Grid view List view

Showing 3745–3756 of 6576 results

SDCS-CON-4-COAT-ROHS

¥4,258.00

1.‌Parameters‌:
–‌Working Voltage‌: 24VDC1
–‌Operating Temperature‌: -20°C to 60°C1
–‌Storage Temperature‌: -40°C to 85°C1
–‌Humidity‌: 5% to 95% non-condensing1

2.‌Specifications‌:
–‌Type‌: DCS Control System Module2
–‌Coating‌: Special environment coating (COAT) for enhanced durability3
–‌Compliance‌: Compliant with RoHS (Restriction of Hazardous Substances) directive1

3.‌Dimensions & Weight‌:
–‌Dimensions‌: 210mm x 95mm x 25mm1
–‌Weight‌: 0.5kg (as specified in some sources)1 or 0.4kg (as specified in another source)3

PFEA111-65

¥4,058.00

–‌Parameters‌:
–‌Work Voltage‌: DC 24V (18-36V)1
–‌Power‌: 7.5W or 8W (depending on the specific model)1
–‌Output Frequency‌: Typically 30Hz, but may vary depending on application1
–‌Excitation Signal Current‌: 0.5 Ams, 330Hz1

–‌Specifications‌:
–‌Model Number‌: PFEA111-65 (3BSE050090R65)2
–‌Measurement Principle‌: May utilize strain gauges, load cells, or other measurement techniques2
–‌Accuracy‌: Up to 0.5%, ensuring precise tension measurements3

–‌Dimensions & Weight‌:
–‌Dimensions‌: 180 x 120 x 100 mm (Height x Width x Depth)
–‌Weight‌: 1.9 kg (shipping weight may be 3 kg)

CI867K01

¥4,251.00

–‌Parameters‌:
–‌Resolution‌: 12-bit for analog input1
–‌CPU‌: Industrial-grade Cortex-A8 embedded microprocessor, 720MHz1
–‌Memory‌: 512MB DDR2 SDRAM, 1GB NAND Flash1
–‌USB‌: High-speed USB 2.0 Host1
–‌Network Interface‌: 10/100/1000Mbps, supporting IEEE1588 Precise Time Protocol1

–‌Specifications‌:
–‌Type‌: Interface communication module, model 3BSE043660R12
–‌Input/Output‌: Supports RS232, RS485, CAN, and USB interfaces1
–‌Display Interface‌: Standard VGA, up to 1280×854 resolution1
–‌Protection‌: 15KV air discharge and 8KV contact discharge protection

P-HA-RPS-32200000

¥6,529.00

1.‌Parameters‌:
–‌Input Voltage‌: Typically 24VDC, but some sources mention compatibility with 115-220VAC12
–‌Output Current‌: Maximum output current of 10A1

2.‌Specifications‌:
–‌Power Rating‌: Capable of providing sufficient power for various industrial automation components1
–‌Compatibility‌: Compatible with PLC systems and potentially other industrial automation equipment1
–‌Communication Protocol‌: Supports Modbus TCP/IP for data communication1

3.‌Dimensions & Weight‌:
–‌Exact Dimensions‌: 10cm × 12cm × 4cm1
–‌Weight‌: Approximately 0.5kg

DSSR122M

¥4,158.00

–‌Parameters‌:
–‌Operating Voltage‌: 24V DC12
–‌Output Frequency‌: Standard kHz (specific value not provided)3
–‌Current‌: 100-400A (compatible range for I/O modules)2

–‌Specifications‌:
–‌Type‌: Programmable Processor/Module, suitable for automation integration control systems1
–‌Accuracy‌: Not explicitly stated for the module itself, but related products may have accuracies such as absolute precision error of +/- 0.2% full scale at 77°F (25°C)4
–‌I/O Capability‌: Supports DI818 and DO818 I/O modules2

–‌Dimensions & Weight‌:
–‌Weight‌: 2KG

NDCU-21C

¥4,108.00

–‌Parameters‌:
–‌Voltage‌: 380-690 V AC1, 24V (in some contexts)23
–‌Power‌: 0.75-7.5 kW1
–‌Frequency‌: 0-60 Hz1
–‌Control Modes‌: Speed control, torque control, position control1

–‌Specifications‌:
–‌Type‌: Drive Control Unit1
–‌Communication Interfaces‌: Modbus, Ethernet1
–‌Protection Rating‌: IP671

–‌Dimensions & Weight‌:
–‌Weight‌: 2KG

PP845

¥6,052.00

1.‌Parameters & Specifications‌:
–‌Model/Code‌: PP845
–‌Material‌: Polypropylene (PP) in some cases12, while in others, it could refer to a specific product or module34.
–‌Density‌: 0.9g/cm³, typical for polypropylene12.
–‌Melt Flow Rate (MFR)‌: 12g/10min, indicating the material’s flowability12.
–‌Tensile Strength‌: 30.9MPa, demonstrating the material’s resistance to breaking under tension12.

