¥5,268.00
argument
Input voltage range: 12-48VDC
Output voltage range: 5VDC
Output current: Max. 10A
Efficiency: greater than 90%
Working voltage: DC24V (18-36V)
Power: 7.5W
Frequency: 45-65Hz
Number of tension units: 2
Excitation signal current: 0.5Ams, 330Hz
specification
Processor:
In some descriptions it is a 32-bit RISC processor
Another is a 16-bit processor module with 64 KB of user program memory and 32 KB of data memory
Number input: 16
Digital output: 16
Analog inputs: 8
Power Supply: 24 V AC/DC
Size and weight
Dimensions: 170mm x 105mm x 32mm

REX521GHHGSH51G

¥6,235.00
argument
Power input: Supports a wide range of dual redundant power inputs (12 to 48V DC). The typical working voltage is 12V/24V/48V.
Power consumption: Full load power consumption is less than 3W (5-port 100 Gigabit switch) or less than 11W (10-port Gigabit switch).
Communication interface:
5-port Standard 100 Mbit/s: Supports 1 to 5 10/100BaseT(X) RJ45 ports and 0 to 2 100BaseFX optical ports.
10-port Gigabit network management: Supports 2 to 8 10/100/1000BASE-T(X) RJ45 electrical ports and 0 to 8 1000BASE SFP ports.
specification
Protection level:
5 port 100 megabit standard type: IP30 protection grade housing.
10-port Gigabit network management model: IP40 protective housing.
EMC design: Industrial grade 4 or industrial EMC design.
Mounting mode: Available in two mounting modes: 35mm rail or wall-mounted.

UFC921A101 3BHE024855R0101

¥4,251.00
argument
Rated power: 11 kW
Rated voltage: AC 380V
Rated current: 28.7A
Frequency range: 0.5 Hz to 150 Hz
Output voltage accuracy: ±1%
specification
Support control mode: V/F control, servo control, PID control, etc
Supported functions: soft start, soft stop, overload protection, etc
Size and weight
Dimensions: 400 x 240 x 160 mm

SPASI23

¥6,235.00
Other parameters:
Insulation resistance: >500MΩ at room temperature.
Control port: CAN2.0B.
Sampling period: 100ms (for analog input module).
specification
Product type: SPASI23 may be an analog input module or a digital volume module, depending on the manufacturer and application scenario.
Number of channels: For analog input modules, there may be multiple input channels; For a digital module, there is a number of input channels to receive a digital signal.
dimension
The dimensions of the drive type are 150 x 97.5 x 53mm.
The dimensions of the analog input module are 120mm x 60mm x 80mm.
Another specification mentions dimensions of 7.37 cm x 27.18 cm x 35.81 cm, but may not be a common size for all SPASI23 modules.
weight
The weight of the drive type is approximately 0.7kg.
The weight of the analog input module is 0.5kg.
Another specification mentions a weight of 2KG

DSTC454

¥6,052.00
argument
Voltage: 24V (20V in some cases)
Current: 100-400A (although current may vary in some specifications)
Weight: May vary between suppliers and specifications, such as 2KG or 22KG
specification
Brand: ABB (in some cases may be associated with other brands, such as DCS)
Type: DCS system module, industrial robot system controller, controller board, etc
Scope of application: power plants, steel plants and other industrial areas
dimension
Dimensions: 3mm

PP220 3BSC690099R1

¥5,249.00
argument
Input type and quantity: 8-channel digital input module that can accept 120Va.c. Or DC input.
Voltage monitoring: With on-site input power voltage monitoring function, you can monitor the power supply connected to the module in real time.
Signal filtering: With the signal filtering function, the noise pulse less than the filter time can be filtered out through the configurable filter time.
specification
Brand: ABB
Model: PP220 3BSC690099R1
Control principle: Other

ABB REF615

¥5,252.00
argument
Support standards: REF615 supports IEC61850 communication standards, including Parallel Redundancy Protocol (PRP) and High Availability Seamless Redundancy Protocol (HSR), as well as IEEE 1588 v2 High Precision Time Protocol.
Protection type: Provides over current, over load, short circuit, ground fault, over voltage, under voltage, over frequency, under frequency and other protection functions.
Communication protocols: Support Modbus, DNP3, IEC 60870-5-103 and other communication protocols.
specification
Product family: The REF615 is a member of the 615 Protection Measurement and Control device family in the ABB Relion® product family.
Configuration options: The REF615 offers 12 standard configurations that can be selected and customized according to user requirements.