2.‌Dimensions & Weight‌:
–‌Dimensions‌: For polypropylene material, it is typically in granular form12. For the PP845 as a product or module, dimensions vary. For example, in one case, it’s a touch panel with dimensions of 115mm x 48mm x 150mm3, while in another, it’s part of a series with no specific dimensions mentioned5.
–‌Weight‌: For polypropylene material, weight is not applicable at the granular level. For PP845 as a product or module, weights vary, such as approximately 1.2kg for a specific touch panel3 and 2KG for another unspecified product4.

PFEA111-65 3BSE050090R65

¥6,509.00

1.‌Parameters‌:
–‌Work Voltage‌: 24VDC12
–‌Measurement Range‌: 0~65N1
–‌Control Mode‌: PID control1
–‌Current Output‌: 0/4~20mA1
–‌Digital Communication Interface‌: RS232/4851

2.‌Specifications‌:
–‌Frequency Range‌: 0.1 Hz to 100 kHz for wave outputs1
–‌Accuracy‌: 130 ppm (frequency < 10 kHz) and 50 ppm (frequency > 10 kHz) for sine and ramp waves1
–‌Power Consumption‌: 8 watts (24V)2
–‌Fuse‌: 2A, 250V slow-blow2

V4550220-0100

¥5,202.00

1.‌Parameters‌:
–‌Brand‌: ABB12
–‌Voltage‌: 220V3
–‌Power‌: 100W3

2.‌Specifications‌:
–‌Type‌: Controller, possibly a DCS (Distributed Control System) module or a card controller12
–‌Compatibility‌: Suitable for use in automation control systems4
–‌Interface‌: Etherner communication interface1

3.‌Dimensions & Weight‌:
–‌Dimensions‌: 10cm x 10cm x 5cm3
–‌Weight‌: 500g3, though another source mentions approximately 1.60kg

DSAI130A

¥4,251.00

–‌Parameters‌:
–‌Voltage‌: Typically 24VDC12.
–‌Power Consumption‌: 5W12.
–‌Communication Speed‌: Up to 921Kbps12.

–‌Specifications‌:
–‌Compatibility‌: Works with various control systems, including factory automation, SCADA systems, medical, and transportation equipment12.
–‌Ports‌: Offers 4 to 32 port options12.
–‌Bus Speed‌: Achieves 66MHz bus speed through the Control Unity ASIC chip12.

–‌Dimensions & Weight‌:
–‌Physical Size‌: 324mm x 225mm x 22.5mm1.
–‌Weight‌: Approximately 0.32kg

DSDX452

¥6,529.00

1.‌Parameters‌:
–‌Input Voltage Range‌: Typically 12-48VDC, suitable for a wide range of industrial applications1.
–‌Output Voltage‌: 5VDC, offering a stable power output for connected devices21.
–‌Output Current‌: Up to 10A, depending on the specific model and application21.

2.‌Specifications‌:
–‌Efficiency‌: Greater than 90%, indicating high energy conversion efficiency21.
–‌CPU‌: Equipped with a 32-bit RISC processor, ensuring fast and reliable processing1.
–‌Communication Protocols‌: Supports multiple communication protocols, including Ethernet, CAN bus, and PROFIBUS, facilitating seamless integration into various industrial automation systems3.

3.‌Dimensions & Weight‌:
–‌Dimensions‌: Approximately 170mm x 105mm x 32mm
–‌Weight‌: Around 120g to 2KG

DSDX451

¥4,025.00

–‌Parameters‌:
–‌Voltage Range‌: Suitable for 24 VDC to 240 VAC/DC12.
–‌Input/Output‌: 20 digital inputs (24 V) and 12 digital outputs12.
–‌Minimum Load‌: 2.5 VA for AC/DC, 100 mA for 24 VDC12.

–‌Specifications‌:
–‌Interface Type‌: PROFIBUS DP3.
–‌PROFIBUS DP Rate‌: 960 kbps, 1.5 Mbps, 3 Mbps3.
–‌Node Address‌: 0 to 313.
–‌Power Supply‌: 24 VDC3.
–‌Power Consumption‌: 5W3.

–‌Dimensions & Weight‌:
–‌Dimensions‌: 110mm x 60mm x 25mm3.
–‌Weight‌: 200 grams